满足给定数字特征和谱的随机信号的产生

本文给出了满足给定数字特征和谱的随机序列的产生方法，即用无记忆非线性变换实现非正态随机信号的模拟．该法与Ｇｕｊａｒ法相比较，放宽了变量概率分布的限制，只要求变量矩的存在。同时考虑无记忆非线性变换对谱的影响，用异于Ｌｉｕ的方法在频域上求解输入正态分布随机序列的谱．     

Dynmnic Response Analysis for Embedded Large-Cylinder Breakwaters Under Wave Excitation

A numerical model is developed for dynamic analysis of large-cylinder breakwaters embedded in soft soil. In the model, the large cylinder is taken as a rigid body divided into elements and the soft soil is replaced by discrete 3D nonlinear spring-dashpot systems. The numerical model is used to simulate the dynamic response of a large-cylinder breakwater to breaking wave excitation. The effects of the dynamic stress-strain relationship models of the soil, the radius and embedded depth of the cylinder, the nonlinear behaviors of the soil, and the limit strength condition of the soil on the dynamic responses of the large-cylinder structure are investigated with an example given. It is indicated that the above-mentioned factors have significant effects on the dynamic responses of an embedded large cylinder breakwater under breaking wave excitation.     

季风低频振荡与厄尔尼诺的发生发展

基于NCEP／NCAR逐日再分析资料，应用小波分析方法研究讨论了西太平洋、南海、阿拉伯海等近赤道季风区850hPa纬向风场低频振荡与ElNino发生发展的相关特征。研究发现，在El Nino发生前期，30－50d低频振荡会出现显著的增强，El Nino发生后，30－50d低频振荡明显减小，120－150d准定常波动加强。分析表明，近赤道季风区显著低频振荡是El Nino发生发展的一个重要前兆，低频振荡能量向甚低频段的转移和输送可能是El Nino发生的重要机理。     

分离入射波与反射波的解析方法

提出了一种新的分离入射波和反射波的解析方法（AM）。利用两点处的 波高信息，运用Hilbert变换得到波浪信号在复域内的解析表达式，不需要计算合成波高和相位差即可实现信号的分离。根据分离结果，可以精确地估计入射波与反射波的幅值以及反射系数等参数，能够获得入射波与反射波之间的相位信息，并且可方便地用于不规则波的分离。文中通过数值模拟与物理模型实验对AM法进行了检验，所得的结果与实际值非常吻合。     

珠江口河流输沙、河口沉积与粒度信息之间的联系

河口三角洲地区泥沙供应充分，是现代沉积速率较高的区域。快速沉积的泥沙包含高分辨率的环境信息。采用放射性同位素测年方法研究了珠江口伶仃洋大铲湾海域6个柱样的现代沉积速率，以2mm的间隔分析了其中2个柱样上部的粒度，并对其平均粒径和珠江流域的年输沙量进行了快速傅里叶变换，以期获取河流泥沙供应、河口沉积速率和沉积物垂向粒度变化的对应关系。结果表明，大铲湾海域的沉积速率为1～3cm／a，受动力条件和泥沙供应条件的影响显著。2个柱样的平均粒径的最显著重现周期与珠江年输沙量的周期性有较好的对应关系，并可能反映了季节的、年的和多年的沉积速率信息。对于每年沉积厚度在厘米级的环境，以毫米级的高分辨率进行粒度分析，有可能揭示出沉积物供应的季节变化和年际变化。本研究亦可为其他河口的相关工作提供借鉴。     

Damage Detection Methods for Offshore Platforms Based on Wavelet Packet Transform

1 .IntroductionInthe whole service period of the platforms ,some damage is unavoidable due to the corrosion,impact ,fatigue and so on.The damage whould cause the structures’ultimate capacity and safety de-crease .Presently,it is generally acceptedthat the detection of damage involes considerable statisticaluncertainties,thus lot of efforts is made for the damage probalility model ,for example Song and Lu(1996) usedthefuzzy-settheoryto estimatethe humanerrorsthroughthe definitionof inspection…     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

基于K-L变换的多光谱图像增强方法

为在多光谱图像增强同时保持其光谱特性,提出了基于K-L变换的多光谱图像增强方法,并在研究如何准确量化增强前后光谱保持度的基础上,提出了光谱特性保持系数的概念.实验结果表明,该方法在对多光谱图像增强的同时,能较好地保持多光谱图像的光谱特性.     

基于小波变换与滤波的DEM简化方法

针对现有3维地形模型简化方法中的不足,提出了一种基于小波变换与滤波的规则格网简化方法。同时还在大量实验的基础上,给出了一般情况下需要的变换层数,分析了滤波门限与简化效果之间的关系。这里的研究不仅为3维地形的多分辨率合理建模与精度评估提供了理论和方法,而且也为今后开展类似研究及进行建模质量控制提供了科学的依据。