Well tie for broadband seismic data

The seismic industry is increasingly acquiring broadband data in order to reap the benefits of extra low‐ and high‐frequency contents. At the low end, as the sharp low‐cut decay gets closer to zero frequency, it becomes harder for a well tie to estimate the low‐frequency response correctly. The fundamental difficulty is that well logs are too short to allow accurate estimation of the long‐period content of the data. Three distinctive techniques, namely parametric constant phase, frequency‐domain least squares with multi‐tapering, and Bayesian time domain with broadband priors, are introduced in this paper to provide a robust solution to the wavelet estimation problem for broadband seismic data. Each of these techniques has a different mathematical foundation that would enable one to explore a wide range of solutions that could be used on a case‐by‐case basis depending on the problem at hand. A case study from the North West Shelf Australia is used to analyse the performance of the proposed techniques. Cross‐validation is proposed as a robust quality control measure for evaluating well‐tie applications. It is observed that when the seismic data are carefully processed, then the constant phase approach would likely offer a good solution. The frequency‐domain method does not assume a constant phase. This flexibility makes it prone to over‐fitting when the phase is approximately constant. Broadband priors for the time‐domain least‐squares method are found to perform well in defining low‐frequency side lobes to the wavelet.     

冀中坳陷霸县凹陷文安斜坡沙三段储层特征及有效储层控制因素

综合运用岩心观察、薄片鉴定、物性分析等技术方法,系统分析了文安斜坡沙三段储层岩石学特征、成岩作用特征及储集特征。研究表明,文安斜坡沙三段储层岩石类型以岩屑长石砂岩为主,杂基含量低,成分成熟度和结构成熟度中等;储集空间以原生孔隙为主,占总孔隙的72.81%,储集物性较差,属中低孔-低渗特低渗储层;储层主要经历了压实作用/早期碳酸盐胶结→长石、岩屑溶解/石英次生加大/高岭石充填→石英溶解/碳酸盐胶结→黄铁矿胶结。在有效储层物性下限计算的基础上,选取孔隙度差值作为参数,系统分析了有效储层控制因素。有效储层的形成主要受沉积微相、粒度、分选、成岩作用以及地层压力控制。水下分流河道和河口坝微相中碎屑颗粒越粗,分选越好,杂基含量越少,有效储层越发育;胶结作用对储层物性的控制较明显,是影响中深层储层物性的主要因素;溶蚀作用主要表现为长石等硅酸盐矿物的溶蚀,平均增孔量3.42%;早期地层超压抑制压实作用,保护孔隙,是有效储层发育的有利因素。     

川西坳陷新页HF-1井须五段泥页岩吸附气含量主控因素及其定量预测模型

页岩气是一种重要的非常规天然气,其中相当一部分的天然气以吸附态存在。吸附气含量是页岩气资源评价和目标区优选的关键性参数,也是评价页岩是否具有经济开采价值的一个重要标准。为了探讨川西坳陷新页HF-1井须五段泥页岩吸附气含量主控因素,选取了该井须五段泥页岩样品进行同一温度下的等温吸附实验,获得页岩等温吸附特征曲线及Langmuir体积和Langmuir压力值,分析压力对页岩吸附气含量的影响程度,利用Langmuir模型计算地层压力条件下的吸附气含量。利用实验数据分析了新页HF-1井须五段泥页岩吸附气含量与比表面积、孔隙度、密度、成熟度、湿度和压力各单因素之间的相关关系,然后运用SPSS软件对吸附气含量的几个影响因素进行了主成分分析。结果表明：比表面积、湿度和压力是影响新页HF-1井须五段泥页岩吸附气含量的主要因素。最后建立了同时考虑这3个主控因素的页岩吸附气含量计算新模型。通过新模型可以计算出新页HF-1井须五段未知泥页岩的吸附气含量,计算结果与实测值之间相关系数高,结果准确可靠,是一种评价等温条件下页岩吸附气含量的好方法,对页岩吸附气含量评价具有一定的指导意义。     

Petrophysical software for interpreting integrated well-logging data based on spectrometric gamma-logging

This paper discusses modern techniques of identification of reservoir rocks of complex mineral composition in low-thickness layers. The principal purpose of the study is the elaboration of an optimal set of petrophysical investigations used for interpretation of well-logging (WL) data. The solution of the problem lies in generating a mineral-component model of sediments and in finding a range of admissible values of every macro component and its petrographic parameters.     

