涡激振动实验中的流速增大装置研发与性能研究

拖曳水池中进行立管涡激振动实验时,为了保证采样时间长度,难以达到较高的Re数。流速增大装置可以在不提高拖车车速的情况下增大立管外的流速。利用这种流速增大装置还可实现流速分层流场中细长柔性立管涡激振动实验。经过对流速增大装置中的进流段曲线进行优选,发现Witozinsky曲线的总体性能最好。在对流速增大装置进行水池实验和数值模拟后,发现流速增大区域的流速增大倍数接近进流段收缩比,流速增大区域流场比较稳定、均匀,流速增大装置对其外的流场影响很小。此流速增大装置不但可应用于拖曳水池中的立管涡激振动实验,还可以应用于对流速要求较高的水下航行体的水池试验,如鱼雷、水下机器人等。     

Numerical benchmark studies on drag and lift coefficients of a marine riser at high Reynolds numbers

Numerical benchmark studies on drag and lift coefficients of a marine riser have been organized by the 27th ITTC Ocean Engineering Committee. The purpose of the studies was to benchmark the capabilities of CFD methods through quantitative comparisons and validation studies against the model test results of a circular cylinder by MARIN. Studies were focused on the drag crisis phenomenon for the stationary smooth cylinder in the critical Reynolds number regime. Eight organizations have participated in the studies by using RANS, DES and LES methods. An overview of the model test results, test cases, submissions and comparison results are presented in this paper. Conclusions and recommendations are made for future studies.     

基于损伤部位向量法的钢框架损伤识别研究

对损伤部位向量(DLV)法作了简单介绍,并用该方法对钢框架进行了损伤识别和损伤定位。该方法假定结构损伤前后为线性,对结构损伤前后柔度矩阵差进行奇异值分解,将奇异值为零所对应的向量,作为静荷载施加在无损结构的测点位置,则应力为零的单元为可能损伤的单元。对3种不同工况的钢框架进行了振动模态试验,用前3阶模态参数构造框架的柔度矩阵,按照DLV法对其进行了损伤识别,识别结果与已知损伤情况相一致。从测试自由度不完备、噪声和振型质量归一化系数这3个方面对识别效果进行了分析,结果表明:当损伤使结构动力特性有微小改变时,使用该方法不易定位损伤,应结合局部损伤识别方法进行判定;当损伤使结构动力特性有较大改变时,该方法能有效识别损伤的单元。DLV方法概念简单,理论明确,不受结构类型的限制,不需要结构的数学模型和模型缩聚或扩展技术,只需获得结构损伤前后的前几个低阶模态参数,即可识别结构一处或多处损伤,实际应用时可操作性强。     

某水工隧洞爆破震动对周边建筑物影响的试验分析

隧道开挖时的爆破震动对周边建筑物安全影响很大,但目前对不同爆破参数、周边建筑的距离与爆破开挖之间关系的研究成果不多,实际工程中也难以把握。以宁夏固原市某水工隧道工程为依托,采用现场试验的方法,对地表关键位置质点爆破振动频率与振动速度进行测试和分析。结果表明:(1)经测试发现房屋主振频率在10~60Hz间,而一般房屋建筑的频率均小于10Hz,说明此次试验中爆破震动不能与房屋产生共振。(2)对试验数据进行分析,并依据爆破震动规范安全振速标准进行判别,发现此次试验中土坯房的安全距离为160 m,一般砖房为60 m。研究结果可为隧道爆破的设计与施工提供理论依据,为类似隧道的爆破工程及解决由爆破引起的纠纷提供借鉴。     

Study of the train-induced vibration impact on a historic Bell Tower above two spatially overlapping metro lines

