海上多子阵立体组合气枪震源优化设计

应用气枪震源子波模拟软件,针对海上常用的6子阵,进行了不同气枪阵列组合情形下的震源子波模拟试算,提出了适应深水区地震勘探要求的立体阵列组合和交错排列组合的气枪阵列.子波模拟试算结果表明,多子阵立体阵列的设计能优化震源子波,同时,将传统的子阵列排列改成交错排列,将气枪阵列的大容量气枪放置在子阵中间位置可以明显提高子波性能,为深水区复杂地质结构条件下的震源设计参数优化提供理论依据.     

阵列相位激电法在弱极化异常区的试验效果

激电相位与极化率反映的都是岩（矿）石的极化特性。在某铜矿已知区上进行了试验工作。对比时间域激电测量和阵列相位激电测量的结果,发现与视极化率相比,相位参数对弱极化异常具有更为明显的反应,适合在弱极化区开展工作。     

基于分数阶Fourier变换的声波测井全波列特征时频分析

目前,阵列声波测井信号处理大多在时间域或频率域中进行。但是,单纯的时间域或频率域方法有很大的局限性。为了打破这些局限性,笔者将分数阶Fourier变换方法用于阵列声波测井信号的分析之中,研究了不同性质储集层中信号幅度随分数阶Fourier变换阶数变化的规律。实验结果表明:在干层,幅度呈"1"型分布;在水层,幅度呈"Y"型分布,"Y"的两支开口较小,在阶数大于0.3的区域中,幅度较大;在油层,幅度呈"Y"型分布,"Y"的两支开口较大,在阶数大于0.6的区域中,幅度较大。因此,分数阶Fourier变换在提取阵列声波测井蕴含的储集层流体性质信息方面具有很好的前景。     

Surfactant Enhance DLLME/FO‐LADS: Assay of Malachite Green Level in Aquatic Environment of Trout Fish

Malachite green (MG), a traditional agent used in aquaculture although is not approved; its low cost and high efficacy make illicit use likely. We developed a small‐scale, simple, and sensitive dispersive liquid–liquid microextraction procedure for the assay of trace amounts of MG in aquatic environment of Trout fish. Fiber optic‐linear array detection spectrophotometry with charge‐coupled device detector benefiting from a microcell was used for this purpose. The method is based on enhancement effect of an anionic surfactant on the extraction of MG in to very fine multidroplets of microextraction solvent which made assisted by disperser solvent. Under the optimum conditions, the enrichment factor 77.5 was obtained from a 5‐mL water sample. The calibration graph was linear up to 5 × 10^?7 mol L^?1 with detection limit of 1 × 10^?8 mol L^?1. The relative standard deviation for seven replicate measurements of 4 × 10^?7 and 5 × 10^?8 mol L^?1 of MG were 3.3 and 4.5%, respectively.     

Controlling NOx Emission of Crude Rice Bran Oil Blend for Sustainable Environment

The main objective of this work is to investigate the factors influencing the NOx control of a stationary diesel engine fuelled with crude rice bran oil blend with lesser effect on smoke density and brake thermal efficiency (BTE). Fuel injection timing, percentage of EGR, and fuel injection pressure are chosen as the factors for the objective and NOx emission, smoke density, and BTE are considered as the response variables. To critically analyze the effects of the chosen factors on the objective three levels were chosen in each factor and the experiments were designed by following the design of experiments method. Taguchi's L₉ orthogonal array was used to conduct the tests with different combination of factor levels. Through analysis of variance (ANOVA) method, the most influencing factors and also the significance of each factor affecting each response variable were found out. Response graph was drawn for each response variable to determine the optimum combination of factor levels in achieving the objective and the obtained combination was confirmed experimentally.     

Expanding the possibilities of two-dimensional multielectrode systems, with consideration to earlier geoelectric arrays

Recent two-dimensional multielectrode measurements are restricted to only a few geoelectric arrays. Realizing that specific features of nearly 90 other arrays are totally ignored, all original intentions as published about the development of new geoelectric arrays were reviewed. Apart from arrays, either already applied in two-dimensional geoelectric arrays or impossible to be applied in such systems, 61 forgotten once-developed arrays were found. These provide altogether 102 various solutions, which would be able to increase the efficiency of two-dimensional multielectrode measurements in some respect. 46 array solutions are able to enhance the depth of investigation; 9/11 array solutions give better vertical/horizontal resolution; 17 array solutions provide better planview images; 8 array solutions are worth applying in areas with limited access; 11 array solutions may reduce the effect of near-surface inhomogeneities. By reviving these forgotten arrays, it will be possible to develop versatile multielectrode systems, which are more adaptive to the diverse field needs.     

A fracture study by using bipole–bipole cross-well logging

Electrical Resistivity Tomography (ERT) can provide images of subsurface electrical structure between two boreholes. Data quality control is a key issue before ERT inversion. However, there is no effective data quality control method on an ERT survey. In this paper, a method called common current gather for a bipole–bipole array (CCGbb) was proposed to check ERT data quality in a rapid way. Synthetic models were conducted to compare the response difference between pole–pole array and bipole–bipole array. A field work at granite area was tested to verify the applicability of the proposed CCGbb method. From the results of this study, we suggested that conducting CCGbb before ERT inversion and a cross-borehole tracer test for both field data quality control and possible water conducting fractures (WCFs) delineation.     

兰州观象台存放台阵汶川M_S8.0强震动记录与分析

兰州观象台存放台阵在汶川特大地震中获取了10组三分量数字强震动加速度记录.本文依据这些实际观测资料研究了黄土场地在地震发生后的自由场地面运动加速度过程及其特征.结果表明在震源、场地和震中距相同情况下,场地上不同测点记录的加速度峰值存在一定程度的差异,较明显地反映了场地地形对EW分向地面自由场加速度的影响.10个测点的峰值加速度(PGA)均显示EW向大于NS向,而垂直向最小;各测点的傅里叶谱值,尤其是在小于1 Hz频段范围内,差异极小.     

Wave separation for the great Sumatra-Andaman earthquake with regional seismic array

We analyzed the seismic waveforms from the December 26,2004 Sumatra-Andaman earthquake recorded at broadband seismic stations in western Europe.Previous studies involving of the beam-forming technique and high frequency analysis suggest that the earthquake ruptured with a duration of around 500 s.This very long duration makes P wave overlap with later arrivals such as PP wave,which follows P in about 200 s.Since P waves are crucial for modeling earthquake processes,we propose an iterative method to separate...     

基于灰度匹配的序列影像的目标跟踪研究与实现

利用匹配算法对视频帧进行处理可以实现对特定目标的跟踪.通过在Matlab平台上利用基于灰度的匹配算法实现简单背景下的单目标跟踪,来说明目标跟踪的基本过程,并且对在Matlab平台上实现目标跟踪所遇到的坐标系转换、运算速度以及适用范围等问题进行了分析讨论.