地质导向技术在煤层气水平井中的应用——以柳林区块某多分支水平井为例

地质导向技术能有效提高煤层气水平井施工成功率和煤层钻遇率,但由于其具有导向参数多、工艺要求高、易受地质因素影响等特点,使其在实际应用中还存在诸多难点。以柳林区块内某多分支水平井为例,针对该井现场地质导向作业面临的资料缺乏、参数受欠平衡钻进干扰、煤层结构复杂等难点,建立合适的地质导向模型,优选合理的导向参数和导向系统,对地质导向技术在实际应用中的工艺与流程进行了系统论述。实践表明,地质导向技术在该井的应用效果良好:煤层钻遇率达到了93.1%;截至目前,该井的产气量达8600m3/d,且还在进一步提升。     

塔里木盆地西北缘露头区奥陶系古溶洞地质建模

塔里木盆地西北缘奥陶系大型古溶洞广泛出露,为古溶洞露头地质建模提供了优越的条件。综合野外资料和Google Earth影像分析,将大型古溶洞以形态结构特征为依据划分成管道—厅堂连通型溶洞、单一管道孤立型溶洞、流线型溶洞3种类型;以存在形式划分成单一溶洞和溶洞群。其中,管道—厅堂连通型溶洞以潜流带型为主,在平面上沿主方位通过岩溶管道连接厅堂分布,厅堂大小不等,在50～50000m³之间变化;单一管道孤立型溶洞以渗流带型为主,平面上呈现单一管道线条状;流线型溶洞分布在潜流带中,从剖面上看呈近圆形、椭圆形和豆荚状等多种形状,包括顺层和斜交地层2种类型。结合各露头剖面中构造、地层条件及发育溶洞类型,明确管道—厅堂联通型溶洞受不整合面控制,分布在三间房、五道班和西克尔剖面中;单一管道孤立型溶洞受断裂系统控制,分布在一间房和硫磺沟剖面中;流线型溶洞主要分布在西克尔剖面,沿溶蚀沟道两侧分布;多种不同因素的耦合控制了溶洞群的分布。以此建立了综合大型古溶洞特征及其控制因素的古溶洞发育概念地质模型,以溶洞群为主要体积计算单元,通过与塔北奥陶系串珠进行体积对比,明确了地质模型的油气勘探意义。     

大直径气举反循环成套钻具的研制

介绍了大直径气举反循环成套钻具的研制背景、设计原则、结构尺寸和主要技术参数。该套钻具不仅强度大,连接便捷,而且充分考虑了通气、通泥浆、泥浆补给三大通道面积等因素,采用内平设计。经生产试验,完全能满足大直径工程井气举反循环钻进的需要。     

Contamination of a well in a uniform background flow

In this paper we describe the transport of pollution in groundwater in the neighbourhood of a well in a uniform background flow. We compute the rate at which contaminated particles reach the well as a function of the place of the source of pollution. The motion of a particle in a dispersive flow is seen as a random walk process. The Fokker-Planck equation for the random motion of a particle is transformed using the complex potential for the advective flow field. The resulting equation is solved asymptotically after a stretching transformation. Finally, the analytical solution is compared with results from Monte Carlo simulations with the random walk model. The method can be extended to arbitrary flow fields. Then by a numerical coordinate transformation the analytical results can still be employed.     

井喷关井水击分析及水击波速计算

油气井发生溢流或井喷后,立即关闭防喷器,关井期间防喷器需经受关井产生的水击压力作用。本文在对井喷关井水击的传播物理特征分析的基础上,推导直接关井水击压力计算公式,综合考虑井筒流体含气率、气液两相流型、固相类型等对水击波速的影响,推导水击波在气、液、固三相混合流体中传播速度计算公式,并通过算例对水击波速影响因素进行分析。计算表明水击波速对含气率变化非常敏感,钻井液含气率在0～0.001的时候,水击波速几乎是发生了突变,水击波速在含气率为0.001时仅为385 m/s,相比纯钻井液情况下降了67%,而钻井液固相含量、套管的内径和壁厚对水击波传播速度影响较小。     

非开挖导向钻进实际轨迹的控制设计

非开挖导向钻进技术，具有施工速度快、适用范围广等优点，得到了广泛的应用。在实际钻进中，由于钻进在地下的不确定性，影响了导向钻进的顺利进行。到得钻进中当前点的顶角、方位角和孔深，通过均角全距法原理，可以近似地描绘出当前钻孔的空间实际轨迹，并确定钻头的位置。应用这一原理，同时运用VisualBasic语言和AutoCAD绘图工具相结合的方法，编制一套应用程序，可以直接绘制出当前钻孔轨迹，并可实现对钻孔轨迹的调控，从而保证导向钻进的顺利进行。