随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

饱和软土压缩曲线的“反常”现象

饱和软土压缩试验时,经常出现压缩曲线“反常”、压缩系数“倒大”的现象。它是土的原始结构发生破坏前后的不同压缩性的客观反映。饱和软土的结构力很微弱,唯质量好的原状土才能见到这种“反常”。应从成孔、取样、测试及资料整理等多个环节保证其工程意义。     

Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.     

Optimization of nonconventional wells under uncertainty using statistical proxies

The determination of the optimal type and placement of a nonconventional well in a heterogeneous reservoir represents a challenging optimization problem. This determination is significantly more complicated if uncertainty in the reservoir geology is included in the optimization. In this study, a genetic algorithm is applied to optimize the deployment of nonconventional wells. Geological uncertainty is accounted for by optimizing over multiple reservoir models (realizations) subject to a prescribed risk attitude. To reduce the excessive computational requirements of the base method, a new statistical proxy (which provides fast estimates of the objective function) based on cluster analysis is introduced into the optimization process. This proxy provides an estimate of the cumulative distribution function (CDF) of the scenario performance, which enables the quantification of proxy uncertainty. Knowledge of the proxy-based performance estimate in conjunction with the proxy CDF enables the systematic selection of the most appropriate scenarios for full simulation. Application of the overall method for the optimization of monobore and dual-lateral well placement demonstrates the performance of the hybrid optimization procedure. Specifically, it is shown that by simulating only 10% or 20% of the scenarios (as determined by application of the proxy), optimization results very close to those achieved by simulating all cases are obtained.     

Optimization of SAGD Well Elevation

The application of steam-assisted gravity drainage (SAGD) to recover heavy oil sands is becoming increasingly important in the northern Alberta McMurray Formation because of the vast resources/reserves accessible with this mechanism. Selecting the stratigraphic elevations of SAGD well pairs is a vital decision for reservoir evaluation and planning. The inherent uncertainty in the distribution of geological variables significantly influences this decision. Geostatistical simulation is used to capture geological uncertainty, which is used can be transformed into a distribution of the best possible well pair elevations. A simple exhaustive calculation scheme is used to determine the optimum stratigraphic location of a SAGD well pair where the recovery R is maximized. There are three basic steps to the methodology: (1) model the uncertainty in the top continuous bitumen (TCB) and bottom continuous bitumen (BCB) surfaces, (2) calculate the recovery at all possible elevation increments within the TCB and BCB interval, and (3) identify the elevation that maximizes R. This is repeated for multiple TCB/BCB pairs of surfaces to assess uncertainty. The methodology is described and implemented on a subset of data from the Athabasca Oilsands in Fort McMurray, Alberta.     

斯通利波和渗透率的关系分析

理论和实际资料证明,在渗透性地层,低频斯通利波出现的频散和能量衰减与地层渗透率有关,因此可利用斯通利波的传播速度和能量衰减等特性来估算地层渗透率。斯通利波的能量和渗透率负相关。因为斯通利波能量代表了斯通利波的有关信息,因此可以认定斯通利波和渗透率负相关。     

高光谱遥感数据三次光滑样条滤噪

分析了高光谱遥感数据噪声滤波的作用和现状，实现了一种基于三次光滑样条函数的高光谱遥感数据噪声滤波算法，解决了目前高光谱遥感数据噪声滤波算法自适应效果不理想的问题。通过对AVIRIS数据试验，证明此方法简单易行，计算精度高，具有良好的局部自适应拟合能力，并能有效地滤除数据中的噪声，改善数据质量。