Evaluation of pullout load capacity of suction caissons in sand using a three-dimensional displacement approach

An investigation was conducted to obtain analytical solutions for the pullout behavior of a suction caisson undergoing inclined loads in sand. The inclined load is transformed into an equivalent load system in which the vertical, horizontal, and moment loads are applied on the center of the lid of the suction caisson. The vertical and lateral stiffness coefficients along the skirt of the suction caisson in sands are presented using the new three-dimensional elastic solutions taking into account the nonhomogeneous and nonlinear properties of the sand. The vertical, lateral, and rocking stiffness coefficients on the base of the suction caisson are presented considering the solutions of a hollow rigid cylindrical punch acting on the surface of a soil. The yield, pullout, and failure for sands with the nonhomogeneous and nonlinear characteristics are taken into consideration. The effects of the load inclination, the loading depth, and the aspect ratio on the pullout load capacity of the suction caisson are presented. Behaviour of the suction caisson in sand prior to failure is clarified from the relationship between tensile load, displacement, and rotation and that between depth, vertical pressure, and lateral pressure.     

Vertical dynamic impedance of pile considering the dynamic stress diffusion effect of pile end soil

A new analytical model is presented to analyze the dynamic stress diffusion effect of pile end soil on the vertical dynamic impedance of the pile. The surrounding soil of the pile is modeled by using the plane strain model and the pile is simulated by using one-dimensional elastic theory. Finite soil layers below the pile end are modeled as conical fictitious soil pile with stress diffusion angle which reflects the dynamic stress diffusion effect of pile end soil. By means of the Laplace transform and impedance function transfer method, the analytical solution of the vertical dynamic impedance at the pile head in frequency domain is yielded. Then, a comparison with other models is performed to verify the conical fictitious soil pile model. Finally, based on the proposed solution, the selected numerical results are compared to analyze the influence of dynamic stress diffusion effect for different design parameters of the soil-pile system on the vertical dynamic impedance at the pile head.     

Land Cover Status in the Koshi River Basin,Central Himalayas

The Koshi River Basin is in the middle of the Himalayas, a tributary of the Ganges River and a very important cross-border watershed. Across the basin there are large changes in altitude, habitat complexity, ecosystem integrity, land cover diversity and regional difference and this area is sensitive to global climate change. Based on Landsat TM images, vegetation mapping, field investigations and 3S technology, we compiled high-precision land cover data for the Koshi River Basin and analyzed current land cover characteristics. We found that from source to downstream, land cover in the Koshi River Basin in 2010 was composed of water body (glacier), bare land, sparse vegetation, grassland, wetland, shrubland, forest, cropland, water body (river or lake) and built-up areas. Among them, grassland, forest, bare land and cropland are the main types, accounting for 25.83%, 21.19%, 19.31% and 15.09% of the basin’s area respectively. The composition and structure of the Koshi River Basin land cover types are different between southern and northern slopes. The north slope is dominated by grassland, bare land and glacier; forest, bare land and glacier are mainly found on northern slopes. Northern slopes contain nearly seven times more grassland than southern slopes; while 97.13% of forest is located on southern slopes. Grassland area on northern slope is 6.67 times than on southern slope. The vertical distribution of major land cover types has obvious zonal characteristics. Land cover types from low to high altitudes are cropland, forest, Shrubland and mixed cropland, grassland, sparse vegetation, bare land and water bodies. These results provide a scientific basis for the study of land use and cover change in a critical region and will inform ecosystem protection, sustainability and management in this and other alpine transboundary basins.     

中近磁尾等离子体片统计特性研究

本文使用Cluster-C1卫星的CIS仪器和FGM仪器测量得到的质子通量数据和计算的β数据,判断Cluster卫星在地球磁尾不同位置位于等离子体片内的概率.使用2001—2004年7—11月的Cluster-C1数据,分别在行星际磁场南向和北向时,得出X-10RE区域内卫星位于等离子体片的概率在Y-Dz平面的分布图(Dz是卫星到中性片的距离).通过对比行星际磁场南向和北向时的卫星位于等离子体片的概率的分布图,我们发现等离子体片在行星际磁场南向时比在行星际磁场北向时要薄,并且这个效应在磁尾晨昏两侧比在午夜附近明显,同时我们还发现等离子体片在晨侧比在昏侧厚.     

铅垂断层向错引起的地表重力变化

利用直立长方体组合模型以及坐标旋转理论,对铅垂断层向错引起的重力变化进行数值模拟,分别计算深度为1、5、10 km的铅垂断层在单一方向上、两个方向上向错引起的地面重力变化。结果表明,当断层在单一方向产生向错时,以左端点为基点的W1、W2向错引起的地面重力变化场均呈现以断层为轴线的对称分布|以中点为基点的W3向错引起的地面重力变化场构成四象限反对称分布。当断层在两个方向上同时产生向错时,以左端点为基点的W1W2向错引起的地面重力变化场呈现以断层为轴线的对称分布,整体显示W2向错起主导作用|以中点为基点的W2W3向错引起的地面重力变化场呈现非对称分布,整体也显示出W2向错起主导作用,断层附近的扭错现象为W3向错的作用。随着断层深度的增加,断层向错引起的地面重力变化值递减,但影响范围逐渐扩大。     

