藏北羌塘南部埃迪卡拉系达布热组的建立及其地质意义

羌塘位于青藏高原腹地,构造上处于冈瓦纳大陆北缘。因其特殊的构造位置,羌塘地体的起源及构造演化对于探讨青藏高原的早期形成演化、冈瓦纳大陆裂解,以及特提斯洋演化等关键科学问题至关重要。最近,在羌塘南部达布热地区发现一套碎屑岩夹玄武岩的岩石组合,碎屑岩具有低成分成熟度的特点,虽然岩石发生了低绿片岩相变质,但仍然保留了原岩类复理石沉积的特点。根据碎屑锆石定年结果,该套地层中碎屑锆石的最年轻年龄为550Ma左右。此外,该套地层中玄武岩夹层的测年结果表明,该套地层形成于埃迪卡拉纪(约550Ma)。结合地层剖面及区域地层对比,建立了埃迪卡拉纪达布热组。达布热组是羌塘地区首次发现的埃迪卡拉纪地层,该组地层的建立为探讨冈瓦纳大陆北缘构造演化提供了重要线索。     

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.     

Faults in the Baikal region: morphostructural and structure-genetic features (case study of the Buguldeika fault junction)

Lineament analysis is applied to map the pattern of the Obruchev fault system in the Buguldeika Village area, where several fault zones (Olkhon, Primorsky, Prikhrebtovyi, Buguldeika, and Kurtun) make up a junction. As inferred from the predominant directions of genetically related lineaments, the Olkhon, Primorsky, and Prikhrebtovyi faults originated under NW-SE extension and compression. The extension and compression settings within these zones are reconstructed by analysis of lineaments that have prominent and poor geomorphic expression, respectively. However, the pattern of lineaments well expressed in the surface topography within a weakly deformed block corresponds to reverse slip, while that of poorly pronounced lineaments corresponds to left-lateral strike slip. The study confirms the idea that the latest extension (rifting) stage in the Baikal region reactivated fault zones but did not deform blocks. The blocks store record of residual deformation produced by previous settings of regional compression and shear. The obtained results agree with earlier tectonophysical analysis of faults and fractures in the area and prove the applicability of the suggested approach to map the fault patterns and reconstruct their respective stress settings in areas that underwent multiple deformation events of different ages.     

Crust structure of the northeastern Barents Sea basin area

Processing of data from regional geophysical surveys completed in the northern Barents Sea has provided updates to gravity and magnetic databases, structural maps of seismic interfaces, and positions of anomaly sources, which made a basis for 3D density and magnetic models of the crust. The new geological and geophysical results placed constraints on the boundaries between basement blocks formed in different settings and on the contours of deposition zones of different ages in the northeastern Barents Sea. The estimated thicknesses of sedimentary sequences that formed within certain time spans record the deposition history of the region. There is a 20-50 km wide deep suture between two basins of Mesozoic and Paleozoic ages in the eastern part of the region, where pre-Late Triassic reflectors have no clear correlation. The suture slopes eastward at a low angle and corresponds to a paleothrust according to seismic and modeling data. In the basement model, the suture is approximated by a zone of low magnetization and density, which is common to active fault systems. The discovery of the suture has important geological and exploration implications.     

内蒙古巴林右旗晚二叠世埃达克质火山岩特征及其地质意义

内蒙古东南部巴林右旗地区发育晚二叠世埃达克质火山岩,岩石组合为安山岩、粗安岩、英安岩及辉石安山岩,其LA-ICP-MS锆石U-Pb测年结果为256.7±2.7Ma,指示其形成于晚二叠世。地球化学特征显示,该套火山岩属准铝质-弱铝质中钾钙碱性岩石系列,具富Si(SiO_256%)、高Al(Al_2O_315%)、富Na、贫K、高Sr、低Yb和Y等特征,Na_2O/K_2O值为2.33~3.90,Mg~#值为35.3~60.8;稀土元素总量为96.69×10~(-6)~192.4×10~(-6)、轻重稀土元素分馏较明显((La/Yb)_N值为6.27~13.82),具正的Eu(δEu=1~1.67)异常,在原始地幔标准化蛛网图中,富集大离子亲石元素Rb、Ba、U,亏损高场强元素Nb、Ta,为O型(大洋型)埃达克质火山岩地球化学特征。综合区域资料,巴林右旗埃达克质火山岩是残留在地幔中的古亚洲洋残余洋壳部分熔融并受到地幔橄榄岩混染形成的,暗示晚二叠世存在古亚洲洋向华北板块俯冲消亡事件。     

Depositional setting,provenance, and tectonic-volcanic setting of Eocene–Recent deep-sea sediments of the oceanic Izu–Bonin forearc,northwest Pacific (IODP Expedition 352)

