海洋微塑料检测技术研究进展

海洋微塑料污染目前已成为全球性的环境问题,近年来海洋微塑料检测技术越来越受到人们的关注。本文简要总结了微塑料样品采集及处理方法,并从检测方法的角度系统综述了近些年来微塑料检测技术的研究进展,涉及目视分析法、光谱法(如傅立叶变换红外光谱法和拉曼光谱法)、热分析法以及其他分析方法等(如质谱法以及扫描电子显微镜-能谱仪联用法)。本文简要评价了各类检测方法的优缺点,以期为海洋微塑料检测技术的发展提供参考,并探讨了未来海洋微塑料检测技术的发展方向。     

电子地图多尺度显示中“放大镜”效果的实现

"放大镜"效果是电子地图多尺度表达的形式之一,能够以更多的细节显示某个或某几个重点,而其他区域则以较少的细节表示。"放大镜"效果的实现需要从数学基础、数据组织、显示调度等多方面进行改造,针对上述几方面讨论了"放大镜"效果的实现方式,并进行了实验论证。     

基于云存储技术的海岛信息管理和 展示平台设计与实现

随着海岛遥感影像数据的不断积累,传统数据存储管理方法越来越难以满足需求。针对上述问题,利用云存储技术对海岛影像数据进行分块组织,建立分布式海岛影像数据集,并在优化数据存储的同时,设计了一套海岛信息多形式展示平台。实现了信息检索、数据传输与审核、分析评价、成果展示和共享等功能。     

彩色全息显示中液晶空间光调制器位相调制偏差的矫正方法

采用三基色激光照明并结合时分复用或空间复用技术,可实现基于液晶空间光调制器(LC-SLM)的彩色全息显示. 但由于在不同激光波长入射条件下LC-SLM的位相调制特性曲线不同,难以同时满足多波长入射条件下2π线性位相调制的要求,致使彩色全息再现结果受到共轭像和零级斑的干扰. 针对该问题,本文通过实验测试获得LC-SLM在不同波长入射时的位相调制特性曲线,并分析了RGB激光器各分量的位相调制特性曲线非线性偏差和调制幅度偏差对多阶位相型傅里叶变换相息图再现效果的影响. 根据"查表法"建立了各波长入射条件下满足2     

Direct observation of complex Tóthian groundwater flow systems in the laboratory

Based on the theory of gravity‐driven groundwater flow systems, we have developed a complex Flow System Sand‐Box Model (FSM). It enables the visual observations of the development and characteristics and temporal evolution of complex Tóthian flow systems in the laboratory. The configuration of the regional, intermediate and local flow systems can be controlled and observed; hydraulic head, flow direction and travel time can be measured; and the scale and shape of the sub‐flow systems as well as the path lines and flow lines can be observed directly. The experiments demonstrate the Tóthian flow systems in a small basin with multiple sources and sinks. Greater local topographic (water table) undulation will lead to larger local flow systems. Greater regional and less local topographic undulation will enhance the development of intermediate and regional flow systems. In homogeneous media, increasing fluid‐potential differences between source and sink increase the spatial scale of the generated flow systems. The FSM is a useful teaching aid and experimental device to study and develop an intuitive insight into gravity‐driven groundwater flow systems. It helps to visualize and understand the hydraulic properties and controlling factors of Tóthian flow systems and may be used to study problems related to the chemical and temperature characteristics of the flow systems as well. Copyright © 2010 John Wiley & Sons, Ltd.     

BPM时号传播时延的连续观测与研究

利用新研制的短波传播时延实时数字显示系统,在武汉电离层观象台对BPM时号的传播时延进行了长时间连续观测。发现这种时延曲线的主要特征是:它是分段光滑的,光滑段工的相对时间比对精度可优于0.1ms;各光滑段之间,时延值发生突跳。结合多普勒图和频高图的同时观测记录,解释了时延突跳的原因,着重说明了突跳好几毫秒的所谓异常时号的传播机制。此外,还讨论了提高短波授时精度的某些技术措施。     

Areal extent of the 1988 flood in Bangladesh: How much did the satellite imagery show?

This paper presents the methods and results of visual interpretation of satellite imagery for estimating areal extent of the 1988 flood in Bangladesh. The main limitation of this method was that cloud-free images were not available for the peak flood period in the first week of September. Relatively cloud-free images on three selected dates in the last three weeks of September showed that areas of inundation on those dates ranged from 44000 to 60000 km² ± 5% (31 to 42% of Bangladesh). The Government of Bangladesh official estimates of the areal extent of flooding were tentative in nature, since these were based on a choropleth map of relative proportions (percentages) of flooding in different parts of the country. The official estimate of the maximum extent of flooding was 82000 km² (57% of Bangladesh), i.e. 15 to 26% larger than the area shown on satellite imagery. The actual extent of flooding was certainly larger than the estimates from satellite imagery but, perhaps, smaller than the official estimates, since a reduction of 15 to 26% of flood area in one to three weeks seemed unlikely. An alternative method of mapping flood-affected areas by using newspaper-interpreted data was attempted, but the method had limited values because of reporting bias.     

视景地形仿真及其应用

本文主要讨论了视景地形仿真的特点、数据基础及其实现的整个过程，列举了视景地形仿真在军事上和其它领域的应用实例。实验表明，本文所介绍的视景地形仿真过程简单而容易实现，仿真的地形景观具有良好的视觉效果。     

微机双道原子荧光光度计测控系统设计

该系统采用串口通信方式完成嵌入式单片机系统^[1]和计算机之间通信，通过测量待测溶液和标样的荧光强度来计算待测液中某痕量元素的含量，该系统具有图形化友好菜单操作、可视化的曲线分析和数据处理等特点。     

电子地形图符号体系的研究

随着数字制图技术的发展,电子地图的应用日益增多,为保证地理信息感知和认知的一致性与准确性,达到信息与资源共享,电子地形图符号的规范化、标准化势在必行。文中针对此种需求介绍了电子地形图符号体系和符号标准化的研究现状,分析了电子地形图符号体系中存在的主要问题,详细阐述了电子地形图符号体系构建的基本原则、内容以及体系结构,并且结合示例进行了说明,为电子地形图符号体系的研究提供了一些思路。