A Preliminary Analysis of Relations Between Tectonic Deformation of Sedimentary Cover and Basement in Kuqa Depression

Study of seismic activity in the Kuqa area enables us to infer some possible active faults in basement from the epicentral distribution on different profiles. The relations between active faults in the basement and surface structures are analyzed and the difference between sedimentary cover and basement in their deformation characteristics and the genesis are discussed. The following conclusions have been drawn : ( 1 ) the epicentral distribution indicates that, the east Qiulitag and south and north Qiulitag deep faults in the basement correspond to the east and west Qiulitag anticlines, respectively. Moreover, deep faults also exist beneath the Yiqiklik and Yaken anticlines. It indicates that the formation of surface structures is controlled by deep structures; (2) A NE-trending strike-slip fault develops along the line from the western termination of Yiqiklik structure to Dongqiu Well 5 and a NW-trending active fault on the western side of Baicbeng. The two active faults across the tectonic strike are the main causes for tectonic segmentation of the Kuqa depression and possibly the cause for the middle segment (Kuqa-Baicheng) of the depression to be more shortened than both its eastern and western terminations; (3) The difference between the sedimentary cover and basement in their deformation characteristics depends mainly on the different properties of media between them.The lithospheric strength of the basement in the basin is fairly high, which determines the basement deformation to be mainly of brittle fracture seismic activity. While the strength of sedimentary cover is low, where there exist weak thin layers, such as coal and gyps. Under the effect of strong tectonic compression, the sedimentary rocks may undergo strong viscous or plastic flow deformation; meanwhile, an aseismic detachment may take place along the weak layers.     

裂变径迹长度测量标准化研究——锆石蚀刻标准探讨

通过不同时间蚀刻的锆石径迹长度测量,确定海南迅速冷却火山型锆石的水平封闭径迹(HCT)平均长度L＝10.93 μm,标准偏差为0.93 μm,可作为锆石长度测量的参照标准.对锆石的蚀刻标准进行了探讨,确立垂直C轴的表面径迹宽度Dpar为(1.0±0.5)μm的蚀刻标准,要求Dpar>1 μm和Dpar<1 μm的颗粒数应大致相当,以及封闭径迹宽度DHCT<1.0 μm的测量标准.     

对用沸石和砂石去除地下水中病毒和细菌有效性的野外评价

本文实验的目的是评价含氧化铁涂层的砂石和表面活性剂改进的沸石去除饮用水中病毒和细菌的有效性。微生物污染一直是受到全世界关注的严肃问题。许多国家包括美国在内的，地下水是主要的饮用水源。美国的公共饮用水消耗量的40％来源于地下水。其他国家，如丹麦，地下水占饮用水的     

Sorption Characteristics of Rare Earth Element Eu^3＋ onto Silica-Water Interfaces Studied by Fluorescence Spectroscopy

The sorption of Eu species onto nano-size silica-water interfaces was investigated using fluorescence spectroscopy for Ph ranges of 1-8.5 and an initial Eu concentration (Ceu) of 2×10-4 M. The sorption rate of Eu was initially low, but significantly increased at Ph>4. The sorption density of Eu species on a silica surface was ～1.58×10-7 mol/m2 when the dissolved Eu species were completely sorbed onto silica-water interfaces at Ph=～5.8. The sorbed Eu species at Ph<6 is aquo Eu3 , which is sorbed onto silica-water interfaces as an outer-sphere complex at Ph<5, but may be sorbed as an inner-sphere bidentate complex at 5相似文献   

合理设计岩屑规程保证正常钻进条件——金刚石钻进技术专题之一

论述了正常钻进的条件，提出了合理岩屑规程是保证正常钻进的关键和设计钻头的主要依据之一，讨论了岩屑规程与金刚石钻头唇面工作状态、孔底表面粗糙度和岩屑粒度的关系，提出了相应的建议。     

北京石花洞地区奥陶纪灰岩36Cl侵蚀速率初探

本文根据理论上灰岩中36Cl的5个来源，论述了36Cl在灰岩深度剖面上的4个分布特征，描述了36Cl的采样方法和AMS的分析技术。计算出北京石花洞地区奥陶纪（O2）灰岩的表面侵蚀速度（ε=17.40μm/a）。     

Pix4Dmapper在无人机航摄应急救灾项目中的应用研究

无人机由于其独特的航摄优势,在灾害应急处理等特殊事件中,发挥着越来越重要的作用。本文结合一次山体滑坡救灾项目,阐述了使用Pix4Dmapper软件对无人机航摄数据进行快速处理,并获取正射影像图和数字表面模型的方法,通过数据分析和评估,证明了此方法的可行性和有效性。     

自适应高程分级的城区DSM晕渲方法

在对传统的分层设色晕渲理论应用于城区DSM的可视化技术进行充分研究的基础上,提出了一种基于高程直方图的自适应高程分级方法。该方法通过高程直方图研究城区地形、地物的高程分布及变化特征,自适应建立高程带分级模型。实验表明,提出的晕渲图制作方法兼顾了地貌形态和地物特征的表达,成果色彩过渡自然,层次清晰,地形、地物区分明显,有较强的艺术性和实用价值。     

平行轮廓线自适应插值的三维表面重构算法

针对稀疏点轮廓线在三维表面重构中存在的不够光滑、匹配易出错和难以交互等问题,提出了基于轮廓线插值的三维表面重构方法,并通过实验进行验证。文章分析了三维表面重构的形式化表达方法和准则,提出了基于虚跨距解决稀疏点轮廓线三维重构的基本思想;基于同步前进算法和虚跨距,设计了自适应等比例插值的同步前进三角面镶嵌算法;针对轮廓线插值违背三角表面重构拓扑准则的规律进行了分析,提出了相应的修正算法,保证了三角网的拓扑一致性。试验结果表明:本算法所构建的三角网表面更为光滑,各个三角面的大小更为均匀,具有更好的鲁棒性和交互性,对稀疏和稠密坐标点的轮廓线均能构建出更为理想的三维表面模型。     

南京周家山下蜀黄土石英颗粒特征及其物源意义

下蜀黄土的成因和物源一直是学术界研究的热点。对南京周家山下蜀黄土的石英粒度和石英表面微结构进行分析,结果显示:粉砂粒级石英颗粒（5~50 μm）占绝对优势;<20 μm组分平均含量为42.76%,<30 μm组分平均含量为62.98%;粒度分布曲线和累积曲线总体具有颗粒偏细,呈正偏态,分选较差,峰形尖锐,双峰曲线不对称的特征;粒级-标准偏差曲线呈“双峰”分布,两个明显的标准偏差峰值分别出现在7.962 1 μm和39.905 2 μm。石英颗粒表面形态主要以次棱角状为主;表面机械结构具有丰富的蝶形坑、曲脊、贝壳状断口,部分表面出现平行节理面、V形坑;不同粒级组分表面形态和机械结构特征存在差异。分析表明,南京周家山下蜀黄土属典型风成成因堆积物,是多源区物质高度混合搬运堆积的结果。