Numerical and theoretical research on stress distribution in the loosening zone of the trapdoor problem

The traditional theory of soil arching effect was developed on the assumption that stress distribution in the loosening zone is uniform. However, because of the deflection of principal stress' direction, the stress distribution in the loosening zone is actually ununiform. For the evaluation of principal stress axis deflection and stress redistribution, a discrete element method numerical model of trapdoor problem is established for the simulation of soil arching effect. Based on the numerical results, an arc shape of major principal stress trajectory and uniform horizontal stress distribution at the same depth of the loosening zone are adopted. An analytical model is raised to estimate the average loosening earth pressure acting on the trapdoor and stress distribution in the loosening zone at a limit state. In addition, comparison studies are carried out between the predictions of the proposed solutions and discrete element method numerical results as well as available model test results, thereby validating the accuracy of the proposed theoretical model. Both numerical and theoretical results indicate that the vertical stress distribution in the loosening zone is obviously ununiform. The load acting in the middle of loosening zone is transferred toward two sides so that the vertical stress distribution in loosening zone is concave.     

Multiple overpressure systems and their relationship with hydrocarbon accumulation in the Qikou Depression of the Bohai Bay Basin,China

Pressure measurements using drill stem tests and estimates from log data calculation indicate that three vertically stacked regional pressure compartments exist in the Qikou Depression of Bohai Bay Basin, N. China. The compartments comprise hydrostatic, upper weak, and lower overpressure systems. Laterally, overpressure (pressure coefficient > 1.2) occurs in the deeper areas and weakens gradually from the centre to the margin of the depression. The accumulation of oil and gas exhibits the interesting characteristics of oil‐bearing layers above gas‐bearing layers in the Qikou Depression. The pattern can be accounted for by the evolution of overpressure system, the maturity process of the source rock and the main fault activity. In the late Dongying Formation (Ed, 30 Ma), the lower overpressure system began to form shape, and the hydrocarbon sources generated a large volume of oil. However, because there was no migration pathway, the oil only accumulated in the original strata. In the late Guantao Formation (Ng, 12 Ma), the gas was generated, the upper overpressure system formed gradually, and the activity of the main fault gradually increased. Then, the overpressure pushed the early gathered oil to flow from the lower overpressure system into the upper overpressure system. Afterwards, the activity of the main fault decreased again and remains weak until now. Thus, later generated natural gas cannot keep migrating along the main fault and can only accumulate in the lower overpressure system. Copyright © 2014 John Wiley & Sons, Ltd.     

Iron isotopic systematics of UHP eclogites respond to oxidizing fluid during exhumation

The iron stable isotope compositions (δ⁵⁶Fe) and iron valence states of ultrahigh‐pressure eclogites from Bixiling in the Dabie orogen belt, China, were measured to trace the changes of geochemical conditions during vertical transportation of earth materials, for example, oxygen fugacity. The bulk Fe³⁺/ΣFe ratios of retrograde eclogites, determined by Mössbauer spectroscopy, are consistently higher than those of fresh eclogites, suggesting oxidation during retrograde metamorphism and fluid infiltration. The studied eclogites (five samples) display limited mid‐ocean ridge basalts (MORB)‐like (~0.10‰) δ⁵⁶Fe values, which are indistinguishable from their protoliths, that is, gabbro cumulates formed through differentiation of mantle‐derived basaltic magma. This suggests that Fe isotope fractionation during continental subduction is limited. Garnet separates display limited δ⁵⁶Fe variation ranging from ?0.08 ± 0.07 ‰ to 0.02 ± 0.07‰, whereas coexisting omphacite displays a large variation of δ⁵⁶Fe values from 0.15 ± 0.07‰ to 0.47 ± 0.07‰. Omphacite also has highly variable Fe³⁺/ΣFe ratios from 0.367 ± 0.025 to 0.598 ± 0.024, indicating modification after peak metamorphism. Omphacite from retrograde eclogites has elevated Fe³⁺/ΣFe ratios (0.54–0.60) compared to that from fresh eclogites (~0.37), whereas garnet displays a narrow range of ferric iron content with Fe³⁺/ΣFe ratios from 0.039 ± 0.013 to 0.065 ± 0.022. The homogenous δ⁵⁶Fe values and Fe³⁺/ΣFe ratios of garnet suggest that it survived the retrograde metamorphism and preserved its Fe‐isotopic features and ferric contents of peak metamorphism. Because of similar diffusion rates of Fe and Mg in garnet and omphacite, and constant Δ²⁶Mg_{omphacite‐garnet} values (1.14 ± 0.04‰), equilibrium iron isotope fractionation between garnet and omphacite was probably achieved during peak metamorphism. Elevated Fe³⁺/ΣFe ratios of omphacite from retrograde eclogites and variant Δ⁵⁶Fe_{omphacite‐garnet} values of the studied eclogites (0.13 ± 0.10‰ to 0.48 ± 0.10‰) indicate that oxidized geofluid infiltration resulted in the elevation of δ⁵⁶Fe values of omphacite during retrograde metamorphism.     

