Dynamic modeling and vibration suppression for an offshore wind turbine with a tuned mass damper in floating platform

The worldwide demand for renewable energy is increasing rapidly. Wind energy appears as a good solution to copy with the energy shortage situation. In recent years, offshore wind energy has become an attractive option due to the increasing development of the multitudinous offshore wind turbines. Because of the unstable vibration for the barge-type offshore wind turbine in various maritime conditions, an ameliorative method incorporating a tuned mass damper (TMD) in offshore wind turbine platform is proposed to demonstrate the improvement of the structural dynamic performance in this investigation. The Lagrange's equations are applied to establish a limited degree-of-freedom (DOF) mathematical model for the barge-type offshore wind turbine. The objective function is defined as the suppression rate of the standard deviation for the tower top deflection due to the fact that the tower top deflection is essential to the tower bottom fatigue loads, then frequency tuning method and genetic algorithm (GA) are employed respectively to obtain the globally optimum TMD design parameters using this objective function. Numerical simulations based on FAST have been carried out in typical load cases in order to evaluate the effect of the passive control system. The need to prevent the platform mass increasing obviously has become apparent due to the installation of a heavy TMD in the barge-type platform. In this case, partial ballast is substituted for the equal mass of the tuned mass damper, and then the vibration mitigation is simulated in five typical load cases. The results show that the passive control can improve the dynamic responses of the barge-type wind turbine by placing a TMD in the floating platform. Through replacing partial ballast with a uniform mass of the tuned mass damper, a significant reduction of the dynamic response is also observed in simulation results for the barge-type floating structure.     

Improving the prediction of extreme FPSO hawser tension,using another highly correlated hawser tension with a longer time record

The floating production storage and offloading unit (FPSO) is an offshore vessel that produces and stores crude oil prior to tanker transport. Robust prediction of extreme hawser tensions during the FPSO offloading operation is an important safety concern. Excessive hawser tension may occur during certain sea conditions, posing an operational risk. In this paper, the finite element method (FEM) software ANSYS AQWA has been employed to analyze vessel response due to hydrodynamic wave loads, acting on a specific FPSO vessel under actual sea conditions.In some practical situations, it would be useful to improve the accuracy of some statistical predictions based on a certain stochastic random process, given another synchronous highly correlated stochastic process that has been measured for a longer time, than the process of interest. In this paper, the issue of improving extreme value prediction has been addressed. In other words, an efficient transfer of information is necessary between two synchronous, highly correlated stochastic processes. Two such highly correlated FPSO hawser tension processes were simulated in order to test the efficiency of the proposed technique.     

Obtaining the distribution of quiescent periods directly from the power spectral densities of Sea waves

There is a growing practical interest in the ability to increase the sea states at which marine operations can be safely undertaken by exploiting the quiescent periods that are well known to exist under a wide range of sea conditions. While the actual prediction of quiescent periods at sea for the control of operations is a deterministic process, the long term planning of future maritime tasks that rely on these quiescent periods is a statistical process involving the anticipated quiescence properties of the forecasted sea conditions in the geographical region of interest. It is in principle possible to obtain such data in tabular form either large scale simulation or from field data. However, such simulations are computationally intensive and libraries of appropriate field data are not common. Thus, it is clearly attractive to develop techniques that exploit standard wave spectral models for describing the quiescence statistics directly from such spectra. The present study focuses upon such techniques and is a first step towards the production of a computationally low-cost quiescence prediction tool and compares its efficacy against simulations. Two significant properties emerge for a large class of wave spectral models that encompasses the ubiquitous Neumann and Pierson Moskowitz or Bretschneider forms. Firstly, the auto-correlation function of the wave profile that are required to produce the quiescence property can be obtained analytically in terms of standard special functions. This considerably reduces the computational cost making desktop computer-based planning tools a reality. Secondly, for each class of these parametric spectra, the probability of a given number of consecutive wave heights (normalised to the significant wave heights) less than some critical value is in fact independent of absolute wave height. Thus, for a broad class of practically interesting wave spectra all that is required to obtain the statistical distribution of the quiescent periods is simple rescaling.     

