3D characterization of coarse aggregates

A new and accurate characterization method for dimensions, shape and roughness of aggregate particles has been developed. The method is based on the 3D-laser scanning technique and evaluation of coarse-grain aggregate-particle images. Parameters are obtained with either analytical Fourier analysis or geometrical analysis. The results from the two methods are compared with each other as well as with manual measurements. Although the Fourier-based analysis gives about 10% smaller size values, the comparison of the results shows, in general, a good agreement between the different techniques. This new method for analysis of coarse-grain aggregates gives reliable results for both the shape and topographical parameters of particles.     

How to obtain alert velocity thresholds for large rockslides

A reliable forecast of the failure stage of large rockslides is difficult, because of non-linear time dependency of displacements and seasonal effects. Aim of this paper is to suggest a practical method to prepare alert thresholds for large rockslides, assessing critical values of velocity for carrying out civil protection actions using monitoring data. Adopted data concern the 20 Mm³ Ruinon rockslide (Valfurva, Central Alps, Italy), still evolving and suitable to originate a fast moving rock avalanche. Multitemporal analysis of aerial photos, LIDAR-ALTM laser topography, field survey and geomechanical analyses allowed to infer the rockslide kinematics and better understand data provided by a monitoring network including distometers, extensometers, GPS benchmarks and inclinometers. The analysis of displacement and rainfall data over five years (1997–2001) allowed to recognise three different evolutionary patterns of displacements, showing a continuously increasing rate since 1997. Data representing large-scale behaviour of the rock mass were fitted by power-law curves, according to the “accelerating creep” model by Voight, in order to evaluate a suitable failure time. This was hampered by the large seasonal deviations, which can significantly delay the occurrence of failure. Data were fitted using the Voight’s equation, expressed in terms of displacement, through non-linear estimation techniques, in order to find values of the controlling parameters (A, α and t_f) suitable to represent the mechanical behaviour of the rock mass approaching the failure. This allowed to compute velocity–time theoretical curves and to define different velocity threshold values (pre-alert, alert and emergency) to be used for emergency management.     

Spatially irregular sedimentation in a small, morphologically complex lake: implications for paleoenvironmental studies

A sub-bottom acoustic survey of Devil Lake on the Canadian Shield in southern Ontario reveals three acoustic facies: (I) a moderately acoustically transparent, laminated sequence interpreted as a glacilacustrine deposit in glacial Lake Iroquois or a subsequent phase in water depths up to 200 m greater than at present, (II) a transitional more transparent, less layered facies interpreted as being deposited in a more distal glacial lake from erosion of sediment in the watershed exposed by the failure of the ice dam and lowering of the glacial lake before stabilization by the development of forests, and (III) an acoustically transparent facies with similar transmissivity to the water column, interpreted as Holocene gyttja. Each is spatially variable in extent and thickness in response to those processes. There is only a very weak relation between sediment thickness and the water depth in which it was deposited. Wave processes prevent deposition in water depths less than about 6 m and evidence of erosion to the greatest depths of the lake (>40 m) is pervasive. The data demonstrate the value of acoustic survey in assessing lacustrine processes and the history of lakes, and the significance of such documentation in planning a coring program and in interpreting the results.     

Natural environmental changes and human impact reflected in sediments of a high alpine lake in Switzerland

From the high alpine Sägistalsee (1935 m a.s.l.), 13.50 m of continuously laminated sediments comprising the last 9050 years, were analyzed. Even though Sägistalsee is a high elevation site, human-induced environmental changes start as early as 4300 cal. BP and leave a clearly detectable signal in the mineralogy of the sediments, which is much stronger than the signal from natural environmental changes that occurred before this time. Variations in the physical and mineralogical sediment properties of this clastic sequence reflect erosional changes in the catchment, where almost pure limestone contrasts with carbonaceous, quartz-bearing marl, and shist. The calcite/quartz (Cc/Qz) ratio was found to be most indicative of these changes, which occurred around AD 1850 and at 650, 2000, 3700, and 6400 cal. BP. The first four are interpreted as erosion events, which are related to human-induced changes in the vegetation cover and land use. We associate them to the recent development of tourism and grazing, the medieval intensification of pasturing, Roman forest clearance, and Bronze Age forest clearance, respectively. The Cc/Qz-ratio increases significantly within less than 100 years during these events, reflecting the erosion of unweathered or poorly weathered soils. The time intervals in between are characterized by a gradually decreasing Cc/Qz-ratio and reflect the stabilization or formation of new soils. Only the change at 6400 cal. BP, which represents the initial gradual stabilization of the catchment, is related to the immigration of Picea abies.     

应县木塔地基工程地质勘测与分析

对山西应县木塔环境地质进行了研究,弄清了地层年代及存在的断层;通过样品分析、标准贯入及静探等方法试验、测试,得出了塔院区塔基土的工程物理性质和力学性质、承载力;用地学层析成像技术探测了木塔的基础结构及塔院地基的分层结构。     

矿产资源资产与市场优化配置

将土地资产的理论与经验引进矿产资源管理，探讨建立和完善社会主义矿产资源市场经济制造，指出实现矿产资源性资产的市场机制是资源优化配置的一种十分重要的手段。它能够通过各级政府规划或者指导对资源的形势研究，预测其供求、价格和竞争之间的相互作用和影响。推动资源的科学利用与有效保护，合理流动与分配，提高资源利用率，从而促进社会经济的可持续发展。探讨和创建矿产资源性资产与产权管理的新机制，其实质是采矿权人根据国家法律，按统一的技术规定、规程、标准和要求，对其占用的资源储量进行定期或不定期的检测，编制相应的动态报表、年度报告和统计报表。国家根据矿种类型，通过省市县建立不同层次的矿产资源储量数据库进行产权管理。政府的监督管理主要由矿产资源储量登记与统计及核查机制组成。     

地震储层描述技术的应用效果

随着勘探程度的不断提高和油气勘探技术的不断发展,岩性油气藏勘探已成为主要的勘探目标,对三维地震储层描述新技术、新方法的要求越来越迫切.精细三维地震属性分析技术和储层识别标定技术以及测井约束反演技术的综合应用,形成了一套完善可行的技术系列,相继发现了辛154、王541、牛871等区块.地震储层描述技术的应用效果十分明鲜.     

