A new theoretical solution of the effect of atmospheric pressure on water level

Based on the partial differential equation governing the effect of atmospheric pressure on water level of confined well, deriving the boundary condition and considering the seepage water between well and aquifer, the author obtained the analytical solution of water level change in time domain under the action of an atmospheric pressure history with the Laplace transform method. This solution is composed of two terms:stable and retarded terms. The stable term is the multiplication of barometric efficiency and simultaneous atmospheric pressure, and it implies the value of water level after infinite time when the atmospheric pressure is a constant from the time in question. The retarded term is the transient process due to the time lag of water exchange between well and aquifer. From the solution, it is obtained that the interference of atmospheric pressure on water level is the integral superimposition of the contribution of all atmospheric pressure changes before the time in question. So that, we further found out the response function of pulsive atmospheric pressure history. Calculation shows: (1) The pulsive response function starts from zero and tends to a steady value, which is proportional to the barometric efficiency, when the time tends to infinity; (2) The retarded time depends on the mechanical property of aquifer and the radius of well. The larger the seepage coefficient, the smaller the radius of well and the thicker the aquifer, then the shorter the retarded time gets. This solution can be used as the theoretical basis for further analysis of the atmospheric effect and practical correcting method in the future.     

Acceleration response modification factors for nonstructural components attached to inelastic moment‐resisting frame structures

A statistical analysis of the peak acceleration demands for nonstructural components (NSCs) supported on a variety of stiff and flexible inelastic regular moment‐resisting frame structures with periods from 0.3 to 3.0 s exposed to 40 far‐field ground motions is presented. Peak component acceleration (PCA) demands were quantified based on the floor response spectrum (FRS) method without considering dynamic interaction effects. This study evaluated the main factors that influence the amplification or decrease of FRS values caused by inelasticity in the primary structure in three distinct spectral regions namely long‐period, fundamental‐period, and short‐period region. The amplification or decrease of peak elastic acceleration demands depends on the location of the NSC in the supporting structure, periods of the component and building, damping ratio of the component, and level of inelasticity of the supporting structure. While FRS values at the initial modal periods of the supporting structure are reduced due to inelastic action in the primary structure, the region between the modal periods experiences an increase in PCA demands. A parameter denoted as acceleration response modification factor (R_acc) was proposed to quantify this reduction/increase in PCA demands. Copyright © 2007 John Wiley & Sons, Ltd.     

单锚腿系泊系统动力计算的新方法

在Hamilton型拟变分原理体系下,建立了一种时间子域以三次和五次B样条函数插值的时间子域法,并将这种新方法用于单锚腿系泊系统的动力响应分析中。算例表明,新方法比传统的动力计算方法Wilson-θ法,在计算精度上有明显的优势,表明本方法能够用于计算单锚腿系泊系统的动力响应。     

A semi-analytical solution for random wave-induced soil response and seabed liquefaction in marine sediments

In this study, unlike most previous investigations for wave-induced soil response, a simple semi-analytical model for the random wave-induced soil response is established for an unsaturated seabed of finite thickness. Two different wave spectra, the B-M and JONSWAP spectra, are considered in the new model. The influence of random wave loading on the soil response is investigated by comparing with the corresponding representative regular wave results through a parametric study, which includes the effect of the degree of saturation, soil permeability, wave height, wave period and seabed thickness. The maximum liquefaction depth under the random waves is also examined. The difference on the soil response under the two random wave types, B-M and JONSWAP frequency spectra, is also discussed in the present work.     

