Kinetics of fine wet grinding of zeolite in a steel ball mill in comparison to dry grinding

Batch wet grinding of zeolite was studied with emphasis on a kinetic study in a laboratory size steel ball mill of 200 mm diameter. The breakage parameters were determined by using the single sized feed fractions of − 850 + 600 µm, − 600 + 425 µm and − 425 + 300 µm for the zeolite samples. The S_i (specific rate of breakage) and B_i,j (primary breakage distribution) values were obtained for those feed size fractions in order to predict the product size distributions by simulation for comparison to the experimental data. The specific rates of breakage values for wet grinding in the first-order breakage region were higher than the dry values reported previously by a factor 1.7 at the same experimental conditions, but the primary breakage distribution (B_i,j) values were approximately the same. The simulations of the product size distributions of zeolite were in good agreement with the experimental data using a standard ball mill simulation program. The wet grinding of zeolite was subjected to slowing-down effect in the mill at 2 min of grinding, corresponding to an 80% passing size of about 400 µm. On the other hand, the slowing down effect in the dry grinding of zeolite was also seen at 4 min of grinding. In addition, effects of some operational parameters on dry and wet grinding of zeolite were determined by simulation using the breakage parameters obtained experimentally.     

黑龙江省松嫩平原南部土壤硒元素循环特征

硒(Se)是生态环境中重要的微量元素,其丰缺与人和动植物健康有着密切关系。选择黑龙江省松嫩平原南部,在多目标区域地球化学调查获取的Se元素数据基础上,采集大气干湿沉降、灌溉水、化肥等土壤硒输入端元,以及植物收割、下渗水等输出端元样品,计算土壤Se输入输出通量,研究土壤硒循环特征,并预测土壤Se未来发展趋势。结果发现:研究区总体上为土壤低Se区,Se不足和潜在Se不足面积占总面积的35.20%;土壤Se的主要输入途径为大气干湿沉降,可达总输入量的70%～90%,主要输出途径为土壤下渗水,约占总输出量的73%;研究区土壤Se为净积累状态,预测表明20年后土壤Se不足和潜在Se不足面积将从目前的35.20%下降到31.7%。     

粉细砂地层防渗帷幕综合施工方法

四川省武都水库右岸EL574 m灌浆平洞揭露出厚度2.3～9.8 m的粉细砂层,普通水泥高压灌浆无法形成可靠的防渗帷幕。采用高压旋喷、湿磨细水泥、化学灌浆的组合处理方式,取得了较好的施工效果。通过钻孔压水、大功率声波CT、单孔声波、钻孔全景数字成像等方法检测,表明达到了设计防渗要求。     

Elastic behavior of weakly cemented contact

We investigate the elastic behavior of weakly cemented contact. We show that the radial distribution of stresses and the stiffnesses of a cemented contact are governed by the ratio a/RΛ, where R, a, and Λ are, respectively, the grain radius, the contact size, and the ratio of the elastic moduli of cement and grains. Moreover, we show that a cemented contact is always less stiff than a Hertzian contact having a similar size. Finally, we propose accurate approximate expressions of the contact stiffnesses. Copyright © 2014 John Wiley & Sons, Ltd.     

水泥-粉煤灰浆液在水电站隧洞灌浆中的应用

针对三叉水电站引水隧洞Ⅳ标段围岩地质条件,详细分析了水泥-粉煤灰浆液在该工程引水隧洞灌浆中的应用情况。从应用情况综合分析可以得出,隧洞灌浆采用水泥-粉煤灰浆液是可行的,完全能满足设计要求,在保证灌浆质量的前提下,可以降低部分施工成本,具有较好的推广应用价值。     

Dynamic analysis of a cylindrical casing–cement structure in a poroelastic stratum

The transient response of a cylindrical casing–cement structure in a poroelastic stratum under dynamic radial tractions is one of the significant issues during the analysis of downhole operations and the selection of safe material. Based on the Biot theory and general elastic mechanics, this paper gives a set of exact solutions for radial displacement, stresses for the casing–cement system and the pore pressure of the infinite surrounding poroelastic stratum in the Laplace transform space. Solutions are presented for three different types of transient radial loadings acting on the surface of casing, i.e., suddenly applied constant load, gradually applied step load and triangular pulse load. Time domain solutions are obtained using a reliable numerical method of inverse Laplace transforms. A detailed parametric study about the transient response is presented both at the casing–cement interface and the cement–stratum interface, and the distributions of the pore pressure and the effective stresses in the stratum are also examined. Copyright © 2017 John Wiley & Sons, Ltd.     

桩底注浆钻孔灌注桩承载力的研究

通过天津地区几例钻孔灌注桩桩底注浆的静载荷试桩结果 ,分析天津地区钻孔灌注桩桩底注浆单桩竖向极限承载力标准值的估算方法     

立方氮化硼的应用与机械加工的技术进步

立方氮化硼内其具有“三高”特性，而成为一种理想的硬磨料得以发展，着重介绍了立方氮化硼磨具和刀具及其推广应用，并阐述其技术的发展对机械加工技术的进步具有重要的意义。     

流域水文年及丰枯水期划分方法

研究流域水文年及丰、枯水期划分方法,为水文水利计算提供科学依据。通过分析流域径流变化特点,提出径流累计距平法。将该方法用于黑河上游流域,结果表明:该方法为黑河上游流域确定了合理的水文年及丰、枯水期;在不同水文年起讫日下,黑河上游流域年径流时间序列的统计特性和典型年的径流年内分配特征发生显著变化。因此,径流累计距平法可用于划分流域水文年及丰、枯水期,统一水文年划分方式对水文水利计算十分必要。     

艾比湖区域地表水水化学特征干湿季变化及其控制因素

对2014年艾比湖区域的地表水进行观测和取样,综合运用多元统计、Piper阴阳离子三角图、Gibbs图等方法,对艾比湖区域干湿季地表水化学特征及控制因素进行了分析.结果表明：在湿季5月,Na⁺和Cl^-是占绝对优势的离子,分别占阳离子和阴离子总量的70.34%和52.97%,其次是Mg²⁺和SO₄^2-;在干季10月,Na⁺和Cl^-是占绝对优势的离子,分别占阳离子和阴离子总量的70.57%和66.48%,其次是Mg²⁺和SO₄^2-.进而判断出在湿季,艾比湖区域地表水水化学类型为以碳酸盐岩石和蒸发岩来源为主的HCO₃^--Ca²⁺-Na⁺型;而在干季,艾比湖区域地表水水化学类型为以碳酸盐岩石和蒸发岩来源为主的HCO₃^--Ca²⁺型.此外,探讨了离子控制的因素.就自然因素而言,在干湿季,艾比湖区域地表水化学离子组成受岩石风化作用和蒸发结晶作用的共同影响,大气降水的输入作用十分微弱.就人为因素而言,根据相关研究,干湿季人为活动中的主要因素是人口和地区生产总值,说明该区域受到人为活动的影响.本研究为我国干旱地区对于河水水化学变化、水质特征、水质保护都具有重要的意义.