加卸载响应比(LURR)理论的实验研究

利用大尺度岩石试件破坏声发射实验，对加卸载响应比(Load/Unload Response Ratio)理论进行了实验研究。实验采用的加载条件力求能够模拟地下岩石的复杂受力过程。在加载过程中，岩石试件内部出现的损伤用声发射技术进行了记录。实验数据经过分析之后所得的结论与加卸载响应比理论预测的结果相符合。把加卸载响应比值Y的变化情况与声发射事件定位的过程相对比，也可以进一步看出岩石材料内部的损伤发展过程与加卸载响应比Y值的变化具有一致性。而高Y值的异常情况出现，又是在材料发生最终破坏之前，所以，可以用加卸载响应比理论定量地分析岩石试件损伤演化情况，从而对岩石材料的破坏及地震做出预测。实验结果再一次验证了加卸载响应比理论。     

Acoustic and electromagnetic properties of soils saturated with salt water and NAPL

Electrical, seismic, and electromagnetic methods can be used for noninvasive determination of subsurface physical and chemical properties. In particular, we consider the evaluation of water salinity and the detection of surface contaminants. Most of the relevant properties are represented by electric conductivity, P-wave velocity, and dielectric permittivity. Hence, it is important to obtain relationships between these measurable physical quantities and soil composition, saturation, and frequency. Conductivity in the geoelectric frequency range is obtained with Pride's model for a porous rock. (The model considers salinity and permeability.) White's model of patchy saturation is used to calculate the P-wave velocity and attenuation. Four cases are considered: light nonaqueous phase liquid (LNAPL) pockets in water, dense nonaqueous phase liquid (DNAPL) pockets in water, LNAPL pockets in air, and DNAPL pockets in air. The size of the pockets (or pools), with respect to the signal wavelength, is modeled by the theory. The electromagnetic properties in the GPR frequency range are obtained by using the Hanai–Bruggeman equation for two solids (sand and clay grains) and two fluids (LNAPL or DNAPL in water or air). The Hanai–Bruggeman exponent (1/3 for spherical particles) is used as a fitting parameter and evaluated for a sand/clay mixture saturated with water.Pride's model predicts increasing conductivity for increasing salinity and decreasing permeability. The best-fit exponent of the Hanai–Bruggeman equation for a sand/clay mixture saturated with water is 0.61, indicating that the shape of the grains has a significant influence on the electromagnetic properties. At radar frequencies, it is possible to distinguish between a water-saturated medium and a NAPL-saturated medium, but LNAPL- and DNAPL-saturated media have very similar electromagnetic properties. The type of contaminant can be better distinguished from the acoustic properties. P-wave velocity increases with frequency, and has dissimilar behaviour for wet and dry soils.     

Characterisation of the 1997 Vulcanian explosions of Soufrière Hills Volcano,Montserrat, by video analysis

The activity of Convention at Montserrat Soufrière Hills Volcano, Montserrat, during the period 1995–1999 included numerous violent explosions. Two major cycles of Vulcanian explosions occurred in 1997: a first of 13 explosions between 4 and 12 August and a second of 75 between 22 September and 21 October. The explosions were short-lived events lasting a few tens of seconds during which partial fountain collapse generated pyroclastic surges and pyroclastic flows, and buoyant plumes ascended 3–15 km into the atmosphere. Each explosion discharged on average 3×10⁵ m³ (dense-rock equivalent, DRE) of magma, draining the conduit to depths of 1–2 km. The paper focuses on the first few seconds of three explosions of the 75 that occurred in September/October 1997: 6 October 1997 at 17:50, 7 October 1997 at 16:02 and 9 October 1997 at 12:32. Physical parameters such as exit velocities, magmatic water contents and magma pressures at fragmentation are estimated by following and modelling the ascent of individual momentum-dominated finger jets visible on videos during the initial stages of each explosion. The model treats each finger jet as an incompressible flow sustained by a steady flux of gas and particles during the few seconds of ascent, and produces results that compare favourably with those using a multiphase compressible code run using similar eruptive parameters. Each explosion reveals a progressive increase in eruptive intensity with time, jet exit velocities increasing from 40 m s^–1 at the beginning of the explosion up to 140 m s^–1 after a few seconds. Modelling suggests that the first magma to exit was largely degassed, whereas that discharged after a few seconds contained up to 2 wt% water. Magma overpressures up to ~10 MPa are estimated to have existed in the conduit immediately prior to each explosion. Progressive increases in jet exit velocity with time over the first few seconds of each explosion provide direct evidence for strong pre-eruptive gradients in water content and magma pressure in the upper reaches (probably 100–500 m) of the conduit. Fountain collapse occurred during the first 10–20 s of each explosion because the discharging jets had bulk densities up to 100 times that of the atmosphere and were unable to entrain enough air to become buoyant. Such high eruptive densities were due to the presence of partially degassed magma in the conduit.Editorial responsibility: A. Woods