Temporal and dimensional distribution of sulfate-reducing bacteria （SRB） groups and quantity in the sediments of Lake Erhai

The purpose of the thesis is to analyze the temporal and dimensional distribution of sulfate-reducing bacteria （SRB） groups and quantity in Lake Erhai. In April and September 2005, two sediment cores were collected from Lake Erhai. SRB groups were analyzed by PCR with six-groups primers designed according to the specific 16SrDNA sequence. FISH （fluorescence in-situ hybridization） was established with the oligonucleotide probe （SRB385） and utilized to analyze SRB quantity in the sediments. The results showed that in the sediments of Lake Erhai four SRB groups were detected except Desulfobacterium and Desulfobacter, meanwhile Desulfovibrio-Desulfomicrobium were detected only in autumn; different SRB groups had different temporal and dimensional distribution, and each group in autumn is distributed more widely than in spring; FISH used to count SRB in the sediments of fresh lake was set up successfully; the analysis of correlation between the sediment＇s depth and SRB quantity had statistical meaning （P〈0.05） . The result showed that SRB quantity showed a decreasing trend with increasing depth. Through the analysis of randomized block designed analysis of variance, the difference in SRB quantity between spring and autumn also had statistical meaning （P〈0.001）, which revealed SRB quantity in autumn was larger than in spring; the result of FISH showed that there were some SRB in the deeper sediments in which no above-mentioned six SRB groups were detected by PCR. SRB groups in the sediments of Lake Erhai were rich, and the quantities of SRB groups in autumn were larger than in spring; possibly there were uncultivable SRB groups in the sediments of Lake Erhai.     

Association between multi-level inorganic arsenic exposure from drinking water and skin lesions in Inner Mongolia, China

Arsenic is one of the most important single-substance toxicants in the environment. In Inner Mongolia of China, 300000 residents are believed to drink water containing 〉50 μg/L. Skin lesions have been known as the most common consequences resulting from chronic exposure to arsenic. To clarify the prevalence of arsenic-induced skin lesions, it is important to assess the impact of this problem on the target population, and to make future planning. We evaluated the association between multi-level inorganic arsenic exposure from drinking water and skin lesions in an arsenic-affected area in Inner Mongolia, China. 109 and 32 subjects fi＇om high-level arsenic-affected （〉5 μg/L） village and low-level （≤50 μg/L） village were recruited and had detailed physical examination with special emphasis on arsenic-related skin lesions. Arsenic exposure was measured for each participant with As concentration of primary well and the duration of using the well was recorded. Arsenic-induced skin lesions including keratosis, pigmentation, and/or leucomelanosis were diagnosed in 56 and 3 subjects in the two villages, respectively. Logistic regression was conducted to calculate prevalence-odd ratios of skin lesions by levels of arsenic exposure with adjustment of sex, age group, smoking and duration of exposure. A consistent dose-response relationship between arsenic exposure level and skin lesion risk was observed.     

Associations and mobility of uranium in soils near a depleted uranium （DU） weapons testing site, SW Scotland

Natural uranium has three isotopes, ^238U, ^235U and ^234U, with natural abundances of 99.27 atom %, 0.72% and 0.0055%, respectively. Only ^235U is fissile and the production of nuclear fuel and nuclear weapons involves enrichment of uranium in ^235U. This process also results in separation of ^234U from ^238U, leaving depleted uranium （DU）, with typical ^234U/^238U and ^235U/^238U activity ratios of about 0.19 and 0.013, respectively, as a waste product. The high density, high melting and boiling points and chemical stability of uranium and the availability of DU in relatively pure form mean that DU has many uses, including armour-piercing munitions. Such munitions have been developed in the UK since the 1960s and testing has been carried out by the Ministry of Defence （MoD） at firing ranges such as Dundrennan, SW Scotland and Eskmeals, NW England. The firing of DU munitions can result in the dispersion of DU and its combustion products （oxides） as aerosols or as larger fragments, with the potential for human exposure either directly at the site of detonation or via post-depositional migration in the environment. The aim of this work was to investigate the potential environmental mobility of DU by characterizing the associations of U in soil porewaters with increasing distance from a firing site. To this end, several soil cores located down-wind of the firing site at Dundrennan, near Kirkcudbright, SW Scotland, were collected in May 2006. These were sectioned on-site into 1- or 2-cm depth intervals and porewaters were isolated by centfifugation （10 minutes; 8873 g） on return to the laboratory. Following filtration through 0.2-micron cellulose nitrate filters, the porewaters were analyzed by ICP-QMS （U concentration） and ICP-OES （Fe, Al, Ca, Mg, Mn concentrations）. Sub-samples were also subjected to centrifugal ultrafiltration （100, 30, and 3 kD） and to gel electrophoretic fractionation （agarose; 0.045 M Tris-borate; 20 mA, 30 minutes）. Results showed that U was present at up to 4 μg/L in the soil porewater and that the associations of U varied with sample location and soil depth.     

