Ground motion characterization and seismic hazard assessment in Spain: context,problems and recent developments

This article points out some particular features conditioning seismic hazard assessments (SHA) in Spain, a region with low–moderate seismicity. Although sized earthquakes occurred in the past, as evidenced by historical documents and neotectonic studies, no large events occurred during the last decades. The absence of strong motion records corresponding to earthquakes with magnitude larger than 5.5 is an important obstacle for the development of ground motion models constrained by local data, with the consequent difficulty in SHA studies. In this paper, some recent developments aiming at providing solutions to these difficulties are presented. Specifically, a strong motion databank containing a massive collection of accelerograms and response spectra from different configurations source-path-site corresponding to earthquakes all over the world is introduced, together with software utilities for its management. A first application of this databank is the development of specific ground motion models for Spain and for the Mediterranean region that predict peak ground accelerations as a function of several definitions of magnitude, distance and soil class. The predictive power of these ground motion models is tested by contrasting their estimates with recently recorded ground motions. The comparison between our ground-motion models with others proposed in the literature for other areas reveals a regular overestimation of the expected ground motions at Spanish sites by the non-local models. Consequently, SHA studies based in external models may overestimate the predicted hazard at the Iberian sites. In the last part of the paper a method for checking whether the response spectra proposed in the Spanish Building Code (NCSE-02) are consistent with actual accelerometric data from recent low magnitude earthquakes is applied. The spectral shapes of the Spanish Building Code NCSE-02 are compared with the response spectral shapes deduced from the available accelerograms by normalising the response spectra with the recorded PGA. It is appreciated that the NCSE-02 spectral shapes are exceeded by a large number of actual spectral shapes for short periods (around 0.2 s), a result to be taken into account in further revisions of the NCSE-02 code. The issues tackled in this work constitute not only an improvement for ground-motion characterisation in Spain, but also provide guidelines of general interest for potential applications in other regions with similar seismicity.     

Spatial and temporal structure of the Denmark Strait Overflow revealed by acoustic observations

In spite of the fundamental role the Atlantic Meridional Overturning Circulation (AMOC) plays for global climate stability, no direct current measurement of the Denmark Strait Overflow, which is the densest part of the AMOC, has been available until recently that resolve the cross-stream structure at the sill for long periods. Since 1999, an array of bottom-mounted acoustic instruments measuring current velocity and bottom-to-surface acoustic travel times was deployed at the sill. Here, the optimization of the array configuration based on a numerical overflow model is discussed. The simulation proves that more than 80% of the dense water transport variability is captured by two to three acoustic current profilers (ADCPs). The results are compared with time series from ADCPs and Inverted Echo Sounders deployed from 1999 to 2003, confirming that the dense overflow plume can be reliably measured by bottom-mounted instruments and that the overflow is largely geostrophically balanced at the sill.     

3D image-based characterization of fluid displacement in a Berea core

Improved network flow models require the incorporation of increasingly accurate geometrical characterization of the microscale pore structure as well as greater information on fluid–fluid interaction (interfaces) at pore scales. We report on three dimensional (3D) pore scale medium characterization, absolute permeability computations for throat structures, and pore scale residual fluid distribution in a Berea core. X-ray computed microtomography combined with X-ray attenuating dopants is used to obtain 3D images of the pore network and to resolve phase distributions in the pore space.     

预破裂中声波信号参数特性

通过对岩石样品进行变形及破坏试验，研究断裂形成过程中的声发射记录（ＡＥ），以找到能解释地震前兆现象的方法．另外，对试验过程中获得的大量数据及资料进行了数理统计处理．     

声波在两种多孔介质界面上的反射和透射

本文导出了声波在两种多孔介质界面上反射、透射的一般计算公式.作为例子,数值计算了P₁波入射于界面时,P₁、P₂和S波的反射、透射系数与声波频率、入射角等量之间的关系.结果表明,各种模式波的反射、透射系数与入射角、多孔介质性质有关,在Biot特征频率附近与频率有关,并用界面两侧的法向能流相等验证了结果的正确性.若把多孔介质当作均匀固体处理,将会得到显著不同的结果.     

