Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.     

Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar)

I present the derivation of the Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar), which is developed for adopting a non-diagonal background error covariance matrix in nonlinear variational analyses (i.e., analyses employing a non-quadratic cost function). POpULar is based on the idea of a linear preconditioned conjugate gradient method widely adopted in ocean data assimilation systems. POpULar uses the background error covariance matrix as a preconditioner without any decomposition of the matrix. This preconditioning accelerates the convergence. Moreover, the inverse of the matrix is not required. POpULar therefore allows us easily to handle the correlations among deviations of control variables (i.e., the variables which will be analyzed) from their background in nonlinear problems. In order to demonstrate the usefulness of POpULar, we illustrate two effects which are often neglected in studies of ocean data assimilation before. One is the effect of correlations among the deviations of control variables in an adjoint analysis. The other is the nonlinear effect of sea surface dynamic height calculation required when sea surface height observation is employed in a three-dimensional ocean analysis. As the results, these effects are not so small to neglect.     

Wave reflection from partially perforated-wall caisson breakwater

In 1995, Suh and Park developed a numerical model that computes the reflection of regular waves from a fully perforated-wall caisson breakwater. This paper describes how to apply this model to a partially perforated-wall caisson and irregular waves. To examine the performance of the model, existing experimental data are used for regular waves, while a laboratory experiment is conducted in this study for irregular waves. The numerical model based on a linear wave theory tends to over-predict the reflection coefficient of regular waves as the wave nonlinearity increases, but such an over-prediction is not observed in the case of irregular waves. For both regular and irregular waves, the numerical model slightly over- and under-predicts the reflection coefficients at larger and smaller values, respectively, because the model neglects the evanescent waves near the breakwater.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Stability of Temperature and Conductivity Sensors of Argo Profiling Floats

After recalibration of the temperature and conductivity sensors of three Argo profiling floats recovered after operations for four to nine months, the results indicate that the floats basically showed no significant drift, either in temperature or salinity, and adequately fulfilled the accuracy requirement of the Argo project (0.005°C for temperature and 0.01 psu for salinity). Only the third float showed a significant offset in salinity of about −0.02 psu, as expected from comparison between the float data and the shipboard conductivity-temperature-depth data. This offset was caused by the operational error of the PROVOR-type float, in which the surface water was pumped immediately after the launch, fouling the conductivity sensor cell. This revised version was published online in July 2006 with corrections to the Cover Date.     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

Bragg resonant reflection of carrier waves composing wave groups

Numerical analyses for the Bragg resonant reflection of carrier waves associated long waves due to sinusoidally varying seabeds are performed by using a set of coupled ordinary differential equations derived from the Boussinesq equations. The Boussinesq equations are firstly approximated with the Fourier decomposition. The coupled governing equations are then derived and used to simulate evolution of both short and long wave components. It is also found that wave groups are generated by two carrier waves with slightly different frequencies. The wave energy of the initial wave components is transferred to other harmonic components during propagation over a long distance. Evolution and reflection of both short and long waves were largely affected by nonlinearity.     

Wave Reflection Caused by Wave Overtopping and Sloping Top of Spructure

In this paper, the theoretical analysis and experimental studies are employed to investigate the reflection characteris-tics of partial standing waves caused by wave overtopping and sloping top of structures. Based on the principle of conser-vation of wave energy flux, the third-order Stokes wave theory is used to formulate the reflection coefficient at wave overtopping; the calculation results are regressed into an applied expression. A series of experiments of wave reflection for a vertical-wall structure with chamfered and overhanging upper sections are carried out to investigate the influence of top slope on wave reflection. The regularity of variation of wave reflection in this case is analysed based on the experimental results.     

Hilbert Transferin Applied to Separation of Waves

The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained.     

广东红海湾、珠江口及电白—阳江近海第四纪沉积

根据物探和钻探资料，研究区内第四纪沉积物可分为两部分，下部地震反射结构复杂，斜层理发育，粒度较粗，为晚更新世产物；上部的地震反射结构简单，呈水平状或近水平状结构，粒度较细，为全新世沉积。