Primary productivity in the western tropical Pacific and equatorial warm waters

ＩＮＴＲＯＤＵＣＴＩＯＮＢｙｓｔｕｄｙｉｎｇｃｈｌｏｒｏｐｈｙｌｌａｎｄｐｒｉｍａｒｙｐｒｏｄｕｃｔｉｖｉｔｙｉｎｏｃｅａｎ ,ｅｉｔｈｅｒｉｎｔｈｅｂｉｇ ｓｃａｌｅｏｒｉｎｔｈｅｓｍａｌｌｓｃａｌｅ ,ｔｈｅｐｒｏｄｕｃｔｉｖｉｔｙｄｉｓｔｒｉｂｕｔｉｏｎａｎｄｖａｒｉａｔｉｏｎｏｆｍａｒｉｎｅｏｒｇａｎｉｃｍａｔｅｒｉａｌｉｎｔｈｅｔｅｍｐｏ ｒａｌａｎｄｓｐａｔｉａｌｃａｎｂｅｕｎｄｅｒｓｔｏｏｄ .Ｔｈｅｓｅａａｒｅａｓ ,ｓｉｔｕａｔｉｎｇｉｎｔｈｅｗｅｓｔｅｒｎｔｒｏｐｉｃａｌＰａｃｉｆｉｃ…     

渭河下游河道调整过程中的复杂响应现象

应用系统复杂响应的原理研究三门峡水库上游渭河河道调整过程,表明上游河道河床形态对基面上升所作出的响应是复杂的,弯曲系数的变化为先减小而后增大,宽深比的变化是先增大后减小,比降由先减小而后增大,最后均趋于稳定.     

On the instability of “folded” equilibria of a flexible nonstretchable thread attached to the satellite in a circular orbit

The author considers a problem of Lyapunov's stability of relative equilibria of a flexible nonstretchable thread attached to the satellite moving in a circular Keplerian orbit in the first approximation. When it is in the position of relative equilibrium, the thread is known to be situated either along the radius vector of the orbit (the radial equilibrium) or along the circular orbit (the tangential equilibrium) and in each case the thread can be in a folded state. The author shows that folded radial equilibria of the thread are always unstable while tangential ones are unstable if the thread is sufficiently short in comparison with the radius of the orbit. The generalized Chetaev functional has been constructed to prove the instability.     

基于强跟踪性能的QEKF组合导航自适应滤波研究

以低成本陆用航姿参考系统（AHRS）/GPS紧耦合系统为研究对象,建立了基于伪距、伪距率、航向角的组合观测数学模型。引入强跟踪滤波（STF）算法,利用渐消因子的作用,增强滤波器对状态快速变化的跟踪能力。同时,针对微惯性器件漂移过大的缺点,采用二阶EKF（QEKF）方法,通过对Hessian矩阵的求解,补偿系统观测方程线性化的二阶截断误差。仿真表明：STQEKF方法可高速准确地逼近系统非线性模型,实现陆地载体导航控制,在传感器精度有限的情况下,使姿态和位置的控制效果较标准EKF分别提高了约8.9%-38.2%和48.7%-54.4%     

GPS技术在山区石油地震勘探测量中的应用

针对GPS技术在山区石油地震勘探测量中的工作方式,结合2007年度南盘江一桂中地区二维地震大剖面资料采集应用GPS的工程实例,介绍GPS技术应用的新进展。通过GPS静态测量和应用RTK技术放样物理点,从测前准备、数据处理、精度分析等方面,阐述提高作业精度、有效进行质量控制的方法,旨在最大限度地发挥GPS技术在山区施工中的作用。     

富宁洞哈钛铁矿

印支期暗色、致密块状辉绿岩中含较高的含铁矿物,地磁异常较高,为矿源层。辉绿岩与灰岩接触形成矽卡岩带为有利的含矿带。矿体沿大断裂或次级断层形成的通道侵入穹窿状构造中,于二叠系砂岩、板岩隔层的下部形成工业钛铁矿体。     

Using Topological Relationships to Inform a Data Integration Process

When spatial datasets are overlaid, corresponding features do not always coincide. This may be a result of the datasets having differing quality characteristics, being captured at different scales or perhaps being in different projections or datums. Data integration methods have been developed to bring such datasets into alignment. Although these methods attempt to maintain topological relationships within each dataset, spatial relationships between features in different datasets are generally not considered. The preservation of inter‐dataset topology is a research area of considerable current interest. This research addresses the preservation of topology within a data integration process. It describes the functional models established to represent a number of spatial relationships as observation equations. These are used to provide additional information concerning the relative positions of features. Since many topological relationships are best modelled as inequalities, an algorithm is developed to accommodate such relationships. The method, based on least squares with inequalities (LSI), is tested on simulated and real datasets. Results are presented to illustrate the optimal positioning solutions determined using all of the available information. In addition, updated quality parameters are provided at the level of the individual coordinate, enabling communication of local variation in the resultant quality of the integrated datasets.     

附加约束条件的序贯平差

从观测量分组的参数平差出发,详细推导了附加约束条件的序贯平差及其精度估计,讨论了附加约束条件的抗差序贯平差的计算过程.算例表明,推导的公式正确有效,简单实用,附加约束条件的序贯平差抗差估计能有效地抵制粗差的影响.     

四川德格错阿金矿特征与矿床成因初析

错阿金矿床赋存于理塘义敦群上三叠统瓦能组变基性火山岩中,金矿体受次级北北西-近南北向韧性-脆韧性剪切变质带控制,与金矿化有关蚀变主要为黄铁矿化、辉锑矿化和硅化、碳酸盐化、金云母化及石墨化。矿床成因为蚀变构造型。甘孜-理塘断裂带北段嗄拉、错阿、海子口三个矿化集中区内大部份化探异常具有面积大、强度高、梯度变化大、元素组合好等特点,具有很好的找矿前景。     

Hybrid seismic modeling based on discrete-wave number and finite-difference methods

Any calculation of seismic wave propagation comprising the seismic source, the travel path, and the receiver site in a single finite-difference (FD) model requires a considerable amount of computer time and memory. Moreover, the methods currently available for including point sources in the 2D FD calculations are far-field approximations only. Therefore we have developed a new hybrid method for treating the seismic wave fields at localized 2D near-surface structures embedded in a 1D background medium, and excited by a point source. The source radiation and propagation in the background model is solved by the discrete-wave number (DW) method, while the propagation in the local 2D structure is calculated by the FD method. The coupling between the two sets of calculations is performed on a rectangular excitation box surrounding the local structure. We show the usefulness of the method in ground-motion studies where both near-field source effects and local site effects are important. Technical problems connected with the inconsistency between the 3D source radiation and the 2D FD calculation are minor for the relatively distant in-plane point explosive sources, but are more serious for the in-plane dislocation sources.