An efficient and robust approach to predict ship self-propulsion coefficients

Achieving a reliable and accurate numerical prediction of the self-propulsion performance of a ship is still an open problem that poses some relevant issues. Several CFD methods, ranging from boundary element methods (BEM) to higher-fidelity viscous Reynolds averaged Navier–Stokes (RANS) based solvers, can be used to accurately analyze the separate problems, i.e. the open water propeller and the hull calm water resistance. However, when the fully-coupled self-propulsion problem is considered, i.e. the hull advancing at uniform speed propelled by its own propulsion system, several complexities rise up. Typical flow simplifications adopted to speed-up the simulations of the single analysis (hull and propeller separately) lose their validity requiring a more complex solver to tackle the fully-coupled problem. The complexity rises up further when considering a maneuver condition. This aspect increases the computational burden and, consequently, the required time which becomes prohibitive in a preliminary ship design stage.The majority of the simplified methods proposed in literature to include propeller effects, without directly solve the propeller flow, in a high-fidelity viscous solver are not able to provide all the commonly required self-propulsion coefficients. In this work, a new method to enrich the results from a body force based approach is proposed and investigated, with the aim to reduce as much as possible the computational burden without losing any useful result. This procedure is tested for validation on the KCS hull form in self-propulsion and maneuver conditions.     

长江口盐度梯度下不同形态碳的分布、来源与混合行为

河口碳的生物地球化学过程是全球碳循环的重要组成。通过测定溶解无机碳（DIC）及其稳定同位素丰度（δ13C_DIC）,溶解有机碳（DOC）,有色溶解有机物（CDOM）,颗粒有机碳（POC）及其稳定同位素丰度（δ13C_POC）与元素比值（N/C）及相关指标,研究了2014年7月长江口盐度梯度下不同形态碳的分布、来源和混合行为。结果表明,DIC浓度、DOC浓度、POC含量分别为1 583.2~1 739.6 μmol/L,128.4~369.4 μmol/L和51.2~530.8 μmol/L,这些不同形态碳及CDOM的荧光组分的分布模式相似,均是从口内到口外,整体呈现先增大后减小的趋势,并与盐度呈现非保守混合行为。添加作用主要发生在在口门处最大浑浊带附近。与含量相反,从口内到口外,δ13C_DIC和δ13C_POC均呈现逐渐减小再增大的趋势,在口门附近达到最低值,分别为-9.7‰和-26.7‰。在口门附近不同形态碳含量上升及δ13C_DIC、δ13C_POC的降低可能主要与沉积物再悬浮及微生物作用有关。基于蒙特卡洛模拟的三端元混合模型的结果显示,河口内外POC来源变化明显,口内POC以陆源有机碳贡献为主,平均为62.3%,口外海源贡献逐渐增加。CDOM相关参数结果表明长江口CDOM主要来自陆源输入,海源及人类活动等也对其产生影响。     

2015年台风“彩虹”过境后下山冷急流引起的南海北部海域异常海面降温

This study deals with a unusual cooling event after Typhoon Mujigea passed over the northern South China Sea(SCS) in October 2015. We analyze the satellite sea surface temperature(SST) time series from October 3 to 18,2015 and find that the cooling process in the coastal ocean had two different stages. The first stage occurred immediately after typhoon passage on October 3, and reached a maximum SST drop of –2℃ on October 7 as the usual cold wake after typhoon. The second stage or the unusual extended cooling event occurred after 7d of the typhoon passage, and lasted for 5d from October 10 to 15. The maximum SST cooling was –4℃ and occurred after 12d of typhoon passage. The mechanism analysis results indicate that after landing and moving northwestward to the Yunnan-Guizhou Plateau(YGP), Typhoon Mujigea(2015) met the westerly wind front on October 5. The lowpressure and positive-vorticity disturbances to the front triggered meridional air flow and low-pressure trough,thus induced a katabatic cold jet downward from the Qinghai-Tibet Plateau(QTP) passing through the YGP to the northwestern SCS. The second cooling reached the maximum SST drop 4d later after the maximum air temperature drop of –9℃ on October 11. The simultaneous air temperature and SST observations at three coastal stations reveal that it is this katabatic cold jet intrusion to lead the unusual SST cooling event.     