XANES analysis of the mechanisms of arsenic removal in biological iron and manganese treatment unit

Biological iron and manganese removal utilizing indigenous iron and manganese oxidizing bacteria （IRB hereafter） in groundwater can also be applied to arsenic removal according to our pilot-scale test. The arsenic removal probably occurred through sorption and complexation of arsenic to iron and manganese oxides formed by enzymic action of IRB. We investigated the chemical properties of iron and manganese oxides in IRB floc and the valence state of arsenic sorbed to the floc to clarify the mechanisms of the arsenic [especially As （Ⅲ）] removal. The floc samples were collected from two drinking water plants using IRB （Jyoyo and Yamatokoriyama, Japan）, and our pilot - scale test site where arsenic and iron removal using IRB is under way （Mukoh, Japan）. The Jyoyo and Yamatokoriyama IRB floc samples were subjected to As （Ⅲ） and As（Ⅴ） sorption experiments. The elemental composition of the floc samples was measured. XANES spectra were collected on As, Fe and Mn K-edges at synchrotron radiation facility Spring 8 （Hyogo, Japan）. FT-IR and the X-ray diffraction spectra of the samples were also obtained. The IRB floc contained ca. 35 % Fe, 0.3%-3.5% Mn and 2%-6% P. The samples were highly amorphous and contained ferrihidrites and hydrated iron phosphate. According to XANES analyses of IRB, As associated with IRB was in ＋5 valence state when As （Ⅲ） （or As （Ⅴ）） was added in laboratory sorption test, Fe in ＋3 valence state, and Mn a mixture of＋3 and ＋4 valence states. Small shift was observed in the XANES spectra of IRB on As K-edge as the equilibration time of the sorption experiment was increased. Gradual oxidation of a small amount of As （Ⅲ） associated with IRB or change in arsenic binding with sorption site were the probable mechanism.     

Possibility of degradation of phenylarsonic acid in the presence of ferrihydrite

Although inorganic species are predominant in natural systems, but there are many kinds of organoarsenic species such as methylated and phenylated arsenic compounds. Phenylarsonic acid （PA） is a degradation product of organoarsenics used for chemical warfare agents, which has been detected in well water at the disposal site of the agents in Japan. There are few reports studying behavior of PA in soil. In this study, PA was adsorbed onto ferrihydrite and its chemical forms were determined using high performance liquid chromatography connected to inductivity-coupled plasma mass spectrometry （HPLC-ICP-MS）. 100 mg/kg of PA was mixed with 0.03 g of 2-line ferrihydrite. For each suspension, pH was adjusted by HNO3 or NaOH. Each sample was incubated for more than 19 hours and the final pH was measured. After filtration, the chemical form of arsenic in the filtrate was measured using HPLC-ICP-MS. In addition, ferrihydrite separated by filtration was dissolved by 3 ml of 0.5 M HCI and the arsenic species in the solution was detected by HPLC-ICP-MS （column： Tosoh TSKgel SuperlC-AP, eluent： 0.01 M HNO3）. It was verified that PA is not degraded by heating in 0.5 M HCl solution. At pH 3.1, any arsenic compounds were not detected from the solution, because almost all arsenic species were adsorbed onto ferrihydrite at lower pH. At pH= 12, however, 7%-10% of inorganic arsenic was detected in the solution. In solid phase, there are some problems to determine the precise ratio of inorganic and organic species. When the solution includes Fe ion at 0.01 M level, the retention time of arsenic species drifted compared to those in standard solution, which makes it difficult to determine precisely the arsenic species adsorbed on ferrihydrite. Therefore, more study is needed to determine the ratio of inorganic and organic species in the system.     

Synergistic effect of combining sulfate reducing bacteria and zerovalent iron permeable reactive barriers on the treatment of groundwater rich in uranium, sulfate and heavy metals

