Post-breakup basaltic magmatism along the East Greenland Tertiary rifted margin

Mafic and ultramafic intrusions in East Greenland adjacent to the offshore Greenland–Iceland ridge were emplaced 5–9 My after continental breakup at 55 Ma [1]. Rare earth element (REE) concentrations determined by secondary ion mass spectrometry are reported for cumulus clinopyroxene from these intrusions, and the data are used to estimate REE abundance in equilibrium melts using available partitioning data. Estimated equilibrium melts from intrusions have strongly fractionated REE patterns with Nd/Dy(N) in the range 2 to 5.6 and Yb/Dy(N) 0.55 to 0.92, similar to values for coeval basalts. These melts have markedly higher Nd/Dy(N) than earlier breakup related flood basalts. The moderately low Yb/Dy(N) for the post-breakup volcanism is indicative of residual garnet in the source, while their high Nd/Dy(N) ratios can best be explained by aggregating low degree melts from a light-REE-enriched garnet- and spinel-bearing mantle source. We also report He, Sr, and Nd isotopic data for the intrusions. The highest ³He/⁴He ratios (>10 R/R_a) are found in the samples whose REE data reflect the largest proportion of melts from a garnet-bearing source, and having Sr and Nd isotopic compositions identical with the radiogenic Sr and unradiogenic Nd isotope end of the Iceland compositional field. There is no indication of a MORB-type mantle in the source of the intrusions. We postulate that post-breakup volcanism along the East Greenland coastline reflects the increasing proximity of the mantle plume to the East Greenland continental margin. The low degree of melting at high mean pressure inferred for the parental melts for the intrusions may reflect re-thickening of the lithosphere, which in turn was caused by the vigorous volcanism during breakup, with accompanying depletion of upper mantle and underplating of the crust at the continental margin.     

Impact of road‐generated storm runoff on a small catchment response

The impact of road‐generated runoff on the hydrological response of a zero‐order basin was monitored for a sequence of 24 storm events. The study was conducted in a zero‐order basin (C1; 0·5ha) with an unpaved mountain road; an adjacent unroaded zero‐order basin (C2; 0·2 ha) with similar topography and lithology was used to evaluate the hydrological behaviour of the affected zero‐order basin prior to construction of the road. The impact of the road at the zero‐order basin scale was highly dependent on the antecedent soil‐moisture conditions, total storm precipitation, and to some extent rainfall intensity. At the beginning of the monitoring period, during dry antecedent conditions, road runoff contributed 50% of the total runoff and 70% of the peak flow from the affected catchment (C1). The response from the unroaded catchment was almost insignificant during dry antecedent conditions. As soil moisture increased, the road exerted less influence on the total runoff from the roaded catchment. For very wet conditions, the influence of road‐generated runoff on total outflow from the roaded catchment diminished to only 5·4%. Both catchments, roaded and unroaded, produced equivalent amount of outflow during very wet antecedent conditions on a unit area basis. The lag time between the rainfall and runoff peaks observed in the unroaded catchment during the monitoring period ranged from 0 to 4 h depending on the amount of precipitation and antecedent conditions, owing mainly to much slower subsurface flow pathways in the unroaded zero‐order basin. In contrast, the lag time in the roaded zero‐order basin was virtually nil during all storms. Copyright © 2009 John Wiley & Sons, Ltd.     

Coupled HM analysis using zero‐thickness interface elements with double nodes—Part II: Verification and application

In a companion Part I of this paper (Int. J. Numer. Anal. Meth. Geomech. 2008; DOI: 10.1002/nag.735 ), a coupled hydro‐mechanical (HM) formulation for geomaterials with discontinuities based on the finite element method (FEM) with double‐node, zero‐thickness interface elements was developed and presented. This Part II paper includes the numerical solution of basic practical problems using both the staggered and the fully coupled approaches. A first group of simulations, based on the classical consolidation problem with an added vertical discontinuity, is used to compare both the approaches in terms of accuracy and convergence. The monolithic or fully coupled scheme is also used in an application example studying the influence of a horizontal joint in the performance of a reservoir subject to fluid extraction. Results include a comparison with other numerical solutions from the literature and a sensitivity analysis of the mechanical parameters of the discontinuity. Some simulations are also run using both a full non‐symmetric and a simplified symmetric Jacobian matrix. On top of verifying the model developed and its capability to reflect the conductivity changes of the interface with aperture changes, the results presented also lead to interesting observations of the numerical performance of the methods implemented. Copyright © 2008 John Wiley & Sons, Ltd.     

正弦激励下零浮力海洋拖缆动力特性与实验研究

海洋地震拖缆是海洋油气资源勘探中的关键设备,为研究海洋地震拖缆的动力特性及其在不同频率正弦激励干扰下的动力响应,建立了零浮力拖缆的数学模型,设计了一套完整的实验方案,通过弹性测力机构放大张力信号以排除环境干扰,测量了不同拖曳速度与激振频率条件下拖缆首部的张力变化及缆上位移响应情况,初步分析了正弦激励作用下零浮力拖缆的动力学响应。弹性测力机构具有良好的线性度与可重复性,拖缆受到的水阻力与拖曳速度的平方成正比,数值计算与实验结果对比验证了数学模型的正确性,初步分析了正弦激励作用下零浮力拖缆的动力学响应。     

