煤矿采空区场地建筑适宜性工程地质研究方法

简述了煤矿采空区场地存在的工程地质问题；提出了查明采空区场地工程地质条件的现场勘察和室内模拟研究方法。并结合采空区活化特点，对采空区场地建筑适宜性作了分析；提出了地基处理和建筑物防护措施     

斜坡稳定性分析的模糊综合评判应用初探

采用两级模糊综合评判方法，在对评判实例的稳定性因素的定性分析基础上，选取主要因素四类１４项作为稳定性评价指标并将其定量化，按稳定，较稳定，较不稳定和不稳定四个级别进行综合评判，评判结果与斜坡的实际情况有较好的一致性。     

考虑入渗和蒸发影响的土坡稳定性分析方法

本研究建议的一种分析方法假定斜坡非饱和土体的水分运动参数及剪强度参数与饱和度的依赖关系均可根据实验或经验确定。通过数值计算方法妥任意给定的入渗和蒸发边界条件下斜坡土体的瞬态含水率分布及与其相对应的瞬态抗剪强度参数分布。在此基础上瞬态斜坡安全因数即可通过常规的稳定性分析方法求得。     

A Simple Parameterisation for Flux Footprint Predictions

Flux footprint functions estimate the location and relative importance of passive scalar sources influencing flux measurements at a given receptor height. These footprint estimates strongly vary in size, depending on receptor height, atmospheric stability, and surface roughness. Reliable footprint calculations from, e.g., Lagrangian stochastic models or large-eddy simulations are computationally expensive and cannot readily be computed for long-term observational programs. To facilitate more accessible footprint estimates, a scaling procedure is introduced for flux footprint functions over a range of stratifications from convective to stable, and receptor heights ranging from near the surface to the middle of the boundary layer. It is shown that, when applying this scaling procedure, footprint estimates collapse to an ensemble of similar curves. A simple parameterisation for the scaled footprint estimates is presented. This parameterisation accounts for the influence of the roughness length on the footprint and allows for a quick but precise algebraic footprint estimation.     

数据分析法确定嶂山闸闸基渗透压力

闸基渗透压力是影响水闸闸室稳定的关键性因素。当水闸同时受到上下游水位差、基底承压水头、粘性土地基扬压力滞后等多重因素作用时 ,闸基渗透压力的估算就变得比较困难。通过对嶂山闸闸基历年实测渗透压力数据进行统计分析 ,初步揭示其基底渗透压力的变化规律 ,为该闸闸室稳定性分析提供依据。     

巨厚火成岩在煤系中的水文地质意义

通过对海孜煤矿7煤各工作面突水的特征和水质对比等方法，结合采后形成的导水裂隙带高度，得出了导致7煤各工作面突水的水源是来自巨厚火成岩侵入时对围岩产生的破坏裂隙水，在此基础上提出了侵入裂隙的概念，突水通道为采后形成的导水裂隙，并针对突水成因，提出了控制采高和提前疏放等防治措施。     

冲积层防水煤柱上提工作面的防治水对策

开滦矿区煤系地层上覆由于防水煤柱留设过大，造成了大量的煤炭储量呆滞。为了提高煤炭资源回收率，确保安全生产，开滦林南仓矿在西二采区进行了工作面采后的导高观测试验研究，测量导水裂隙带岩层的漏失情况，为提高开采上限提供了地质依据，防水煤柱由原来的65m缩小到53m，成功地在1221上工作面进行了试验开采。     

高产高效综放工作面顶板水综合防治

通 过 对 T2195工 作 面 顶板 涌 水 水 质化 验 、周 边 开 采 情 况 的 综 合 分 析 认 为:T2195工 作 面 涌 水 以 5煤 层 顶 板 水为 主,地面 注 浆水 只是 起 了间 接补 给 作用 。为 此提 出 继续 进行 地 面注 浆、进一 步 完善 井下 排 水系 统等 有 针对 性的 防 治水 措施 ,确 保 工作 面的 高 产高 效。     

A model for grain-size sorting over tidal sand ridges

A model was developed and analyzed to quantify the effect of graded sediment on the formation of tidal sand ridges. Field data reveal coarse (fine) sediment at the crests (in the troughs), but often phase shifts between the mean grain-size distribution and the bottom topography occur. Following earlier work, this study is based on a linear stability analysis of a basic state with respect to small bottom perturbations. The basic state describes an alongshore tidal current on a coastal shelf. Sediment is transported as bed load and dynamic hiding effects are accounted for. A one-layer model for the bed evolution is used and two grain size classes (fine and coarse sand) are considered. Results indicate an increase in growth and migration rates of tidal sand ridges for a bimodal mixture, whilst the wavelength of the ridges remains unchanged. A symmetrical externally forced tidal current results in a grain-size distribution which is in phase with the ridges. Incorporation of an additional external M₄ tidal constituent or a steady current results in a phase shift between the grain-size distribution and ridge topography. These results show a general agreement with observations. The physical mechanism responsible for the observed grain-size distribution over the ridges is also discussed.Responsible Editor: Jens Kappenberg     

Monitoring and modelling of pore water pressure changes and riverbank stability during flow events

Pore water pressures (positive and negative) were monitored for four years (1996–1999) using a series of tensiometer‐piezometers at increasing depths in a riverbank of the Sieve River, Tuscany (central Italy), with the overall objective of investigating pore pressure changes in response to ?ow events and their effects on bank stability. The saturated/unsaturated ?ow was modelled using a ?nite element seepage analysis, for the main ?ow events occurring during the four‐year monitoring period. Modelling results were validated by comparing measured with computed pore water pressure values for a series of representative events. Riverbank stability analysis was conducted by applying the limit equilibrium method (Morgenstern‐Price), using pore water pressure distributions obtained by the seepage analysis. The simulation of the 14 December 1996 event, during which a bank failure occurred, is reported in detail to illustrate the relations between the water table and river stage during the various phases of the hydrograph and their effects on bank stability. The simulation, according to monitored data, shows that the failure occurred three hours after the peak stage, during the inversion of ?ow (from the bank towards the river). A relatively limited development of positive pore pressures, reducing the effective stress and annulling the shear strength term due to the matric suction, and the sudden loss of the con?ning pressure of the river during the initial drawdown were responsible for triggering the mass failure. Results deriving from the seepage and stability analysis of nine selected ?ow events were then used to investigate the role of the ?ow event characteristics (in terms of peak stages and hydrograph characteristics) and of changes in bank geometry. Besides the peak river stage, which mainly controls the occurrence of conditions of instability, an important role is played by the hydrograph characteristics, in particular by the presence of one or more minor peaks in the river stage preceding the main one. Copyright © 2004 John Wiley & Sons, Ltd.