岩石蠕变破坏实验研究及其对地震预报的意义

通过对不同温度和围压条件下济南辉长岩的蠕变破坏实验结果和声发射特征分析,本文提出以岩石蠕变破坏应变做为岩石蠕变破坏判据。建立了岩石蠕变破坏应变的经验关系式。依据实验结果得到相应的济南辉长岩蠕变破坏应变参数,进一步探讨了预报岩石蠕变破坏和地震的方法     

Barometric pumping effects on soil gas studies for geological and environmental characterization

Data from two free soil gas sampling programs are evaluated for the effects of barometric pumping over time on measured soil gas volumes. One program collected data from the trapped atmosphere immediately above two hazardous waste landfill areas. Of these areas, one had extremely high soil gas emanations, whereas the other had a more modest soil gas release. The second experimental program involved the collection of free soil gas samples on a rough grid with an approximate spacing of 1.6 km over a 720-sq-km area. This reconnaissance effort was designed to establish regional soil gas background values and to establish the utility of this method as a geological mapping tool in the Atlantic Coastal Plain. Methane, ethane, propane, and hydrogen data are used for this study. The data suggest that there is a predictable change in soil gas volume with a given change in barometric pressure. The rate of change is greater with large soil gas volumes in permeable soils versus lower soil gas volumes in impermeable soils; however, a simple linear relationship seems to generate a predictable curve with a margin of error of approximately 50%. Furthermore, the results of this study indicate that barometric pumping effects should be strongly considered during soil gas screening efforts at hazardous waste sites as well as in regional studies for hydrocarbon source potential mapping.     

Estimation of abl Parameters Using the Vertical Velocity Measurements of an Acoustic Sounder

The friction velocity, the surface heat flux and the height of the Atmospheric Boundary Layer (ABL) are important parameters. In this work, vertical velocity variance ( _w ² ) and wind velocity structure parameter (C _v ² ) profiles estimated by acoustic sounder measurements are used, along with similarity relations, to estimate these parameters in the unstable Atmospheric Boundary Layer and the friction velocity in the stable one. The data were collected by two acoustic sounders with different height range and resolution under various atmospheric conditions (stability) and at two experimental sites in different terrain. The C _v ² profiles are estimated using gate difference of the vertical velocity measurements and the assumption of local isotropy. The vertical velocity data are corrected for the significant effects of noisy measurements and sampling volume averaging on the _w ² and C _v ² estimations using original techniques that are presented in this work. The results of the similarity method using acoustic sounder data are compared against estimates of the corresponding atmospheric parameters obtained from direct measurements. The comparison confirms the ability of the method to provide reasonably accurate estimates of these parameters especially in the middle of the day.     

Electricity consumption patterns within cities: application of a data-driven settlement characterization method

ABSTRACT

Urban areas presently consume around 75% of global primary energy supply, which is expected to significantly increase in the future due to urban growth. Having sustainable, universal energy access is a pressing challenge for most parts of the globe. Understanding urban energy consumption patterns may help to address the challenges to urban sustainability and energy security. However, urban energy analyses are severely limited by the lack of urban energy data. Such datasets are virtually non-existent for the developing countries. As per current projections, most of the new urban growth is bound to occur in these data-starved regions. Hence, there is an urgent need of research methods for monitoring and quantifying urban energy utilization patterns. Here, we apply a data-driven approach to characterize urban settlements based on their formality, which is then used to assess intra-urban urban energy consumption in Johannesburg, South Africa; Sana’a, Yemen; and Ndola, Zambia. Electricity is the fastest growing energy fuel. By analyzing the relationship between the settlement types and the corresponding nighttime light emission, a proxy of electricity consumption, we assess the differential electricity consumption patterns. Our study presents a simple and scalable solution to fill the present data void to understand intra-city electricity consumption patterns.     

Tar ball frequency data and analytical results from a long-term beach monitoring program

Following the spill of fuel oils from the New Carissa in February 1999, approximately 300 km of beaches on the Pacific coast of North America were surveyed. A long-term observation program focused on the documentation of stranded tar balls in the vicinity of the spill site. Systematic beach surveys which were conducted over the period March 1999 to April 2001 and semi-logarithmic scale, time-series plots proved the most useful format for identifying trends. Beach monitoring continued through to August 2001. by which time 212 tar balls had been analyzed by GC/MS for their chemical characteristics. The samples of tar balls collected between February 1999 and August 2001 were qualitatively compared with New Carissa source oils (NCSO) and 101 (48%) were not consistent with NSCO. The presence of tar balls that are not related to an incident can confound attempts to define cleanup or endpoint criteria and to assess possible injury to natural resources.