Torsional vibrations of elastic foundation on saturated media

A comprehensive analytical solution is developed to examine the torsional vibration of an elastic foundation on a semi-infinite saturated elastic medium for the first time. First, the governing equations of saturated media are solved by use of Hankel transform techniques. Then, based on the assumption that the contact between the foundation and the half-space is perfectly bonded, this dynamic mixed boundary-value problem can lead to dual integral equations, which are further reduced to the standard Fredholm integral equations of the second kind and solved by numerical procedures. Numerical examples are given at the end of the paper. The numerical results indicate that the response of the elastic foundation strongly depends on the material and geometrical properties of both the saturated soil-foundation system and the load acting on the foundation. In most of the cases, the dynamic behavior of an elastic foundation on saturated media significantly differs from that of a rigid plate bearing on the elastic half-space.     

Viscous damping formulation and high frequency motion propagation in non-linear site response analysis

Non-linear time domain site response analysis is widely used in evaluating local soil effects on propagated ground motion. This approach has generally provided good estimates of field behavior at longer periods but has shortcomings at relatively shorter periods. Viscous damping is commonly employed in the equation of motion to capture damping at very small strains and employs an approximation of Rayleigh damping using the first natural mode only. This paper introduces a new formulation for the viscous damping using the full Rayleigh damping. The new formulation represents more accurately wave propagation for soil columns greater than 50 m thick and improves non-linear site response analysis at shorter periods. The proposed formulation allows the use of frequency dependent viscous damping. Several examples, including a field case history at Treasure Island, California, demonstrate the significant improvement in computed surface response using the new formulation.     

《CT理论与应用研究》杂志新刊标和地幔速度模型的说明

在《ＣＴ理论与应用研究》杂志１９９４~２００１年本杂志“刊标”的基础上,在其上方增加了象征三维体视学成像的三角形四面体的透视图;该刊标的右下侧为医学断面成像扫描仪(包括各种Ｘ－ＣＴ机与核磁共振ＭＲＩ扫描仪等);其左下侧为三维地幔速度模型和地球核的示意图,切出有两个地幔剖面,表示纵波速度二维变化的剖面。该速度剖面系根据赵大鹏教授的理论和计算方法,按照地球上的两个大圆弧做计算和绘制的彩色图,排在本期封４:第一大圆弧,从北极经西巴基斯坦(２８°Ｎ, ６４°Ｅ)到马尔代夫群岛(３°Ｎ,７３°Ｅ);第二大圆弧从马尔代夫群岛点(３°Ｎ,７３°Ｅ)连接巴布新几内亚之南点(１２°Ｓ,１５０°Ｅ),来计算两剖面速度分布并作图的结果,其具体分布参见封４的两条彩色剖面和相应的地理位置图。由于赵教授这篇论文[１]在中国国内只有很少数图书馆收藏,在Ｅｌｓｅｖｉｅｒ Ｓｃｉｅｎｃｅ的ＥＰＳＬ网站上一般人只能查到摘要,本刊对于该地幔速度模型的制作方法和所用数据资料,该模型的优越性和特征进行了叙述,他所用的地震事件数目,多达７１２８个;用于层析反演成像的震相到时数多到近一百万条。该速度如下的特点:在所采用的速度结构中,包含用几个复杂形状的地质速度界面,如莫霍面,以及下沉板块的分界     

中国西南及邻区上地幔P波三维速度结构/

利用ISC报告以及中国和NEIC基本测震台网报告中的80974条P波初至到时资料（地震数为7053，台站数为165，且地震和台站都分布在研究区内），对中国西南及邻区（北纬10～36、东经70～110）的深至400km的上地幔三维速度结构进行了研究，分辨率达22．初步结果表明:①研究区速度的横向不均匀性，虽随深度增加而减弱，但至400km深度时仍很明显；②在北纬16和24的纵剖面上，可以看到与印度板块向东和欧亚板块相碰撞挤压相对应的速度结构，以及印度板块与欧亚板块速度结构的差异．在东经90的纵剖面上，与印度板块向北俯冲到欧亚板块（青藏高原）之下相对应的速度结构也比较明显；③在90ｋｍ深度的横剖面上，由缅甸的密支那至越南的洞海的低速条带，可能与红河断裂带有关；④ 提出并使用了能够更为准确直观地描述分辨率好坏的图示方法．      

