闽台铲状活动断裂

福建台湾大型铲状活动断裂系在深部(深5—100km)构成一系列向东倾斜、倾角为4°—10°的滑脱面,在近地表利用老断层的重新活动,形成NNE与NW向网格交叉的高角度断层。活动断裂系的地震能量释放主要集中在台湾东部。推断现代构造应力场的最大主压应力方向是NW—SE向,缓倾斜、向西撒开呈扇状特征。断裂系中各断裂的滑动速率不同,东大西小。     

A steady state model of the Somali current

A steady state model of the Somali current including forcing by both the curl and the divergence of the wind stress is discussed. The model equations are linear, but the results presented are for the one nonlinear case. The grid resolution was 12 km in the zonal and 24 km in the meridional direction. The streamfunction and velocity potential of the current are presented for forcing by divergence and compared with a situation when only the curl is present. The results indicate that a two-gyre system appears in July, a representative month for the summer monsoon, only when divergence is included. Computations with available data indicate that the divergence is comparable in magnitude to the curl near the location of the Somali current. The model produces three other important features: (i) strong upwelling off the east coast of Africa, (ii) downwelling over central Arabian sea and (iii) a strong eastward current in the upper layer towards the interior of the Arabian sea near 12°N.     

Long-term erosion on granitic roadcuts based on exposed tree roots

Exposed roots were used to estimate soil and bedrock erosion on the cut slopes of a 45-year-old road constructed in granitic soils of the Idaho Batholith. The original roadcut surface was defined by projecting a straight line from the toe of the cut past the end of the exposed root to the intersection of a straight line projected along the surface of the hillslope. A cross-sectioning technique was then used to determine erosion to the present roadcut surface. A total of 41 exposed root sites were used to estimate erosion on a 1350 m-long section of road. Average erosion was 1·0 and 1·1 cm/year for soil and bedrock respectively. Buttressing by tree roots caused lower erosion rates for soil as compared to bedrock. Both soil and bedrock erosion rates showed statistically significant correlations with the gradients of the original cut slope. The bedrock erosion data provide a reasonable estimate of the disintegration rate of exposed granitic bedrock exhibiting the weathering and fracturing properties common to this area. The road is located in a study watershed where long-term sediment yield data are available. Sediment data from adjacent study watersheds with no roads were compared to sediment data from the roaded watershed to estimate the long-term increase in sediment yield caused by the road. The increase amounts to about 2·4 m³/year. This figure, compared to the average annual on-site road erosion, provides an erosion to sediment delivery ratio of less than 10 per cent. Based on study results, road construction and maintenance practices are suggested for helping reduce roadcut erosion.     

Direct Measurement Of Shear Stress During Snow Saltation

Wind-tunnel experiments were carried out to measure the shear stressduring snow saltation. Shear stress acting on the snow surface, measured directly with a newly developed drag meter system, revealedthat the shear stress increased with the development ofsaltation. This result supports Owen's hypothesis that the saltationlayer acts as an increased roughness to the flow above the saltationlayer, leading to an increase in surface shear stress. To investigate the contribution of the grain borne shear stress_g and the fluid shear stress _f to the increment of the total shear stress _total, _g was calculated from the loss of horizontal momentum of saltating snowparticles. Since _g is the largest contribution to theincrement of _total, the collision of thesaltating particles is dominant for the shear stressmodification. The results qualitatively support the numericalsimulation reported by McEwan and Willetts.     

Rupture zones in the area of the 17.08.99 Izmit (NW Turkey) large earthquake (Mw 7.4) and stress changes caused by its generation

The M_w 7.4 Izmit earthquake of 17 August 1999 struck a part ofthe North Anatolian fault in the area of Izmit Bay (NW Turkey). Historicalinformation shows that the fault which moved during the generation of thisearthquake consists of two fault segments moved during the generation oflarge (M 7) earthquakes in 1719 and 1754, respectively. Since then onlythe central part (between Izmit and Lake Sapanca) of this fault ruptured bythe generation of a smaller shock (M = 6.6) in 1878.The spatial stress variations based on the calculation of changes in theCoulomb Failure Function (CFF) associated with this earthquake aresupported by the distribution of strong aftershock foci. Large positive valuesof CFF to the east and west of the mainshock epicenter are inagreement with the notion that secondary faults were triggered there by thegeneration of the main event. Large positive values of CFF are alsoobserved in the adjacent western fault segment where the 1766 event wasgenerated, evidencing the occurrence of the next strong earthquake in thissegment.     

漫湾水库蓄水前后库区地震活动性与构造应力场分析

对漫湾水库蓄水诱发地震作了分析，结果表明，蓄水后库区小震频次明显增加，近距离地震明显增多，在蓄水首次达到高水位和由高水位突降至低水位时，诱发了最强地震。表明蓄水对库区构造应力场产生了影响，使得局部应力场较区域构造应力场作用方向出现明显偏转，作用方式发生改变，呈现较大的垂直作用效应，节面错动出现较大正倾滑动分量。     

刚毛柽柳种子萌发对盐分与干旱胁迫的响应

通过对不同温度、盐分和干旱胁迫对刚毛柽柳种子萌发实验研究影响,结果表明:刚毛柽柳种子的适宜萌发温度范围为10~35℃,萌发率高达80%以上,且萌发迅速。不同浓度NaCl溶液对刚毛柽柳种子萌发有明显抑制作用,种子萌发率随NaCl溶液浓度的增大而下降,到0.7 mol/L时,萌发率仅为1.67%,种子发芽受到抑制。相同渗透势PEG-6 000溶液中的萌发率低于NaCl溶液,渗透势为-0.5 MPa是二者影响作用的分界点。渗透势为-1.8 MPa时,萌发率已急剧下降到0,其对种子萌发的抑制作用大于NaCl溶液。将在两溶液中处理10天的种子转移至蒸馏水后,随着NaCl溶液浓度的增大,萌发恢复率逐渐升高,0.7 mol/L时,萌发恢复率为60%;随着PEG-6 000溶液浓度增大,萌发恢复率先升高后降低,渗透势为-1.4 MPa时,种子萌发恢复率达到最大为67.5%,但两种处理下种子的最终萌发率(总萌发率)都低于在蒸馏水中的。     

Focal mechanisms of recent earthquakes in the Southern Korean Peninsula

We evaluate the stress field in and around the southern Korean Peninsula with focal mechanism solutions, using the data collected from 71 earthquakes ( M_L = 1.9–5.2) between 1999 and 2004. For this, the hypocentres were relocated and well-constrained fault plane solutions were obtained from the data set of 1270 clear P -wave polarities and 46 SH / P amplitude ratios. The focal mechanism solutions indicate that the prevailing faulting types in South Korea are strike-slip-dominant-oblique-slip faultings with minor reverse-slip component. The maximum principal stresses (σ₁) estimated from fault-slip inversion analysis of the focal mechanism solutions show a similar orientation with E–W trend (269°–275°) and low-angle plunge (10°–25°) for all tectonic provinces in South Korea, consistent with the E–W trending maximum horizontal stress (σ_Hmax) of the Amurian microplate reported from in situ stress measurements and earthquake focal mechanisms. The directions of the intermediate (σ₂) and minimum (σ₃) principal stresses of the Gyeongsang Basin are, however, about 90 deg off from those of the other tectonic provinces on a common σ₂–σ₃ plane, suggesting a permutation of σ₂ and σ₃. Our results incorporated with those from the kinematic studies of the Quaternary faults imply that NNW- to NE-striking faults (dextral strike-slip or oblique-slip with a reverse-slip component) are highly likely to generate earthquakes in South Korea.