Effects of Young's modulus on fault displacement

Elastic crack models predict a linear relationship between displacement (u) and rupture (trace) length (L) during slip in a fault zone. Attempts to find universal-scaling laws for L/u, however, have generally failed. Here I propose that these attempts have failed because they do not take into account the changes in the mechanical properties, in particular Young's modulus (stiffness), of the fault zone as it evolves. I propose that Young's modulus affects fault displacement both spatially and temporally: spatially when the trace of a fault at a given time dissects host rocks of different stiffnesses, and temporally when the stiffness of the fault zone itself changes. During the evolution of an active fault zone, the effective Young's modulus of its damage zone and fault core normally decreases, and so does the L/u ratio of the fault. By contrast, during inactive periods sealing and healing of the damage zone and core may increase the stiffness, hence the L/u ratio in subsequent slips. This model predicts that not only will the scaling of L/u within a given fault population vary in space and time, but also that of individual faults. To cite this article: A. Gudmundsson, C. R. Geoscience 336 (2004).     

基于物方影像匹配和概率松弛的断面自动提取

提出了基于物方影像匹配的断面提取,为了提高匹配的可靠性,引入了概率松弛法,最终获得了高精度的断面.     

基于通量均衡基准的地壳垂直形变场分析模型

根据全球通量均衡假说建立了地壳垂直形变场的分析模型，在球面近似下求得了该模型的球谐函数级数解并拟合了两个不同区域的地壳垂直形变场，编绘了等值线图，继而在密切平面坐标系下导出了该模型的Fourier级数解。结果表明，该方法不仅具有几何意义，而且具有一定的地球动力学意义。     

Slow mass movement in the Kangchenjunga area, eastern Nepal Himalaya

Abstract   The rates of the accumulated and continuous displacement of solifluction lobes in the Kangchenjunga area, eastern Nepal Himalaya, were determined using glass fiber tubes and a strain probe. Ground temperature, precipitation and soil moisture were monitored at two sites, whose altitude differed by approximately 100 m, to understand the solifluction process. The average movement rate of the glass fiber tubes on a 31° slope at altitudes of 5412–5414 m a.s.l. was approximately 11 mm/year, being almost threefold greater than that observed on a 22° slope at 5322–5325 ma.s.l. There was no significant difference in the depth of displacement at these sites. The continuous displacement measurement near the ground surface at 5414 m showed permanent downslope movement from early July. Such movement may be attributed to additional moisture supply during the monsoon season. The amplitude of the displacement cycle was highest at the ground surface, and decreased to virtually zero at and below 20 cm in depth. Probable factors leading to the relatively slow rates of downslope displacement at the surface and depth at the studied altitudes are the lack of concurrence of the freeze–thaw cycles and the high moisture condition in the soil, and the low moisture retention capacity of the soil because of steep slopes and superficial desiccation. The rate of displacement may be more pronounced at altitudes above 5600 m because of the freeze–thaw cycles during the summer season.     

Dynamic theory of rigid-plasticity

This paper deals with an analysis method for the response and motion of soil-like rigid-plastic bodies under seismic loading conditions. A continuity condition to determine the acceleration distribution within the rigid-plastic body when the failure occurs during seismic motions is proposed. Combining this continuity condition of acceleration and the ‘Generalized Limit Equilibrium Method (GLEM)’, the responses of the earth structure during seismic motions as well as the permanent displacements can be obtained, where GLEM is one of the limit equilibrium methods proposed by the authors for static problems and providing the approximate solution for Kötter's equation. The theoretical formulation of the method, the illustrative examples, and some comparisons between the analytical and experimental results are demonstrated.     

Real-time simulation of ground displacement by digital accelerograph record

Introduction The observation records of strong ground motion previously, on the one hand, supplied basicdata both to research on earthquake engineering and to constitute the criterion of aseismatic de-signing of all project structures; on the other hand, it provided important information for the re-search on the process of epicenter burst in seismology. With the development of research on strongground motion observation, especially the development of the new generation accelerograph,which…     

The impact of epistemic uncertainty on an earthquake loss model

Models capable of estimating losses in future earthquakes are of fundamental importance for emergency planners, for the insurance and reinsurance industries, and for code drafters. Constructing a loss model for a city, region or country involves compiling databases of earthquake activity, ground conditions, attenuation equations, building stock and infrastructure exposure, and vulnerability characteristics of the exposed inventory, all of which have large associated uncertainties. Many of these uncertainties can be classified as epistemic, implying—at least in theory—that they can be reduced by acquiring additional data or improved understanding of the physical processes. The effort and cost involved in refining the definition of each component of a loss model can be very large, for which reason it is useful to identify the relative impact on the calculated losses due to variations in these components. A mechanically sound displacement‐based approach to loss estimation is applied to a test case of buildings along the northern side of the Sea of Marmara in Turkey. Systematic variations of the parameters defining the demand (ground motion) and the capacity (vulnerability) are used to identify the relative impacts on the resulting losses, from which it is found that the influence of the epistemic uncertainty in the capacity is larger than that of the demand for a single earthquake scenario. Thus, the importance of earthquake loss models which allow the capacity parameters to be customized to the study area under consideration is highlighted. Copyright © 2005 John Wiley & Sons, Ltd.     

华蓥山隧道岩溶发育强度垂直分带

论述了华蓥山隧道的岩溶发育特征,根据岩溶发育强度的划分依据和划分标准,结合岩溶发育的历史,采用类比判别法、主因素判别法和综合判别法对岩溶发育强度作了垂直分带,据此预测的溶洞规模与实际情况吻合。     

Numerical Modeling of Basin-Range Tectonics Related to Continent-Continent Collision

Continent-continent collision is the most important driving mechanism for the occurrence of various geological processes in the continental lithosphere. How to recognize and determine continent-continent collision,especially its four-dimensional temporal-spatial evolution, is a subject that geological communities have long been concerned about and studied. Continent-continent collision is mainly manifested by strong underthrnsting (subduction) of the underlying block along an intracontinental subduction zone and continuous obduction (thrusting propagation) of the overlying block along the intracontinental subduction zone, the occurrence of a basin-range tectonic framework in a direction perpendicular to the subduction zone and the flexure and disruption of the Moho. On the basis of numerical modeling, the authors discuss in detail the couplings between various amounts and rates of displacement caused by basin subsidence, mountain uplift and Moho updoming and downflexure during obduction (thrusting propagation) and subduction and the migration pattern of basin centers. They are probably indications or criteria for judgment or determination of continent-continent collision.