装载GPCTD传感器的海翼水下滑翔机观测数据实时质量控制

Profiles observed by Sea-Wing underwater gliders are widely applied in scientific research. However, the quality control(QC) of these data has received little attention. The mismatch between the temperature probe and conductivity cell response times generates erroneous salinities, especially across a strong thermocline. A sensor drift may occur owing to biofouling and biocide leakage into the conductivity cell when a glider has operated for several months. It is therefore critical to design a mature real-time QC procedure and develop a toolbox for the QC of Sea-Wing glider data. On the basis of temperature and salinity profiles observed by several Sea-Wing gliders each installed with a Sea-Bird Glider Payload CTD sensor, a real-time QC method including a thermal lag correction, Argo-equivalent real-time QC tests, and a simple post-processing procedure is proposed. The method can also be adopted for Petrel gliders.     

用褶积滤波处理井水位对固体潮响应的滞后

本文给出了一种用褶积滤波处理井水位对固体潮响应滞后的新方法。鲁07井水位观测资料用这种方法处理比一般回归方法的平均中误差少4.6mm。文中讨论了褶积滤波积分区间长度与水井含水层渗透系数的关系及褶积滤波比别尔采夫滤波的优越性。     

Are catch-up reefs an artefact of coring?

Drill cores through modern coral reefs commonly show a time lag in reef initiation followed by a phase of rapid accretion to sea level from submerged foundations – the so-called ‘catch-up response’. But because of the difficulty of drilling in these environments, core distribution is usually restricted to accessible areas that may not fully represent reef history, especially if the reef initiated in patches or developed with a prograde or retrograde geometry. As a consequence, core data have the potential to give a misleading impression of reef development, particularly with respect to the timing of initiation and response to sea-level rise. Here, we use computer models to simulate keep-up reef development and, from them, quantify variations in the timing of reef initiation and accretion rate using mock cores taken through the completed simulations. The results demonstrate that cores consistently underestimate the timing of reef initiation and overestimate the reef accretion rate so that, statistically, a core through a keep-up reef will most likely produce a catch-up pattern – an initiation lag followed by a phase of rapid accretion to sea level. This implies that catch-up signatures may be an artefact of coring and that keep-up reefs are significantly more common than previous core studies claim.     

确定精密重力仪相位滞后方法的研究

从系统辨识的原理出发,给出了确定精密重力仪相位滞后的一种方法,即记录精密重力仪在阶跃信号作用下的输出数据,利用这些数据对仪器的传递函数进行辨识,从而确定重力仪对各潮汐波产生的相位滞后角度.用这种方法对ET-21地潮重力仪进行了相位滞后的确定,并给出这台仪器对15个主要潮汐波的相位滞后角度.     

Suspended sediment transport along an idealised tidal embayment: settling lag, residual transport and the interpretation of tidal signals

We present semi-analytical solutions for suspended sediment concentration (SSC) and residual sediment transport in a simple mathematical model of a short tidal embayment. These solutions allow us to investigate in some detail the characteristic tidal and semi-tidal variation of SSC and the processes leading to residual sediment transport, including settling and scour lags, the roles of ‘local’ and ‘advective’ contributions, and the presence of internally or externally generated overtides. By interpreting the transport mechanisms in terms of the classic conceptual models of settling lag we clarify how these models may be expressed in mathematical terms. Our results suggest that settling lag is usually a more important process than scour lag, and that a local model which neglects advection may predict the direction of net sediment transport incorrectly. Finally, we discuss our results in the context of other transport processes and morphodynamic feedback.     

SWCWARMS模式小时降水量时间滞后集合预报研究

基于SWCWARMS模式9km×9km分辨率逐小时降水预报,通过时间滞后集合预报方法构建多个集合成员,使用SAL评分值计算相应集合成员的权重系数,进行不等权集合平均,从而得到新的逐小时降水预报。利用SAL、TS和BIAS检验方法对四川省2019年8月的逐小时降水量时间滞后集合预报及相应的SWCWARMS模式最新时次预报进行对比分析,结果表明:(1)时间滞后集合预报SAL检验的L值和A值都较模式预报更接近于0,较好地改善了降水位置和强度的整体预报水平;(2)时间滞后集合预报对逐小时降水晴雨TS评分提升明显,评分提高百分率在10%左右,有效地减小了模式在晴雨方面的空报;(3)临近预报时效,时间滞后集合预报方法对于大量级降水预报也有较好的订正效果。     

黄土高原半干旱区异常能量闭合率特征分析

以兰州大学半干旱气候与环境观测站（简称SACOL站）4 a的陆面通量数据为基础,利用普通最小二乘法（OLS）和能量平衡比率（EBR）方法,对能量平衡的异常闭合特征及其与相对垂直湍强（RIw）的关系进行了研究,并进行了能量滞后分析。结果表明,能量过闭合和负闭合现象分别主要发生在白天和夜间,大小遵从正态分布;较大异常闭合产生的原因主要是日出日落时净辐射与地表热通量接近以及降水影响造成湍流通量出现异常大值。一般来说,垂直湍流运动越强,异常闭合越少,闭合度越向1收敛,反之亦然。强湍流或极弱湍流都不利于产生异常闭合,过闭合、负闭合的最适相对垂直湍强RIw约为0.11、0.14。另外,能量支出项的相对滞后也是造成包括负闭合在内的异常闭合的原因之一。剔除湍强较弱的点或将地表热通量G0、感热H、潜热LE相位相对净辐射Rn提前30 min后,异常闭合所占比重减少;月平均EBR法过闭合度降低,OLS法闭合度提高。     

中国东部植被NDVI对气温和降水的时空响应(英文)

Temporal and spatial response characteristics of vegetation NDVI to the variation of temperature and precipitation in the whole year,spring,summer and autumn was analyzed from April 1998 to March 2008 based on the SPOT VGT-NDVI data and daily temperature and precipitation data from 205 meteorological stations in eastern China.The results indicate that as a whole,the response of vegetation NDVI to the variation of temperature is more pronounced than that of precipitation in eastern China.Vegetation NDVI maxi...     

基于多纹理和支持向量机的ZY-102C星HR数据分类

基于国产资源一号02C星高分辨率(high resolution,HR)影像,提取了基于变差函数、灰度共生矩阵和梯度的多纹理特征,结合光谱信息构建了基于支持向量机(support vector machine,SVM)的多源信息复合模型的图像分类方法,并与传统最大似然法和决策树法的分类结果进行了比较。研究表明,变差函数纹理和梯度纹理参与的多源复合数据有效提高了图像的分类精度,总分类精度由85.14%提高到87.43%,Kappa系数由0.82提高到0.85;绝对值变差函数为纹理最佳窗口分析提供了理论依据,基于累积步长提取的纹理特征能显著提升图像分类的精度,分类准确率提高了13.94%,Kappa系数增加了0.17;基于多源复合数据的SVM高空间分辨率遥感图像分类方法能有效解决传统图像分类结果破碎的问题,比最大似然方法和决策树法的分类精度显著提高,总精度达到89.14%,Kappa系数为0.87,分别提高了6.85%和10.84%。实验表明,ZY-102C星HR数据在冬小麦信息提取中具有一定的稳定性和优势。     

承压井水位对气压动态过程的响应

本文从气压影响承压井水位的偏微分方程出发,考虑到井孔和含水层之间相互渗流的边界条件,得出了方程的解。给出了承压井水位对气庄动态过程响应的气压效率和位相滞后。讨论了气压效率和位相滞后与水井含水层系统各参数的关系。并指出气压效率越大的承压井,其含水层对应力应变的敏感程度越差。