Uranium processing and mining activities that generate many contaminants, such as high concentrations of U （VI）, sulfate and heavy metals （Zn, Cu, Ni, etc）, may pose a serious threat to the groundwater resources. In recent years, considerable research has been conducted respectively on two kinds of permeable reactive barriers （PRB）, including zerovalent iron （ZVI） and sulfate reducing bacteria （SRB）, for in-situ removal of these pollutants from groundwater. However, little investigation has been carried out on the potential benefits of bioaugmenting ZVI barriers to enhance the elimination of the pollutants by combining ZVI with SRB systems. The main goal of this study was to conduct batch and column experiments to determine whether the combination of SRB and ZVI can function synergistically and accelerate the rate of pollutant removal. The results of anaerobic batch experiments demonstrated that although the integrated ZVI/PRB system itself has no ability to reduce and remove sulfate directly, SRB can utilize hydrogen gas produced during the slow process of ZVI corrosion as an electron donor to raise biomass yields significantly and accelerate reductive sulfate removal. In particular, ferrous cations produced as the byproduct of ZVI corrosion process reacted with hydrogen sulfide from sulfate reduction and formed iron-bearing sulfide precipitates, which can stimulate the growth of SRB and promote sulfate removal activity by eliminating the biotoxicity of hydrogen sulfide. It was also shown that secondary mineral products （pyrite/ferrous sulfide） formed as a consequence of microbial sulfate reduction and ZVI corrosion process can enhance the microbial precipitation of soluble U （VI） as insoluble uraninite（uranium dioxide）.     

Effects of low molecular weight organic acids on sorption and desorption behavior of p-chlorophenol by yellow earth

Low molecular weight organic acids （LMWOAs） are important components of root exudates. They play an important role in immobilizing and remobilizing contaminants in rhizospheric soil. Effects of four LMWOAs on the sorption and desorption behavior of p-chlorophenol by yellow earth was studied in batch mode. The results showed that the previous application of LMWOAs to enhanced adsorption capacity of p-chlorophenol of the soil in the order of maleic acid〉malic acid〉oxalic acid〉citric acid. However, when LMWOAs were applied to soil where p-chlorophenol had been previously adsorbed, substantial p-chlorophenol was desorbed from soil by oxalic acid, whereas citric acid, malic acid and maleic acid didn＇t desorb as much p-chlorophenol from soil as deionized water.     

The concentration and distribution of different mercury species in the water columns and sediment of Aha Lake

In order to find out whether Aha Lake was polluted by the acid mining waste water or not, the concentration and distribution of different mercuryspecies in the water columns and sediment profile collected from Aha Lake were investigated. It was found that discernible seasonal variation of different mercury species in water body were obtained in the Aha Reservoir. With regards to the whole sampling periods, the concentrations of HgP in the Aha Reservoir water body were evidently correlated to the concentrations of total mercury, showing that total mercury was mostly associated with particle mercury. The concentrations of methylmercury in water body were also evidently correlated to the concentrations of dissolved mercury. The dissolved mercury evidently affects the distribution and transportation of methylmercury. However, there is no correlation between methylmercury and total mercury. The dissolved mercury, reactive mercury, dissolved methylmercury levels in the water body of high flow period were much higher than those in low flow period. The distribution, speciation and levels of mercury within the Aha Reservoir water body were governed by several factors, such as the output of river, the release of sediment . Discernible seasonal variation of total mercury and methylmercury in porewater was described during the sampling periods, with the concentrations in high flow period generally higher than those in low flow period. The methylmercury in pore water column was evidently correlated to that of the sediment. The results indicated that highly elevated MeHgD concentrations in the porewater were produced at the depths from 2 to 5 cm in the sediment profile, and decreased sharply with depth. A positive correlation has been found between MeHgD formation and sulfate reducing bacterial activity. These highly elevated concentrations of MeHgD at the intersurface between waters and sediments suggest a favorable methylation condition. Moreover,     

High resolution profiles of trace metals in pore waters of marine and riverine sediments assessed by DET and DGT

In polluted aquatic systems, toxic metals are often accumulated in bottom sediments. They are, however, not necessarily stored definitively because diagenetic processs can modify redox, pH and even the amount of complexing ligands, releasing the trace metals back into the pore waters and the water column. Especially the labile metal fraction in the pore waters is important since this is the bioavailable fraction determining the bio-toxicity of the sediments. The goal of our study was therefore to assess, with novel sampling techniques, this bioavailable metal fraction in the pore waters as well as the flux towards the overlying water column. High-resolution profiles of trace metals in pore waters of marine and riverine sediments were assessed by DET （diffusive equilibrium in thin films） and DGT （diffusive gradients in thin films） gel techniques. The DET technique uses a diffusive gel layer that equilibrates with the aquatic system and with this technique the concentrations of total dissolved trace metals are obtained directly. The DGT technique uses an acrylamide diffusive gel backed by a resin gel （Chelex） which binds trace metals. With the DGT technique only labile species of selected metals can be captured. According to the redox potential measurements, the marine sediments were suboxic （200 mV to -220 mV versus Ag/AgCl electrode）, while the riverine sediments were completely anoxic （-160 mV to -220 mV versus Ag/AgCl electrode）. This redox potential was apparently controlling the trace metals species in the pore waters： for example a strong correlation between Mn and Co was found in the riverine sediments （for DET and DGT sampling）, while in the marine sediments trace metals presented various behaviors.