Improved treatments for evaluating horizontal magnetic components through the 3-D FDM in E -polarization induction problems

To improve the accuracy of the numerical evaluation through the 3-D finite difference method, the surface boundary conditions are added to modify the old program. The author has tested the new program by making calculations for the model constructed by Wanamaker, et al (1984). The comparison between the numerical results obtained from this paper and those by Wannamaker, et al (1984) indicates that a pronounced improvement is realized in the evaluation of the horizontal magnetic components. Moreover, better calculations for the vertical magnetic components are also obtainable by using the new program.     

The interpretation of reaction textures in Fe‐rich metapelitic granulites of the Musgrave Block,central Australia: constraints from mineral equilibria calculations in the system K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3

Fe‐rich metapelitic granulites of the Musgrave Block, central Australia, contain several symplectic and coronal reaction textures that post‐date a peak S2 metamorphic assemblage involving garnet, sillimanite, spinel, ilmenite, K‐feldspar and quartz. The earliest reaction textures involve spinel‐ and quartz‐bearing symplectites that enclose garnet and to a lesser extent sillimanite. The symplectic spinel and quartz are in places separated by later garnet and/or sillimanite coronas. The metamorphic effects of a later, D3, event are restricted to zones of moderate to high strain where a metamorphic assemblage of garnet, sillimanite, K‐feldspar, magnetite, ilmenite, quartz and biotite is preserved. Quantitative mineral equilibria calculations in the system K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–Fe₂O₃ (KFMASHTO) using Thermocalc 3.0 and the accompanying internally consistent dataset provide important constraints on the influence of TiO₂ and Fe₂O₃ on biotite‐bearing and spinel‐bearing equilibria, respectively. Biotite‐bearing equilibria are shifted to higher temperatures and spinel‐bearing equilibria to higher pressures and lower temperatures in comparison to the equivalent equilibria in K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (KFMASH). The sequence of reaction textures involving spinel is consistent with a D2 P–T path that involved a small amount of decompression followed predominantly by cooling within a single mineral assemblage stability field. Thus, the reaction textures reflect changes in modal proportions within an equilibrium assemblage rather than the crossing of a univariant reaction. The D3 metamorphic assemblage is consistent with lower temperatures than those inferred for D2.     

月壤中的氦-3

除了极少数非常陡峭的山脉与撞击坑和火山通道的峭壁外，整个月球表面几乎都被一层厚度不等的月尘、岩屑和岩块的混合堆积物即月壤所覆盖。由于月球无大气层等特殊环境，太阳光长驱直入，太阳风粒子直接注入到月壤细小颗粒上使月壤中富含稀有气体等太阳风粒子组分。本文在系统阐述月壤的形成过程与形成机制的基础上，分析了月壤中稀有气体的来源及其浓度与月壤的成熟度、月壤颗粒大小、月壤矿物组成和化学成分的相关关系，进而利用已有的探测数据和分析结果，对月壤中氦-3资源的开发利用前景进行了初步评估。     

真空-堆载预压处理高速公路软基的有限元计算

根据高速公路路基的变形特点，提出了真空-堆载联合预压法处理软基的三维Biot固结有限元计算模型，将砂井按照实际尺寸划分单元，避免了平面计算方法中的砂井处理的问题，较以往的平面数值方法更接近实际情况。结合修正剑桥模型，对某真空-堆载联合预压试验段进行了计算、分析，结果令人满意。     

陕西彬县大佛寺D4钻孔勘察地球化学研究

运用烃类勘察地球化学方法，对鄂尔多斯盆地南部彬县大佛寺井田钻遇中休罗统煤层的耽钻孔，进行了垂向剖面多指标的综合地球化学研究。结果表明：剖面中所有岩样中的烃类物质均为热解烃生成初期演化阶段的煤成烃产物，具明显的同一性；由煤层至地表黄土，所有岩样中的烃类呈明显的、规律性垂直向上运移。这证实地下煤层烃类在近地表具有很好的地球化学信息显示，利用勘察地球化学方法找煤／煤层气是可行的。     

利用高铁钾长石粉合成13X沸石分子筛的实验研究

对江苏丰县的富钾页岩进行预处理，得到钾长石含量达76．4％的钾长石粉，其Fe2O3含量高达7．52％。以此钾长石粉为原料经过焙烧处理、水热合成实验，在铁含量较高情况下成功合成了13X沸石分子筛，并采用正交实验法确定了优化工艺参数。对实验产物的主要性能测试表明，合成的富铁沸石产品与13X沸石分子筛工业产品相似，吸附量达到国家化学工业产品标准，可用于对含重金属离子废水的吸附处理。     

矿山工程裂隙破碎带的三维地震模式识别原理及应用效果

本文从时间域、频率域、三维空间域介绍了矿山工程裂隙破碎带主要的地震运动学、动力学属性参数,包括相对振幅、波峰相位时间、相似系数、主频带能量、三维空间时间梯度和相干系数等,提出了矿山工程裂隙破碎带三维地震属性的去噪平滑、归一化、相关分析、特征变换的处理方法以及裂隙破碎带的模式识别原理与方法,并用实例说明了该方法的应用效果。结果表明:模式识别法对于解释矿山工程的裂隙破碎带是有效的,并具有广阔的应用前景。