郑州市市区风环境模拟研究

城市风环境是城市微气候研究的一个重要方向,对分析城市热岛效应、空气流通等具有重要意义。本文以郑州市市区为例,使用1971—2018年气象观测数据、2018年建筑分布数据（OSM）和2016年资源三号卫星数据作为数据源,通过运用气象学和GIS技术结合的方法,探究潜在通风廊道,科学量化城市形态对风环境的影响。研究首先借助WindNinja软件,对城市背景风环境进行模拟分析,该计算方法提高了风道定位的精度。然后利用卫星遥感数据制作了数字高程模型（DSM）,结合OSM计算下垫面地表粗糙度。进一步借助ArcGIS软件,利用最小成本路径法（LCP）确定城市潜在通风廊道的位置。结果表明：① 郑州市近年来平均风速缓慢下降,平均每10年下降0.26 m/s;全年主导风向东北风进入城市后受城市形态影响在京广铁路线附近以西逐渐转为东北偏东风,其中在京广快速路以东风速较高,在京广快速路以西风速较低;② 金水区西部、中原区、二七区以及管城区的地表粗糙度较高,通风环境较差;金水区东部和惠济区的地表粗糙度较低,通风环境较好;③根据盛行风向模拟的潜在通风廊道,其共同特点是趋向于低粗糙度的地区。     

浅析张集矿立井地面预注浆堵水效果

介绍了张集矿立井基岩段水文地质和基岩地面预注浆的有关情况。根据井简实测资料,分析基岩裂隙的发育规律、裂隙层界面的浆波充填情况、实际浆液有效扩散半径及堵水效果。认为：立井基岩地面预注浆,不仅能成功地起到堵水的自的．从而缩短工期、降低造价、提高质量,而且还有利于井筒安全揭穿突出谋层,达到安全施工。     

地下水位下降对井壁破坏的影响分析

在用“２Ｄ σ”软件对所建模型进行数值计算的基础上, 分析了因采煤引起淮北矿区下部含水层水位下降而对井壁产生的影响。其表现为： 下部含水层水位下降将引起地层压缩沉降; 地层与井壁间产生附加应力, 并在基岩下部产生应力为零的中性点; 轴向应力由小变大; 当第一含水层和下部含水层同时有水位下降时, 也有类似的规律。计算结果与淮北诸矿井壁变形位置及变化状况基本相符, 因此在此基础上进行的井筒优化设计具有实际指导意义     

Limestone Dissolution Processes in Beke Doline Aggtelek National Park,Hungary

Aggtelek National Park, Hungary, is a limestone karst upland characterized by karren, dolines and river caves. For a period of two years, climatic and carbonate dissolution variables were monitored at four depths in a 7·5 m shaft through the soil fill in the floor of a typical large (150 m diameter) doline. Results are compared to other monitoring stations in the shallow soils on side slopes. Runoff and groundwater flow are focused into the base of the doline soil fill, where moisture is maintained at 70–90 per cent field capacity and temperatures permit year-round production of soil CO₂. The capacity to dissolve calcite (limestone) ranges from c. 3 g m⁻² per year beneath thin soils on the driest slopes to 17–30 g m⁻² per year in the top 1–2 m of doline fill and at its base 5–7 m below. © 1997 John Wiley & Sons, Ltd.     

抗震巷道内空调通风系统的设计与实现

为解决传统巷道内空调通风系统存在的信息采集准确率较低,性能较差、抗震巷道环境难以改善等问题,提出设计一种新的抗震巷道内空调通风系统。先将系统的整体架构划分为采集层、控制层和监管层三部分,以主控制器为核心,对系统各执行组件做出正确地判断,并对各组件进行统一化控制,完成系统的硬件设计;创建中心服务器信息处理过程,设定风机运行指令,主动采集风速等环境信息,获取实际环境状态,将设定值与实际值进行对比,依据对比结果判断风机是否正常运行,实现系统软件功能的开发。实验结果表明,在不同的震级条件下,该系统能够有效改善抗震巷道环境,系统的信息采集准确率高达85%左右,充分验证了该系统的优越性。     

Experimental analysis on the risk of vortex ventilation and the free surface ventilation of marine propellers