基于主成分分析的相对重力观测零漂和固体潮提取

利用主成分分析PCA提取2014-08-15~23CG-5相对重力仪静态相对观测的零点漂移和固体潮。结果显示,PCA提取的零点漂移值与最小二乘线性拟合结果非常一致,其差仅在10-2μGal/d量级;PCA估算的固体潮值与CG-5重力仪内部软件提供的固体潮模型计算值统计结果基本一致,两者之差均小于8μGal,均方根均小于5μGal。     

Sheath effects on DEMETER ion drift measurements

The “Instrument d’Analyse du Plasma” on DEMETER includes an ion drift meter used to measure the direction of the incoming ram plasma ( [Berthelier et al., 2006a] and [Berthelier et al., 2006b]). Given the velocity of the satellite, and expected flow velocities of plasma along DEMETER's orbit, it is estimated that at mid latitudes, the direction of incident plasma as measured by IAP should be within approximately 2° of the ram direction. Yet, significantly larger angular deviations are measured routinely. An important assumption made in the interpretation of onboard instruments, such as IAP, is that neither the spacecraft nor the instrument significantly perturb the plasma that is being measured. In view of the large observed angular deviations, this paper examines the possible effect of the electrostatic sheath surrounding IAP. This is done with the 3D PIC simulation code PTetra. The model uses a full 3D particle in cell code with unstructured tetrahedral mesh capable of accurately representing the satellite geometry. The mesh is also adaptive so as to provide a fine spatial resolution in the vicinity of the particle sensor where it is needed, and a coarse resolution in regions where plasma parameters vary over a longer scale length. Calculation results show that while particle deflection associated with the electrostatic sheath near IAP can account for appreciable angular deflections for representative ionospheric plasmas, they are typically smaller than the ones observed. Additionally, the model is unable to reproduce the latitudinal dependence of the observed large deflection angles. It is concluded that sheath effects may cause appreciable distortions on the IAP type of ion flow meter instruments, and on other particle sensors in general. The larger observed deviations and their latitudinal dependence, however, must be attributable to other physical processes not accounted for in the model.     

Weed preference and growth of young grass carp in New Zealand

In each of eight 5‐day pond experiments carried out at intervals over a year, 0+ to 1 +‐year‐old grass carp, Ctenopharyngodon idella Val., were offered a choice of at least 10 species of water weeds from the Rotorua area. Water temperature was measured each day. Food selectivity decreased with increasing temperature and size of fish, but preference for the weeds did not change. At summer temperatures the fish ate much weed and grew at about 4g/fish/day, but in winter little food was taken and growth was slow.     

Diel patterns of mysid drift (Crustacea: Mysidacea) in the Taieri River estuary,New Zealand

Drifting mysids were sampled to determine diel activity, and whether mysid numbers vary with respect to inflowing and outflowing tides. Samples of drifting mysids were collected at the mouth of the Taieri River, New Zealand, over one 24‐h cycle using five replicate conical drift nets in January 1999. One‐night and 1‐day ebb and flood tide were each sampled. Four species of mysid Tenagomysis macropsis, T. novae‐zealandiae, T. robusta, and an apparently undescribed species of Gastrosaccus sp., were collected over the sampling period. One species, T. robusta, has not previously been collected from estuarine or riverine systems. The undescribed Gastrosaccus sp. was the most abundant of the four species. All four species were more abundant at night, with T. robusta and Gastrosaccus sp. being considerably more abundant in the drift on outflowing tides. In contrast, roughly equal numbers of T. macropsis and T. novae‐zealandiae were observed drifting in and out of the estuary at night.     

Perched lobe formation in the Gulf of Cadiz: Interactions between gravity processes and contour currents (Algarve Margin, Southern Portugal)

The Gulf of Cadiz is swept by the strong saline Mediterranean Outflow Water (MOW). On the Algarve Margin (South Portugal), this current has constructed fine-grained contourite drifts. This margin is dissected by the Portimao Canyon and three short channels that only incise the upper slope, and are absent on a terrace located at mid-slope depths along the Algarve Margin. High-resolution seismic profiles and sediment cores highlight the original architecture of the sedimentary deposits on this terrace. Coarse-grained lenticular chaotic bodies formed during major relative sea-level lowstands are intercalated within the drift. The lobate shape and sandy nature of the lenticular chaotic bodies and their location at the mouths of the three short channels suggest they are gravity-generated deposits that are perched on the middle continental slope.In the Gulf of Cadiz, the interaction between contour current and gravity processes is strongly controlled by climatic variations and relative sea-level changes during the late Quaternary. During cold periods when sea-level was low, erosion intensified on the continental shelf and the deepest part of MOW was active. Sediment was transported downslope through the channels and deposited on sedimentary lobes perched on the mid-slope terrace. During warm periods when relative sea-level was high, the supply of sediment from the shelf was shut off and the shallowest part of MOW was more active. Contourite drifts fill the channels and bury the sandy lobes.     

海洋重力仪稳定性测试与零点漂移问题

稳定性指标是海洋重力仪最重要的技术特性之一。针对国内对海洋重力仪稳定性测试与评估重视不够、数据处理过程欠规范、技术指标要求欠细化等现实问题,研究探讨了海洋重力仪稳定性测评的技术流程和数据处理方法,重点分析了环境因素和重力固体潮效应对测试结果的影响,提出了重力仪零点趋势性漂移、有色观测噪声与随机误差的分离方法,建立了比较完善的海洋重力仪稳定性评估指标体系,分析论证并进一步明确了重力仪零点漂移非线性变化的限定指标要求,为修订现行海洋重力测量作业标准提供了可靠的理论依据。