沉积盆地中的流体包裹体：理论基础、图解与分析方法

本文主要介绍如何利用流体包裹体来获得合理的数据。首先对H2O-体系进行总结，着重介绍利用显微测温法和其他新的分析技术来确定流体的组成，并举例说明流体混合在流体包裹体研究中的应用。介绍了H2O-(气)-盐体系特别是CO2-CH4体系的图解，探讨了在低温下由于笼舍物的形成H2O-(气)-盐体系的复杂相变。重点介绍显微激光拉曼光谱仪在含甲烷水溶液流体中的应用，并根据相图详细讨论了如何确定流体的不混溶。     

安徽铜陵矿集区海底喷流沉积体系的流体包裹体微量元素对比

铜陵矿集区与铜-金(多金属)矿床有关的热液活动主要有两大体系。即与海西期海底喷流沉积有关的热液体系和与矽卡岩矿化有关的燕山期岩浆热液体系。查明这两类热液体系的流体包裹体特征对区域找矿和矿床成因研究都有实际意义。在包裹体岩相学研究基础上，应用ICP-MS技术和热爆提取方法，研究了新桥、冬瓜山、峙门口、铜官山、朝山等矿床具代表性的热液石英中流体包裹体的微量元素、稀土元素特征。结果表明，两类热液体系在流体包裹体特征上有较大的区别，在流体的微量元素和稀土元素特征方面也很不相同。海底喷流沉积体系的热液石英中流体包裹体与岩浆热液体系的相比。稀土总量较高，LREE／HREE比值较大，δEu不明显。且Mo／(W Sn)比值较高，反映流体中成矿物质的深源特征；Ga／T1、Rb／Cs大。Zr／Hf低，也不同于岩浆热液体系。     

南秦岭十里坪锑矿床成矿时代及成因的初步研究

十里坪锑矿床受赵川陆缘隆_滑构造的主滑脱拆离带的控制。矿体呈脉状赋存于韧_脆性主滑脱带上部的脆性次级断层_节理中,矿石类型主要为萤石石英辉锑矿型。围岩为太古宙_元古宙变质岩系,围岩蚀变弱。成矿流体属H2O_CO2_NaCl体系,流体包裹体盐度w(NaCleq)为3.6%～11.3%,均一温度为109～232℃,形成压力大致为800×105Pa。硫、铅同位素研究表明,矿质主要来源于变火山岩围岩;氢、氧同位素显示,成矿流体以大气降水为主,初步将该矿床定为变质岩源就地式大气降水热液矿床。矿石中萤石Sm_Nd等时线年龄为(392±24)Ma,与南秦岭北部晚古生代拗陷区热水喷流_沉积成矿时代相一致,它们都形成于秦岭微板块泥盆纪非造山裂解阶段。     

卡林型金矿不可见金与超压流体（Overpressured fluid）关系探讨——以贵州贞丰水银洞金矿为例

贵州水银洞(岩上)微细浸染型金矿产于贵州省贞丰县境内，是目前我国第一个成功地从原生硫化物矿石中商业性生产出金的微细浸染型金矿矿山。该矿床的矿体产于灰家堡背斜东段核部的上二叠统龙潭组地层中及其与中二叠统茅口组灰岩的接触带，呈几层基本平行排布的似层状和透镜状产出。金矿化主要赋存于硅化白云石化生物碎屑灰岩和泥灰岩(85％)和强硅化角砾状粘土岩(14％)中，     

Pressure State in Deep Crust and Formation Depth of UHP Metamorphic Rocks

INTRODUCTIONSincethediscoveryofeclogiteswithcoesiteanddia mondinclusionsrelatedtothecontinent continentcollision orogenyenvironment,theultrahigh pressuremetamorphism(UHPM )intheDabie Suluhasarousedgreatinterestinmanygeologists (Liouetal .,1994 ;Xuetal.,1992 ) .Experimentalstudieshaveprovedthatsuchmineralsasdia mond ,coesiteandomphaciteoccurredat 2 - 5GPa (andatthecorrespondingtemperatures) (Stevenetal.,1982 ;MirwaldandMasonne ,1980 ) .However,itdoesnotmeanthatthemetamorphicrockscanbe…     

鲁东南岚山头超高压变质岩流体包裹体特征与板片折返史

鲁东南岚山头含柯石英榴辉岩主要产于花岗质片麻岩内,是苏鲁超高压变质带主要榴辉岩体密集分布区之一。流体包裹体研究表明,榴辉岩矿物及细脉石英中捕获有四种类型包裹体:在超高压-高压榴辉岩相条件下捕获的 N_2±CO_2包裹体;在高压榴辉宕重结晶阶段被捕获的 CO_2-H_2O 包裹体和含子矿物高盐度 H_2O 溶液包裹体:在超高压岩石折返过程中的最晚(角闪岩相退变质甚至更晚)阶段捕获的低盐度 H_2O 溶液包裹体。利用榴辉岩矿物及脉体石英中捕获的流体包裹体相互期次关系,可以对本区超高压变质作用板片折返过程中的流体演化史进行重建。     

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.     

金龙——丘岭金矿床成矿流体的储运规律及区域找金方向

金龙山——丘岭金矿区含金矿源为层上泥盆统南羊山组和下石炭统袁家沟组。组成含金矿源层岩石为高频互层的细碎屑岩-碳酸盐岩，其中细砂岩、粉砂岩、碳酸盐岩含成矿流体物性较好．页岩、板岩含成矿流体物性较差，构成屏蔽层。金鸡岭Ⅰ级复式向斜控制着金、砷、锑等异常范围；松枣Ⅱ级复式背斜控制着金的矿化带；金龙山-丘岭金矿Ⅲ级背斜控制着金的矿（化）体；镇安——板岩镇断裂的次级断裂是金矿化体的容矿有利位置。在成矿过程中，构造变形与成矿流体的形成、运移及储集密切相关。其规律是：①原生构造导致成矿流体的初次聚集。②第一期构造变形导致成矿流体的聚集。③第二期构造变形导致成矿流体运移及金矿床形成。此期变形是金的主要成矿期。④第三期构造变形使成矿流体进一步聚集和金矿体的富集。⑤第四期构造变形是石英方解石脉的形成时期。总结出矿床形成模式。据此提出了在4种不同的构造部位找金的方向。