The paper presents a discussion of the ventilation inception and air drawing prediction of ships propellers, aiming to predict under what conditions ventilation will happen, and the actual physical mechanism of the ventilation.Three different types of ventilation inception mechanisms are included in our discussion: free surface vortex ventilation, ventilation by sucking down the free surface without forming a vortex as well as ventilation by propeller coming out of the water. Ventilation prediction is based on a series of model tests, where the propeller is tested in different levels of intermittent ventilation. The use of underwater video gives a visual understanding of the ventilation phenomena.Ventilation by vortex formation has analogies with other phenomena, such as the inlet vortex in pump sumps, ground vortex at the inlet of the aircraft engines and the Propeller Hull Vortex Cavitation (PHVC). The paper includes comparison between Propeller Hull Vortex Cavitation (PHVC) and Propeller Free Surface Vortex Ventilation (PFSVV) as well as comparison between PFSVV and vortex formations of aero engines during high power operation near a solid surface.Experimental data based on several different model tests shows the boundary between the vortex forming, non-vortex forming and free surface ventilation flow regimes. For comparison the following parameters, which determined the intensity of the hydrodynamic interaction between the propeller and free surface have been used: propeller load coefficient c_T, tip clearance ratio c/D, propeller submergence ratio h/R, ambient velocity V_i and flow cavitation/ventilation number σ_cav/σ_vent.     

Field study of set-up effect in open-ended PHC pipe piles

Large-scale field tests were conducted to study set-up effect in open-ended prestressed high-strength concrete pipe piles jacked into stratified soil. Four open-ended prestressed high-strength concrete pipe piles with 13 and 18 m in embedment depth were fully instrumented with fiber Bragg grating sensors and installed. Several restrike dynamic tests were performed on each test pile, with the time interval from 21.5 to 284 hours after installation. Static loading tests (SLTs) were later performed on each test pile at 408 hours after installation to substantiate the dynamic tests. Changes with time in pile bearing capacity and in the shaft and toe resistances were studied based on the results of the pile tests. The development of shaft resistance set-up in different layers was studied in particular. It was found that set-up effect in the shaft resistance is significant and the toe resistance increment was minor. The overall set-up factor of total bearing capacity was found to range from 0.09 to 0.53, and the set-up effect of friction pile is much larger than the end bearing pile. More significant set-up in shaft resistance was observed in fill and alluvium layer. The dimensionless set-up factor A for shaft resistance in marine deposits ranges from 0.5 to 1.43, and it contributes the most to the shaft resistance as the shaft resistance in marine deposits is higher.     

End Bearing Capacity of Drilled Shafts in Sand: A Numerical Approach

In this paper, a modeling procedure is carried out to numerically analyze the end bearing capacity of drilled shafts in sand. The Mohr–Coulomb elastic plastic constitutive law with stress dependent elastic parameters is used for all numerical analyses performed in this study. The numerical results are compared with the available experimental equations. It is seen that numerical results are in good agreement with experimental equations. The variation of the end bearing capacity of drilled shafts versus embedment depth is also studied. Numerical results show that with increase in pile embedment depth, the end bearing capacity increases. However, the rate of increase becomes smaller as the pile embedment depth increases. Also, numerical analyses show that, for equal settlement, the end bearing decreases with increase in the pile diameter. Finally, a sensitivity analysis is performed to obtain the separate effect of each sand parameter on the end bearing capacity of drilled shafts, and the parameters that are most influential are identified.     

广西气候与建筑设计

对广西建筑设计所涉及的气候参数进行了计算和分析,给出了南宁、桂林的基本风压、采暖通风和空调室外气象参数和建筑采光系数,为建筑部门提供了科学依据。     

基于自平衡试桩法大直径嵌岩桩尺寸效应分析

基于自平衡测试技术,通过现场的原位测试方法,对大直径嵌岩桩的尺寸效应进行了研究,内容包括桩径尺寸和嵌岩深度变化以及桩端阻力尺寸效应的影响分析等。从测试结果来看,嵌岩桩也存在一定程度的尺寸效应现象。当其他条件一定时,随着桩径的增大,桩侧阻力存在着减小现象;在同一种岩层的情况下,随着嵌岩深度的增大,桩侧阻力发挥也并不相同,嵌岩深度越大,桩侧阻力发挥也越小。实测结果表明,桩周岩石的特性变化对桩侧阻力影响最大,岩石抗压强度越高,桩侧阻力也越大。此外,桩径的变化对桩端阻力的影响更为明显。因此,在大直径嵌岩桩的设计中应注意尺寸效应对桩基承载力的影响。