New biostratigraphical, geochemical, and magnetic evidence is synthesized with IODP Expedition 352 shipboard results to understand the sedimentary and tectono-magmatic development of the Izu–Bonin outer forearc region. The oceanic basement of the Izu–Bonin forearc was created by supra-subduction zone seafloor spreading during early Eocene (c. 50–51 Ma). Seafloor spreading created an irregular seafloor topography on which talus locally accumulated. Oxide-rich sediments accumulated above the igneous basement by mixing of hydrothermal and pelagic sediment. Basaltic volcanism was followed by a hiatus of up to 15 million years as a result of topographic isolation or sediment bypassing. Variably tuffaceous deep-sea sediments were deposited during Oligocene to early Miocene and from mid-Miocene to Pleistocene. The sediments ponded into extensional fault-controlled basins, whereas condensed sediments accumulated on a local basement high. Oligocene nannofossil ooze accumulated together with felsic tuff that was mainly derived from the nearby Izu–Bonin arc. Accumulation of radiolarian-bearing mud, silty clay, and hydrogenous metal oxides beneath the carbonate compensation depth (CCD) characterized the early Miocene, followed by middle Miocene–Pleistocene increased carbonate preservation, deepened CCD and tephra input from both the oceanic Izu–Bonin arc and the continental margin Honshu arc. The Izu–Bonin forearc basement formed in a near-equatorial setting, with late Mesozoic arc remnants to the west. Subduction-initiation magmatism is likely to have taken place near a pre-existing continent–oceanic crust boundary. The Izu–Bonin arc migrated northward and clockwise to collide with Honshu by early Miocene, strongly influencing regional sedimentation.     

柴达木盆地东部上石炭统克鲁克组碎屑岩储层特征及控制因素

柴达木盆地上石炭统克鲁克组是该区重要的古生界勘探层位,组内发育多套良好的碎屑岩层。为探究其岩石物性特征及控制因素,本次以野外露头调查为基础,利用普通薄片、铸体薄片鉴定及扫描电镜等手段,结合物性测试和压汞资料,对克鲁克组碎屑岩纵向分布规律,储层岩性、物性、孔喉特征及孔隙类型进行分析。认为克鲁克地层中克2段发育的三角洲前缘亚相和克3段的具障壁海岸潮坪相的大套含砾粗砂岩、粗砂岩砂体原生、次生孔洞发育,孔喉大、分布集中、分选好,为有利的碎屑岩储层。早成岩期压实作用、重结晶及胶结作用对克鲁克组砂岩的原生孔隙破坏严重,晚成岩期储层改造形成的溶孔、裂缝—溶孔是油气成藏的主要储存空间。该研究为预测柴东石炭系克鲁克组油气有利区域提供依据,为今后该地区的油气勘探提供理论支撑。     

准噶尔腹部火山岩风化壳储层特征及其影响因素

文章通过大量岩芯、铸体薄片观察和测井资料分析,对准噶尔腹部石西石炭系火山岩风化壳储层进行了详细地研究。研究结果表明,该火山岩风化壳储层的储集空间主要有基质溶孔、气孔或杏仁体溶孔、角砾间溶孔、微裂缝和裂缝等,其中与裂缝连通的各类溶孔占主导地位;在岩石分布上以集块岩、条带状熔岩、角砾熔岩和致密凝灰岩为主,玄武岩、安山岩和流纹岩则相对较少;储层物性主要表现为高孔低渗,只有裂缝具有较高的渗透率,且裂缝以高角度缝和直立缝为主。研究还发现,岩性岩相、裂缝和风化淋滤作用是影响该风化壳储层的主要因素。区内油层主要聚中在构造高部位、靠近断裂带和有利岩相区域;油层分布在离石炭系风化壳顶面25~150 m的范围内。     

云南省澜沧地区风化壳型稀土矿化的新发现及找矿前景

云南省澜沧地区位于滇西南地区,地处西南"三江"造山带南段,主体属班公湖-怒江-昌宁-孟连结合带南段,是云南省重要的铅锌银多金属矿分布区,以往在澜沧地区开展了诸多铅锌银矿调查工作,未对澜沧地区稀土矿化进行详细工作,本次通过矿产地质调查工作发现有花岗岩风化壳型、火山岩风化壳型、灰岩风化壳型三种不同的稀土矿化类型,其中花岗岩风化壳型稀土矿化具有较大的含矿层位面积,估算稀土资源量达大型;灰岩风化壳型矿化为调查区新发现类型稀土矿化,矿化与土壤地球化学异常吻合,稀土总量品位较高,含矿层位具有连续性,已开展概略调查地区估算稀土资源潜力达中型以上,具有较好的稀土矿找矿前景,今后对研究区开展详细的验证工作,特别是对灰岩风化壳型稀土矿化区开展研究,全面探索矿化层位特征、含矿性特征,有望取得新的找矿突破。     

渤海湾盆地南堡凹陷南部深层沙一段优质碎屑岩储层特征及成因机制

利用岩芯、薄片、扫描电镜和分析化验等资料,对南堡凹陷南部深层古近系沙一段（沙河街组一段）优质碎屑岩储层特征进行了分析并揭示其成因机制。研究表明：①南堡凹陷南部沙一段优质碎屑岩储层属于低孔中渗储层,发育原生孔隙、次生孔隙和微裂缝;②沙一段沉积期处于强水动力沉积环境,辫状河三角洲前缘水下分流河道砂体普遍发育,岩性主要为中粗砂岩、含砾砂岩和砂砾岩等粗岩性,岩石类型主要为岩屑长石砂岩,石英、岩浆岩岩屑等刚性组分含量高,储层在强压实作用下仍保留了局部原生残余粒间孔,部分刚性组分强压条件下形成微裂缝;③沙一段与东三段为区域不整合接触,大气水的酸性流体在成岩初期以及烃源岩成熟之后产生的有机酸在成岩后期通过油源断裂和不整合面进入储层,造成长石、易溶碎屑等组分溶蚀形成次生孔隙,溶蚀作用不仅增加孔隙空间,而且扩大喉道宽度。结论认为：粗岩性和高刚性颗粒含量为原生孔隙的保存提供了物质基础;油源断层、不整合面为酸性流体的进入提供路径,促进了次生孔隙发育。