Predicting quantiles of water quality from catchment characteristics

Water quality is often highly variable both in space and time, which poses challenges for modelling the more extreme concentrations. This study developed an alternative approach to predicting water quality quantiles at individual locations. We focused on river water quality data that were collected over 25 years, at 102 catchments across the State of Victoria, Australia. We analysed and modelled spatial patterns of the 10th, 25th, 50th, 75th and 90th percentiles of the concentrations of sediments, nutrients and salt, with six common constituents: total suspended solids (TSS), total phosphorus (TP), filterable reactive phosphorus (FRP), total Kjeldahl nitrogen (TKN), nitrate-nitrite (NO_x), and electrical conductivity (EC). To predict the spatial variation of each quantile for each constituent, we developed statistical regression models and exhaustively searched through 50 catchment characteristics to identify the best set of predictors for that quantile. The models predict the spatial variation in individual quantiles of TSS, TKN and EC well (66%–96% spatial variation explained), while those for TP, FRP and NO_x have lower performance (37%–73% spatial variation explained). The most common factors that influence the spatial variations of the different constituents and quantiles are: annual temperature, percentage of cropping land area in catchment and channel slope. The statistical models developed can be used to predict how low- and high-concentration quantiles change with landscape characteristics, and thus provide a useful tool for catchment managers to inform planning and policy making with changing climate and land use conditions.     

The characteristics of Asian dust events in Northeast Asia during the springtime from 1993 to 2004

The characteristics of Asian dust events that occurred in Northeast Asia during the springtime from 1993 to 2004 are investigated using 3-hourly SYNOP reports (World Meteorological Organization). Occurrences of blowing sand and dust storm are low in 1997 and 1999, but have increased rapidly since 2000. The maximum occurrence was recorded in 2002. Wind velocity of 6.5 m s^− 1 as a threshold wind velocity is not so exactly consistent with the occurrence of blowing sand. However, wind velocity of 14 m s^− 1 as a strong wind causing dust storm had similar tendency to those of dust storm and Dust Storm Index.Source regions of Asian dust are divided into three regions (A: dry arid, B: semi-arid, and C: cultivated), based upon the occurrence of blowing sand and dust storm. Eight meteorological stations are selected in three regions, which have frequent occurrences of blowing sand. Source regions of Asian dust that affect the Korean peninsula are gradually extending eastward. Positive anomalies of NDVI occurred in 1994, 1995, and 1998 when temperature was high and precipitation was heavy. However, the frequent occurrence of the dust phenomena is not always consistent with lots of vegetation, high temperature, and much precipitation in this study.     

Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

含有集约束向量极值问题的最优性条件

在序线性拓扑空间里研究了含有集约束向量极值问题的最优性条件,并建立了充分性和必要性条件.     

Contribution of storms to groundwater recharge in the semi‐arid region of Karnataka,India

This paper describes the application of environmental isotopes and injected tracer techniques in estimating the contribution of storms as well as annual precipitation to groundwater recharge and its circulation, in the semi‐arid region of Bagepalli, Kolar district, Karnataka. Environmental isotopes ²H, ¹⁸O and ³H were used to study the effect of storms on the hydrological system, and an isotope balance was used to compute the contribution of a storm component to the groundwater. Some of the groundwater samples collected during the post‐storm periods were highly depleted in stable isotope content with higher deuterium excess relative to groundwater from the pre‐storm periods. Significant variation in deuterium excess in groundwater from the same area, collected in two different periods, indicates the different origin of air masses. The estimated recharge component of a storm event of 600 mm to the groundwater was found to be in the range of 117–165 mm. There was no significant variation in environmental tritium content of post‐storm and pre‐storm groundwater, indicating the fast circulation of groundwater in the system. After completion of the environmental isotope work, an injected radiotracer ³H technique was applied to estimate the direct recharge of total precipitation to the groundwater. The estimated recharge to the groundwater is 33 mm of the 550 mm annual precipitation during 1992. Copyright © 2003 John Wiley & Sons, Ltd.     

Design of stable drainage networks in upland forestry plantations

Erosion of man-made, forestry drainage channels occurs when the plough cuts through the surface peat layer into the underlying erodible mineral soil. A procedure is developed, based on hydraulic considerations, which will allow the drainage engineer to design stable drainage networks in upland forestry plantations. An example design chart is given for an erodible sandy loam type soil.     

水库库岸滑坡涌浪的传播与爬高研究

基于流体力学明渠非恒定流的连续性方程、运动方程和沿程水头损失理论,把滑坡涌浪衰减过程分为急剧衰减和缓慢衰减两个阶段来考虑,并认为急剧衰减阶段的涌浪的衰减符合指数衰减规律,缓慢衰减阶段符合明槽水流的沿程水头损失规律,结合初始涌浪高度对涌浪沿岸的传播高度及爬坡高度进行了计算。以新滩滑坡为例对涌浪的传播及爬坡高度进行了计算,得出了滑坡涌浪衰减先快后慢以及传播3 km时的涌浪高度只有初始涌浪高度的30 %以及传播10 km时涌浪高度只有初始涌浪高度的13 %的规律。     

Poisson-Logistic二元复合极值模型在平台甲板标高设计中的应用

考虑到平台所在海区台风出现的频次及其诱发之风、浪、潮、流极端海况联合出现的概率特性，本文推导出Poisson—Logistic二元复合极值模式，并以平台甲板标高进行实例计算。新模式增加了概率模型的物理内涵，解决了Logistic模型阈值选取的任意性。对海洋工程极端海况荷载组合预测具有广泛的应用前景。     

Long-Period Distribution of Wave Heights and Its Application

This paper reveals that the long-period statistic distribution of the characteristic heights of deep-water waves assumes the lognormal distribution. Thereafter, the largest wave-height which may occur in the service life of coastal structures is derived in this paper.     

渤海南部海域年极值波浪和设计波浪的特征研究

本文用统计计算和后报方法，获得了本海域不同海区多年年极值波高（Ｈ１／１０）资料。用Ｐ－Ⅲ型和短期测波资料频率分析方法，估算了各海区的设计波高，并依据文献［３］计算出对应的平均周期。用Ｋｏｌｍｏｇｏｒｏｆｆ适合度方法检验所得的结果表明，依Ｐ－Ⅲ型方法拟配的理论频率曲线与经验点十分吻合，从而确定了本海域不同海区最佳的设计波浪。分析本海域年极值波浪的基本特征表明，本海域除了渤海湾北部海区以外，主浪向一般为ＮＮＥ向，渤海海峡区的年极值波高和设计波高均为最大，而向莱州湾及渤海湾沿岸海区逐渐减小；在沿岸海区，由龙口至黄河口一带的极值波高较大。