滩海铺管敷缆船总体设计

针对胜利石油管理局“滩海铺管敷缆船”总体设计情况，分别从设计指标、基本功能、主要性能参数、关键技术和总体布置等几个方面进行了较详细的介绍。该装备具有性能指标先进、设备装备精良、工艺流程合理、安全可靠和注重环保的特点，适用于我国浅海油田及其它相同情况海域。     

Stress Analysis and Optimum Design of PDC Die for Offshore Drilling Engineering

The maximum internal tangential stress is a critical parameter for the design of the PDC （polycrystalline diamond compact） die that has been widely applied to offshore oil drilling. A new simple equation for the calculation of the stress is developed, and verified by the test data from Kingdream Corp. of China, the largest bit Company in China. An opti- mum method for the design of the PDC die is presented and demonstrated in detail, and software for the design and FEM analysis of the die is developed on the basis of the method. This software has been used in oil industry in recent years.     

Wave forces on a seawater intake caisson

The wave force on a seawater intake structure consisting of a perforated square caisson of 400 mm×400 mm size encircling a vertical suction pipe of 160-mm diameter is investigated using physical model studies. The porosity of caisson was varied from 1.6 to 16.9%. Regular and random waves of wide range of heights and periods were used. It is found that the force ratio (ratio of the force on perforated caisson to the force on caisson with zero percent porosity) reduces to an extent of up to 60% with increase in porosity of the caisson from 1.6 to 16.9%. The force ratio was found to increase with increase in relative wave height and reduces with increase in relative width. Multiple regression analysis of the measured data points was carried out and predictive equations for wave force ratios are obtained both for regular and random waves. The results of this investigation can be used in the hydrodynamic design of perforated caissons, which are widely used as seawater intake structures.     

区别于DSDP-ODP的深海保压保温天然气水合物钻探取心技术

到目前为止，任何深海天然气水合物原位岩心样品的钻探、取心技术都离不开ODP(大洋钻探计划)或DSDP(深海钻探计划)专用船舶钻探技术，该技术主要通过从工作母船上连接几百到几千米钻杆到海底，实现500—1000m的钻探，再通过不同类型PCS(保压取心器)与PTCS(保压保温取心器)取心工具实现样品采集。重要特点是投入经费巨大。新型保压保温取心钻具是将钻具直接固定在深海海底，实现样品的原位保真采集，针对国内外两类着底式天然气水合物钻探、取心技术进行了分析，对于深海浅表层天然气水合物原位样品采集作业反映了创新的思维、技术模式、设计方案与科学方法     

贝类育苗中几种水处理新方法应用的探讨

本文主要叙述磁化水、泡沫处理水、臭氧处理水、高分子重金属离子吸附剂在贝类育苗上的应用，介绍其使用方法、优点和不足，从而为贝类人工育苗创造出一个良好的水环境，使贝类育苗稳产高产。     

Nonlinear Behaviour of Coflexip Risers

A modified Newton-Raphson iterative technique is formulated for obtaining the static configuration of the Lazy "S" flexible marine riser between the floater and mid-arch buoy under its submerged self weight and the applied top tension. The geometrically non-linear problem is solved by finite difference with the above technique. The problem is formulated as a regular boundary value problem with specified moments and deflections at both ends. Usually the bending stiffness of the flexible riser made of Coflexip pipe is very low. By use of the above analysis, several flexible riser configurations are analyzed and their characteristic behaviors are investigated. Also, changes in the riser characteristics due to quasi-static motion of the floater end are estimated for the safety of the riser layout.     

Brief Account of Breakwater Construction in China

-The construction of breakwaters in China in more than 40 years since the founding of the People's Republic of China is reviewed. The construction of two main types of breakwater, upright breakwaters and rubble mound breakwaters, and the way in which they are built are expounded. Recommendations to improve the technology for future breakwater construction are presented.     

Acceptance criteria of defects in undersea pipeline using internal inspection

The purpose of this paper is to establish acceptance criteria for interpretation of the internal inspection results of undersea pipelines. There are no specific rules or guidelines for the acceptance criteria of existing pipelines using a certain internal inspection method. Acceptable criteria were established with a case study of a 609.6 mm (24 in.) diameter, concrete weight coated pipeline delivers fuel oil to a thermal power plant, Ghana. Parameters to be considered in the uncertainties of flaw sizing include the crack length, depth, orientation of the flaw, whether or not the flaw is surface breaking, and number of flaws. Fitness-for-services of other pipelines can be determined using the established criteria in this study. The method of inspection also affects the acceptance criteria. Imposing limitations at or beyond the limits of detection capability would obviously be counter-productive.