From 2D TO 3D Through Modelling Based On A Single Image

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.     

多源遥感影像误匹配点剔除的粗糙模糊C-均值方法

简要概述了遥感影像匹配中,误匹配点剔除的常用方法.对SIFT特征描述子生成及其匹配、粗糙模糊C-均值方法聚类分析的原理方法进行了详细论述.针对SIFT方法匹配出的大量点对,将不同时相,不同传感器、不同分辨率影像广义划分为同分辨率和不同分辨率.基于同分辨率影像匹配点对问连线具有相同的距离及斜率、不同分辨率影像匹配点对间连线的延长线交于一点的几何约束条件,利用粗糙模糊C-均值模型聚类分析方法对点对快速剔除误匹配点后,对剔除的结果利用最小二乘方法进行精匹配,结果达到亚像素.最后,通过对不同时相、不同分辨率、不同传感器的多源遥感影像实验分析验证了该方法的适用性、可靠性及精确性.     

黄河下游断面形态与水沙输移关系及数学模拟方法

以前人对黄河下游的实测资料分析为基础,本文讨论断面形态与来水来沙关系、断面形态对输水输沙的影响,并根据实测资料,提出黄河下游弯段与直段断面冲淤变化的两种模式,建立了主流摆动及坍岸影响断面形态变化以及纵向冲淤量在断面的分布两种数学模拟方法。     

Numerical Calculation of Equivalent Cell Permeability Tensors for General Quadrilateral Control Volumes

A new method for upscaling fine scale permeability fields to general quadrilateral-shaped coarse cells is presented. The procedure, referred to as the conforming scale up method, applies a triangle-based finite element technique, capable of accurately resolving both the coarse cell geometry and the subgrid heterogeneity, to the solution of the local fine scale problem. An appropriate averaging of this solution provides the equivalent permeability tensor for the coarse scale quadrilateral cell. The general level of accuracy of the technique is demonstrated through application to a number of flow problems. The real strength of the conforming scale up method is demonstrated when the method is applied in conjunction with a flow-based gridding technique. In this case, the approach is shown to provide results that are significantly more accurate than those obtained using standard techniques.     

非规则测区三维地震偏移的边界吸收层法

对不规则测区的地震资料直接进行三维偏移不仅可减少计算量,而且可提高偏移剖面的质量. 本文在单程波方程中增加了一项简单的阻尼因子,其作用如同在实际不规则测区的外部有一个薄吸收层. 因为波穿越这个薄层时,波场值迅速衰减,所以偏移时把吸收层外边界处的波场值取为零所产生的反射非常微弱. 又因为不规则测区零边界条件偏移程序极易编制,所以就可以实现对不规则测区的地震资料直接进行三维偏移. 通过对实际地震资料的处理,说明了该方法的有效性.     

近几十年来西北江三角洲网河区顶点的河相关系

据西北江三角洲网河区顶点马口、三水两水文站1959－1988年的实测大断面、流量、流速和水位资料，采用Leopold的水力几何形态关系建立断面河相关系，探讨两水文观测断面的河相关系特征、年际变化及河相关系的差异。河相关系表明，西北江三角洲的断面水力几何形态指数β1值相对较小，而β3值相对较大，代表了珠江特有的丰水少沙河流的河相关系。     

两种方法在地下水位估值中的应用

对于许多区域水资源问题,用数值方法进行潜水水流模拟时,需要给出每个节点上地下水位值。本文首先简单介绍了趋势面方法,然后着重阐述了泛克里格方法的基本原理及它们在地下水位估值中的应用,通过比较两种方法的计算结果可以得出泛克里格方法是进行地下水位估值的空间最优估计方法。     

考虑几何非线性的强夯流固动力耦合分析

针对强夯法加固地基机理的流固动力耦合分析问题,本文考虑土体的几何非线性,建立土体非线性动力平衡方程和整体流固动力耦合方程,给出土体非线性动力平衡方程的迭代计算格式和流固动力耦合方程的解耦计算方法,并对一具体算例进行了数值分析,得到了地基位移、应力等在强夯作用下的变化规律和在空间上的分布特征,为精确模拟分析强夯加固机理提供了有效途径。     

The role of sediment specific gravity and availability on cluster evolution

The objective of this experimental study was to account for the role of sediment availability and specific gravity on cluster formation and cluster geometric characteristics (spacing and size). To isolate the effects of sediment availability and specific gravity on cluster evolution, mono‐sized spheres were used to simulate the cluster evolutionary cycle. Overall, twelve experimental runs were carried out in the laboratory flume. Six of these tests were performed by using glass spheres (specific gravity, SG = 2·58) and the other six by employing an equal combination of glass and Teflon spheres (SG = 2·12) of the same diameter to evaluate the role of specific gravity on cluster evolution. The three sediment availability conditions that were investigated here simulated isolated gravel elements, pool–riffle sequences and densely packed gravel‐bed. An advanced image analysis technique was employed to track the evolution of cluster microforms and provide quantitative information about the size and shape of clusters and the number of clusters per unit area. The results of this study showed that: (1) sediment availability affects the architecture and size of cluster microforms; and (2) clusters consisting of mono‐sized sediments start disintegrating at twice the incipient conditions. By performing complementary tests for the isolated gravel elements case, it was found that the evolutionary cycle of individual clusters could be described as follows, in order of increasing stress: no cluster→two particle cluster→comet→triangle→rhomboid→break up. Copyright © 2003 John Wiley & Sons, Ltd.