中朝地台东北缘地区的地震层析成像

根据中朝地台东北缘地区 (东经 1 1 7°0 0′— 1 2 6°0 0′ ,北纬 36°0 0′— 44°0 0′) 1 980— 1 997年的 380 0 0余条P波走时数据 ,利用正交投影法重建了该区地壳和上地幔的三维速度结构 .通过分析及同人工地震测深剖面的详细对比 ,证明了成像结果的可靠性 .结果表明 :中朝地台东北缘地区地壳上地幔介质存在显著的横向不均匀性 ,直至 1 2 0km深度处依然明显 ;地壳上部的速度图像清楚地反映了不同岩石单元的分布与该区不同性质的基岩分布基本吻合 ;从上、中地壳的速度图像中发现了研究区存在海城、朝阳、义县、丹东南、唐山等几个低速异常区(即速度逆反层区 ) ,其中海城、唐山、朝阳等地区的壳内低速层已由深地震测深资料所证实 ;研究区陆地发生的几次强震均发生于壳内低速层上方的高速脆性介质内 ,而渤海发生的强震 ,此现象不明显 ,但都发生于横向介质速度显著突变的位置 ;在地壳不同深度上发现了普兰店至山海关横跨渤海的北西向低速异常带 ;地震层析二维速度图像与深地震测深资料的对比表明 ,研究区利用地震层析成像技术 ,在一定条件下可以获得与人工地震测深相似的效果     

中国大陆及邻近海域的Rayleigh波群速度分布

利用Rayleigh波群速度资料反演得到中国大陆及其临近海域的(70°E-145°E,10°N-55°N)15-120s周期的群速度分布图像. 塔里木盆地在15s处清楚地显示为低速,在16-33s左右没有显示,但在36-5s显示为高速,说明塔里木盆地有较深的根. 青藏高原块体是44s至120s图像中最为突出的低速块体,南面与印度板块的分界线以及与北面的塔里木盆地、柴达木盆地的分界清晰,其块体中西部的速度低于东部. 泰国清迈附近存在一尺度为1000km左右的低速带,可能是青藏高原块体的物质向东南方向迁移造成上地幔物质上涌的结果. 南北地震带表现为强烈的速度梯度带,西面为低速,东面为高速. 中国南海的中央、日本海中央、菲律宾海表现为海洋性地壳. 菲律宾海的图像与地形及地震带完全吻合. 环绕菲律宾海及日本海存在400km左右宽的低速带,可能是岩浆活动带.     

Development of site-specific design ground motions in Western and Eastern North America

This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.

For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

单层柱面网壳弹塑性地震反应特征

本文对网壳结构的弹塑性抗震性能进行了探讨。根据结构弹性有限元理论，结合网壳结构受力特点，推导出网壳结构单元的弹塑性矩阵表达式。然后对单层柱面网壳结构的弹塑性地震反应进行了具体分析，给出了节点位移和杆件应力变化规律，并讨论了矢跨比变化对网壳弹塑性性能的影响，从而揭示出这类网壳的弹塑性地震反应特点。     

结构动力反应分析的三阶显式方法

本通过对传统动力反应分析方法的总结，阐明了建立隐式和显式方法的一般思路及数学本质，提出了使用系统位移反向向量三阶导数的隐工和实用显式积分方法－3阶显式方法，分析了该显式方法的精度和稳定性，并对建立更高阶隐式和显式方法以及方法的精度和稳定性作了初步讨论。最后，通过算例对本方法、献[1]方法和经典的常平均加速度法（隐式方法、视为精确解）的精度和稳定性进行了比较分析。结果表明，本方法具有明显的优点。