南海东北部陆架边缘第四纪高分辨率层序地层和沉积体系演化及其控制因素

The northeastern shelf margin of the South China Sea(SCS) is characterized by the development of large scale foresets complexes since Quaternary. Based on integral analysis of the seismic, well logging and paleontological data, successions since ～3.0 Ma can be defined as one composite sequence, consist of a set of regional transgressive to regressive sequences. They can be further divided into six 3 rd order sequences(SQ0–SQ5) based on the Exxon sequence stratigraphic model. Since ～1.6 Ma, five sets of deltaic systems characterized by development of wedge-shaped foresets complexes or clinoforms had been identified. High-resolution seismic data and the thick foresets allowed further divided of sub-depositional sequences(4 th order) of regression to transgression, which is basically consistent with published stacked benthic foram O-isotope records. Depositional systems identified in the study area include deltaic deposits(inner-shelf deltas and shelf-edge deltas), incised valleys, and slope slumping massive deposits. Since ～1.6 Ma, clinoforms prograded from the southern Panyu Lower Uplift toward the northern Baiyun Depression, shelf slope break migrated seaward, whereas the shelf edge of SQ0 migrated landward. The development of incised valleys in the continental shelf increased upward,especially intensive on the SB3 and SB2. The slumping massive deposits increased abruptly since SB2, which corresponds to the development of incised valleys. The evolution of depositional systems of continental slope mainly controlled by the combined influence of sea level changes, tectonic movements, sediment supply and climate changes. Since ～3.0 Ma, relative sea level of the northern SCS had been experienced transgression(～3.0 Ma BP) to regression(～1.6 Ma BP). The regional regression and maximum transgressions of the composite sequences were apparently enhanced by uplift or subsidence related to tectono-thermal events. In addition,climatic variations including monsoon intensification and the mid-Pleistocene transition may have enhanced sediment supply by increasing erosion rate and have an indispensable influence on the development of the incised valleys and 5 sets of deltaic systems since ～1.6 Ma.     

我国瓯江口和珠江口凤鲚洄游模式和生境利用研究

Habitat use of the tapertail anchovy(Coilia mystus Linnaeus, 1758) from the Oujiang River Estuary and the Zhujiang(Pearl) River Estuary was studied by examining the environmental signatures of Sr and Ca in otoliths using electron probe microanalysis. Individuals from the Oujiang River had higher and varied Sr:Ca ratios(expressed as(Sr:Ca)×1 000, 3.83–13.0 average) in the otolith core regions, suggesting that they were born in brackish or sea waters, and that a freshwater habitat might not be necessary for egg hatching and larval growth.While, individuals from the Zhujiang River had lower Sr:Ca ratios(0.39–2.51 average) in the core regions,suggesting a freshwater origin. After hatching, anchovies from the Zhujiang River migrate downstream to the river estuary close to brackish water. Our results demonstrated varied habitat use for spawning during stages of early life history between the two populations, and suggested that such variations are promoting diversity of life history strategies of this species.     

浙江省三疣梭子蟹产量波动及潜在影响因素分析

依据2000—2015年浙江省三疣梭子蟹(Portunustrituberculatus)渔获量的数据,以及影响渔获量的因素(管理类因素、环境类因素和营养关系类因素等共11个因子),使用广义加性模型(GAM)对各类因素对三疣梭子蟹渔获量的影响进行了分析。结果显示,赤潮面积、捕捞努力量和放流数量对三疣梭子蟹渔获量影响显著(P0.01)。3个因子的累积解释比率达98.3%,其中,赤潮的解释比率最大,达到47.2%,捕捞努力量的解释比率为37.8%,放流数量的解释比率为13.3%。三疣梭子蟹渔获量随着赤潮面积增加有所减少,随着捕捞努力量的加大有迅速增加的趋势,与放流尾数呈现正相关趋势。三疣梭子蟹渔获量的波动受诸多因素的影响。今后需开展更深入的研究,找到可能影响三疣梭子蟹渔获量的其他关键因素。     

LED光色对欧洲舌齿鲈幼鱼抗氧化能力和消化能力的影响

作者利用循环水养殖实验系统,研究了红、绿、白、黄、蓝5种光色对欧洲舌齿鲈(Dicentrarchus labrax)幼鱼抗氧化能力和消化能力的影响。结果表明,红光组的欧洲舌齿鲈幼鱼超氧化物歧化酶(SOD)活力显著高于其他光色组(P0.05),而绿、白、黄和蓝光色组的SOD活力没有显著性差异;红光组的还原型谷胱甘肽(GSH)含量显著高于其他光色组(P0.05),绿、白光组与黄、蓝光组的GSH含量之间有显著性差异(P0.05);红光组过氧化氢酶(CAT)活力显著高于其他光色组(P0.05),白光组的CAT活力显著低于其他光色组(P0.05)。黄光组的胃蛋白酶活力显著高于红、绿、白光组(P0.05),绿光组的胃蛋白酶活力显著低于其他光色组(P0.05);红、绿、蓝光组的淀粉酶活力要显著高于白、黄光组(P0.05),红、绿、蓝光组的淀粉酶活力没有显著性差异,黄、白光组的淀粉酶活力没有显著性差异;白光组纤维素酶活力显著高于其他光色组(P0.05),绿光组的纤维素酶活力显著高于红、蓝光组(P0.05),黄光组的纤维素酶活力和绿、红、蓝光组没有显著性差异。因此,欧洲舌齿鲈在红光下养殖,其体内的抗氧化能力强,能有效应对氧化应激,而在黄光或红光下养殖其消化能力更强。