There is concern regarding the long-term vibration effects caused by metro trains on historic buildings. In this paper, the impact of metro train-induced vibrations on the Bell Tower in Xi’an above two spatially overlapping tunnels was studied.Metro Line 2 has been operational since 2011, and Line 6 is still under construction. To study and control the effect of micro vibrations on the Bell Tower, a metro train–track–tunnel–soil 3D dynamic FE model was developed. The vibration response generated by Line 2 was then predicted, and the influences of train speed on ground vibration were analysed. In addition, a detailed in situ measurement, which helped calibrate the numerical model and determine the dynamic behaviour of timber structures, was performed. Finally, the calibrated models and measured results were used to predict vibrations caused by road traffic and trains from two spatially overlapping metro lines. This was performed under different route schemes and train operation conditions.The results showed that installing steel spring floating slab tracks (FST) and decreasing train speeds had obvious effects on controlling the ground peak particle velocity (PPV). Simulated results from both the input impulse and output response generated by metro Line 2 matched well with actual measurements. If correct designs are employed, it is possible to resolve the vibration problem on historic buildings caused by metro trains.     

Dynamic performance analysis of a seismically isolated bridge under braking force

In order to study the dynamic performance of seismically isolated bridges under the most unfavorable loads in the longitudinal direction,a dynamic equation for vehicle braking in the longitudinal direction is established.A four or fiveorder Runge-Kutta method is adopted to obtain the time-history response of a wheel set under braking force.The quadratic discretization method is then used to transform this time-history into a braking and bending force time-history of a structural fixed node,and a dynamic response analysis of the seismically isolated bridge under the vehicle’s braking force is carried out using ANSYS,a universal finite element analysis software.According to the results,seismic isolation design results in a more rational distribution of braking force among piers;the influence of the initial braking velocity on the vehicle braking force is negligible;the location where the first wheel set leaves the bridge is the most unfavorable parking location;a seismic isolation bridge bearing constructed according to typical design methods enters into a yield stage under the braking force, while the shearing force at the bottom of the pier declines as the isolation period is extended;the design requirements can be met when the yield displacement of the seismic isolation bearing is less than 5 mm and the yield strength is greater than the braking force.     

重大建设工程基本自振周期估算方法探讨

在对规范和文献资料的研究和分析的基础上,本文探讨了(超)高层建筑、巨型储油罐、大跨桥梁工程等重大建设工程基本自振周期的估算方法.在工程场地地震安全性评价工作中,可采用本文提供的重大建设工程基本自振周期估算的公式.同时,本文为长周期地震动对工程结构作用的相关参数的合理确定提供了依据.     

Determining the location of buried plastic water pipes from measurements of ground surface vibration

‘Mapping the Underworld’ is a UK-based project, which aims to create a multi-sensor device that combines complementary technologies for remote buried utility service detection and location. One of the technologies to be incorporated in the device is low-frequency vibro-acoustics, and techniques for detecting buried infrastructure, in particular plastic water pipes, are being investigated. One of the proposed techniques involves excitation of the pipe at some known location with concurrent vibrational mapping of the ground surface in order to infer the location of the remainder of the pipe. In this paper, measurements made on a dedicated pipe rig are reported. Frequency response measurements relating vibrational velocity on the ground to the input excitation were acquired. Contour plots of the unwrapped phase revealed the location of the pipe to within 0.1-0.2 m. Magnitude contour plots revealed the excitation point and also the location of the pipe end. By examining the unwrapped phase gradients along a line above the pipe, it was possible to identify the wave-type within the pipe responsible for the ground surface vibration. Furthermore, changes in the ground surface phase speed computed using this method enabled the location of the end of the pipe to be confirmed.     

强夯振动加速度的量测及现场试验研究

结合延安新区强夯加固地基工程,进行强夯振动加速度测试现场试验。选取填方区场地,结合地形设计监测方案,以测试强夯波沿水平方向和斜坡的传播规律。在选定试验段的某级填方场地上布置多组加速度传感器,运用多个8通道24位高速采集卡记录强夯振动加速度在平面和斜坡的传播和衰减过程,探讨强夯振动波沿水平面和斜坡的传播规律以及能级对振动加速度的影响。结果表明:径向和竖向加速度值均随与夯点距离的增大而减小;在与夯击点距离相同处,强夯振动波沿水平方向传播的径向和竖向加速度值要大于沿斜坡方向;随着能级的增大,强夯产生的夯击波增强,在与夯击点相同距离处产生的径向和竖向加速度均明显增大。