基于水准剖面的山西断陷带现今活动性研究

根据跨山西断陷带的水准剖面观测资料,计算其垂直形变量和垂直形变速率,研究其现今垂直活动性。2006年以来的垂直形变揭示,山西断陷带东北段延怀盆地和蔚县盆地呈掀斜上升活动,北段阳原盆地和大同盆地以下降活动为主,晋中盆地为上下波动,临汾盆地呈现上升活动。2013年山西断陷带活动出现转折性变化,蔚县盆地大幅度下降,大同盆地、代县-定襄盆地、晋中盆地和临汾盆地均呈现不同程度的上升。     

竖向地震动对大跨度高断面Y形柱地铁车站地震响应分析研究

以北京地铁6号线新华大街站公共区Y型柱地铁车站为工程背景,利用FLAC3D有限差分程序数值模拟分析,研究超浅埋大跨度、高断面、Y形柱地铁车站结构分别在仅输入水平向地震动和同时输入水平向与竖向地震动情况下的地震响应特性。结果表明:(1)与仅输入单向地震动相比,双向地震动耦合作用下车站各测点的峰值加速度和应力值均增大,而相对水平位移减小,且随着输入地震动强度的增加,竖向地震动影响率呈递减趋势;(2)双向地震动作用下,同一工况Y形柱叉支处各测点的竖向位移明显增大,且各测点的竖向位移值较为均匀,而单向水平地震动作用下各测点竖向位移差异较大;(3)与单向水平地震动相比,竖向地震动的输入对各测点间的水平方向地震动特性规律影响较小。     

考虑挤土效应时楔形桩纵向振动阻抗研究

基于复刚度传递多圈层平面应变模型,研究考虑桩周土挤土效应时成层地基中楔形桩的纵向振动问题。首先根据桩周土体的纵向成层情况并考虑楔形桩的变截面特性,将桩土系统沿纵向划分为有限个微元段,对每个微元段的桩周土体建立复刚度传递多圈层平面应变模型,并通过剪切复刚度递推方法求得桩周土作用在桩身的剪切复刚度;然后将求得的剪切复刚度代入桩身纵向振动控制方程,运用Laplace变换技术和阻抗函数递推方法,推导得到考虑桩周土挤土效应时成层地基中楔形桩纵向振动时桩顶复阻抗的解析解;最后,采用参数研究方法在低频范围内分析挤土效应对桩顶复阻抗的影响及其规律。     

Seismic design and testing of the bottom vertical boundary elements in steel plate shear walls. Part 1: design methodology

This research investigates the seismic design method and the cyclic inelastic behavior of the bottom column, also called the vertical boundary element (VBE), in steel plate shear walls (SPSWs). This study consists of two parts. This Part 1 paper discusses the anticipated pushover responses for properly designed SPSWs and the possible inelastic responses of the bottom VBE at various levels of inter‐story drift. Considering both the tension field action of the infill panel and the sway action of the boundary frame, this study develops a simplified method to compute the flexural and shear demands in the bottom VBE. Based on the superposition method, this approach considers various plastic hinge forming locations at different levels of inter‐story drift. One of the key performance‐based design objectives is to ensure that the top ends of the bottom VBEs remain elastic when the SPSWs are subjected to the maximum considered earthquake. This paper presents the comprehensive design procedures for the bottom VBE. Furthermore, this study conducted cyclic performance evaluation tests of three full‐scale two‐story SPSWs at the Taiwan National Center for Research on Earthquake Engineering in 2011 to validate the effectiveness of the proposed design methods. The experimental program, cyclic inelastic responses of the SPSWs and bottom VBEs, and numerical simulations are presented in Part 2. Copyright © 2014 John Wiley & Sons, Ltd.     

A climatic dataset of ocean vertical turbulent mixing coefficient based on real energy sources

Using data on wind stress, significant height of combined wind waves and swell, potential temperature, salinity and seawater velocity, as well as objectively-analyzed in situ temperature and salinity, we established a global ocean dataset of calculated wind- and tide-induced vertical turbulent mixing coefficients. We then examined energy conservation of ocean vertical mixing from the point of view of ocean wind energy inputs, gravitational potential energy change due to mixing (with and without artificially limiting themixing coefficient), and K-theory vertical turbulent parameterization schemes regardless of energy inputs. Our research showed that calculating the mixing coefficient with average data and artificial limiting the mixing coefficient can cause a remarkable lack of energy conservation, with energy losses of up to 90% and changes in the energy oscillation period. The data also show that wind can introduce a huge amount of energy into the upper layers of the Southern Ocean, and that tidesdo so in regions around underwater mountains. We argue that it is necessary to take wind and tidal energy inputs into account forlong-term ocean climate numerical simulations. We believe that using this ocean vertical turbulent mixing coefficient climatic dataset is a fast and efficient method to maintain the ocean energy balance in ocean modeling research.