Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.     

Lithium and lithium isotope profiles through the upper oceanic crust: a study of seawater-basalt exchange at ODP Sites 504B and 896A

Ocean Drilling Program (ODP) Hole 504B near the Costa Rica Rift is the deepest hole drilled in the ocean crust, penetrating a volcanic section, a transition zone and a sheeted dike complex. The distribution of Li and its isotopes through this 1.8-km section of oceanic crust reflects the varying conditions of seawater alteration with depth. The upper volcanic rocks, altered at low temperatures, are enriched in Li (5.6-27.3 ppm) and have heavier isotopic compositions (δ⁷Li=6.6-20.8‰) relative to fresh mid-ocean ridge basalt (MORB) due to uptake of seawater Li into alteration clays. The Li content and isotopic compositions of the deeper volcanic rocks are similar to MORB, reflecting restricted seawater circulation in this section. The transition zone is a region of mixing of seawater with upwelling hydrothermal fluids and sulfide mineralization. Li enrichment in this zone is accompanied by relatively light isotopic compositions (−0.8-2.1‰) which signify influence of basalt-derived Li during mineralization and alteration. Li decreases with depth to 0.6 ppm in the sheeted dike complex as a result of increasing hydrothermal extraction in the high-temperature reaction zone. Rocks in the dike complex have variable isotopic values that range from −1.7 to 7.9‰, depending on the extent of hydrothermal recrystallization and off-axis low-temperature alteration. Hydrothermally altered rocks are isotopically light because ⁶Li is preferentially retained in greenschist and amphibolite facies minerals. The δ⁷Li values of the highly altered rocks of the dike complex are complementary to those of high-temperature mid-ocean ridge vent fluids and compatible to equilibrium control by the alteration mineral assemblage. The inventory of Li in basement rocks permits a reevaluation of the role of oceanic crust in the budget of Li in the ocean. On balance, the upper 1.8 km of oceanic crusts remains a sink for oceanic Li. The observations at 504B and an estimated flux from the underlying 0.5 km of gabbro suggest that the global hydrothermal flux is at most 8×10⁹ mol/yr, compatible with geophysical thermal models. This work defines the distribution of Li and its isotopes in the upper ocean crust and provides a basis to interpret the contribution of subducted lithosphere to arc magmas and cycling of crustal material in the deep mantle.     

Estimates of lichen growth–rate in northern Sweden

Two lichenometric techniques were compared in a study of lichen growth–rate in northern Sweden. The first technique, based on the maximum lichen diameter on glacier moraines, was identical to the technique used in the 1970s, whereas the other utilized the lichen diameter measured on 100 randomly selected boulders. The results indicate that it does not matter which technique is chosen, as long as the technique is used consistently on both the calibration surfaces and the surfaces to be dated. The use of data from both the 1970s and the 2000s increased the number of calibration surfaces available. The new calibration curve indicates that the age of Little Ice Age moraines was underestimated by up to about 30 years in the study conducted in the 1970s.     

层状岩质边坡的屈曲破坏分析

本文根据多层层状结构岩质边坡的屈曲破坏模式，建立了相应的力学模型，从理论上对这种形式的破坏机理进行了研究，得出了相应力学模型的挠曲曲线的理论解。对具体工程实例的应用表明，本文的研究成果不仅能解决具体工程问题，而且有助于深入理解该类边坡的屈曲破坏机理。     

川藏公路拉月滑坡的块状破坏特征

拉月滑坡位于东久河左岸，为典型的高位岩质滑坡。1967—08—29拉月一带山体突然发生特大型滑坡，体积超过千万立方米，是川藏公路线上著名的“拉月大塌方”灾害。文章应用块状岩体稳定性分析方法，对同结构岩石块体相互嵌合、形成具不同稳定状况的的岩体结构、控制了滑坡的发生的特点进行了分析，证明该方法判别岩质滑坡的稳定性是非常有效的。岩质滑坡在西藏与西南地区都十分普遍，因此，通过对拉月滑坡块状破坏过程的分析，对其它岩质滑坡的稳定性判别具有很好的借鉴作用。     

从江县翁浪金矿床容矿岩石与围岩蚀变及其找矿标志

文章简单介绍了构造蚀变岩型金矿翁浪金矿床的容矿岩石和围岩蚀变特征，指出该类矿床的找矿标志，对进一步寻找此类矿床有一定的意义。     

阿尔泰可可塔勒铅锌矿床围岩蚀变及成因

可可塔勒铅锌矿床受火山喷发中心和沉积洼地控制，铅锌沉淀于海进阶段的局限还原卤水池中；矿下存在大型蚀变带，构成成矿流体对流循环过程中的水-岩作用带；后期造山挤压过程使地层和矿体倒转，矿床最终定位于麦兹倒转向斜之北东倒转翼的东南近转折部位。指出该矿床属海底火山喷流沉积改造型块状硫化物铅锌矿床。