江蓠中类菌孢素氨基酸(MAAs)成分分析及提取研究

利用高效液相色谱技术对江蓠(Gracilariaceae)中类菌孢素氨基酸(MAAs)进行了分析,并采用响应面分析法对MAAs物质的提取工艺进行优化研究。根据正交旋转组合试验设计原理,采用四因素五水平的响应面分析法,依据回归分析确定各因素的显著程度及最优工艺条件。结果表明,江蓠中MAAs的主要成分为porphyra-334;提取温度、浸提时间、甲醇浓度及液固比为影响MAAs物质提取的显著因素。通过多元二次回归拟合模型响应面分析,得到最优工艺条件:提取温度48.12℃,液固比34∶1,甲醇浓度25%,浸提时间1.85 h,优化条件下预测提取率为4.943 mg/g;试验值为4.893 mg/g,试验值与预测值吻合较好,响应面回归模型的准确性得到验证。     

Spatial pattern formation of a ratio-dependent predator—prey model

This paper presents a theoretical analysis of evolutionary process that involves organisms distribution and their interaction of spatially distributed population with diffusion in a Holling-III ratio-dependent predator--prey model, the sufficient conditions for diffusion-driven instability with Neumann boundary conditions are obtained. Furthermore, it presents novel numerical evidence of time evolution of patterns controlled by diffusion in the model, and finds that the model dynamics exhibits complex pattern replication, and the pattern formation depends on the choice of the initial conditions. The ideas in this paper may provide a better understanding of the pattern formation in ecosystems.     

Axial friction response of full-scale pipes in soft clays

The axial friction response of subsea pipelines in soft clays is a very important aspect for designers of subsea pipelines but the response is not well understood so far. There is a pressing need for the comprehension of the response. In this paper, model tests are performed using full-scale pipes coated with polyethylene (PE) to study the effects of the set-up period, the pipe diameter, the buried depth of the pipe, the shear strength of soft clays and the loading rate on the axial friction response of pipelines in soft clays. The variations of the axial friction coefficient are analyzed using the effective stress method based on model test results. The results show that the axial friction resistance increases with the increasing pipe diameter but the effect of the pipe diameter on the axial friction coefficient can be neglected. The ultimate axial resistance also increases with the increase of the buried depth of pipelines, the undrained shear strength of soft clays and the loading rate. The axial friction coefficient increases with the increasing loading rate. However, the axial friction coefficient decreases with the increasing buried depth. The method to determine the axial friction coefficient is developed by analyzing model test results, which considers the effects of the diameter, the buried depth, the undrained shear strength of soft clays and the loading rate. The study results not only extend the industry data base but also supply a basis to determine the axial friction coefficient of PE-coated pipes in soft clays for ocean engineering geological investigations.     

天然气水合物赋存区甲烷渗漏活动的地球化学响应特征

综述了天然气水合物赋存区甲烷渗漏活动的地球化学响应指标的研究进展,分析了应用单一指标识别甲烷渗漏活动各自所存在的问题,包括浅表层沉积物孔隙水中CH_4、SO_4~(2–)、Cl~–等离子浓度随深度的变化;浅层沉积物全岩W_(TOC)(W表示质量分数,TOC表示总有机碳)和W_(TS)(TS表示总硫)之间的相关性及比值;自生碳酸盐岩δ~(13)C和δ~(18)O;自生矿物重晶石、黄铁矿、自生石膏的δ~(34)S;有孔虫壳体和生物标志化合物的δ~(13)C等。结果表明孔隙水中的CH_4、SO4_~(2–)浓度及溶解无机碳的碳同位素组成可以用来识别目前正在发生的甲烷渗漏活动;而沉积物中的WTS、自生矿物的δ~(34)S、钡含量及其异常峰值和生物标志化合物的δ~(13)C等指标的联合使用可以更真实准确地反映地质历史时期天然气水合物赋存区的甲烷渗漏活动。因此,在实际研究过程中,可将孔隙水和沉积物两种介质的多种指标相结合。随着非传统稳定同位素(Fe、Ca、Mg等)和沉积物氧化还原敏感元素(Mo、V、U等)等研究的发展,甲烷渗漏活动地球化学响应指标的研究也将得到拓展,而多种地球化学指标的联合使用将为天然气水合物勘探及其形成分解过程识别研究提供重要的科学依据。