1999年北京持续高温天气过程的诊断分析

利用北京观象台观测资料和NCEP/NCAR再分析数据,对1999年6月24日至7月2日北京一次持续性高温天气的演变和发展过程及非绝热加热作用对系统的影响进行诊断分析,结果表明：在此次高温天气发生前,欧亚大陆中高纬度环流经向度很大,欧洲北部和贝加尔湖以南为高压脊控制,中亚和我国东北地区则处于低压槽内。贝加尔湖南部的高压脊纬向延伸范围较广,在东移过程中长时间影响北京。随着贝加尔湖以南的高压脊逐渐东移,北京上空下沉增温与非绝热加热作用有所增强,北京逐渐受到高温天气影响。在高温天气发生的后半阶段,我国东北的低压槽入海后在120130°E附近维持并发展,槽前非绝热加热率很大。从垂直方向来看,加热率在500 hPa以下随高度迅速增加,根据全型涡度方程,强烈的非绝热加热率垂直分布不均作为一个明显的涡度源区,对入海低压槽的稳定维持有显著的作用。而入海低压槽的稳定维持,又阻碍了华北高压脊的东移,使其在北京地区长时间稳定少动,为北京带来多日的持续性高温天气。     

岩石中的压力影形成的实验观测研究

野外地质观察发现,在大陆地壳变质岩中可以广泛观察到围绕一个大的单晶或者硬质点的两端区域填充低粘度相物质形成的压力影。为了定量研究岩石材料中压力影的形成条件,本文利用高精度Paterson气体介质变形装置,对含有刚性球的圣卡罗橄榄石和洋中脊玄武岩(MORB)的混合物圆柱型样品进行了高温高压扭转变形试验。变形实验前样品的初始熔融均匀分布,比例为φ≈0.05,变形试件尺寸为D8.9mm×L5.5mm,内含8粒直径约1mm的刚性球。扭转变形试验温度为1473K,围压为300MPa,应变率为γ≈1×10~(-4)s~(-1),最大剪切变形为γ≈4。实验结果表明,岩石受到扭转力的作用产生变形之后,当局部剪切应变达到γ≈1时,可以在刚性球周围形成熔融富集带和熔融贫乏带,即压力影构造,围绕刚性球对称分布。由于熔融分布的不均一性,富集带熔融比例上升,最高可以达到φ_(high)=0.1~0.3,熔融贫乏带熔融比例下降,含量为φ_(low)=0.01~0.02。由于刚性球对其周围的压力分布的扰动区域大约为刚性球的尺度范围,因此,在离开刚性球一定距离后,熔融趋于均匀分布。     

Characteristics and Genetic Mechanisms of Overpressure in the Depressions of Bohai Bay Basin, China

The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.     

直线型海洋重力仪负漂移原因分析及处理

分析了直线型KSS31M(SN035)海洋重力仪短期负漂移现象的原因、采取的处理措施和经验总结,认为在减震措施不足的情况下,重力仪长期经受震动,而频繁的搬动会使重力仪弹性系统中的金属弹簧产生较大的弹性疲劳,这种影响在短时间内无法完全消除,由此可能导致月漂移超标;陀螺稳定平台轴因承受震动磨损较严重,轴承间隙变大,导致安装在平台之上的重力传感器经过抛物线测试之后不能完全垂直指向地心,重力在水平方向存在一个微小的分量,最终导致重力读数偏小,即短期负漂移;重力基点环境的变化等对漂移也有一定的影响。建议在搬动重力仪后将仪器保持足够长时间的恒温后再开机,密切监测一段时间,以确保仪器处于良好的工作状态。     

腾冲火山构造区马站岩浆囊地球物理特征的再探讨

云南腾冲火山盆地深部存在岩浆囊是人们关注的问题,多方面进行了大量的研究且存在不同意见。作者此前依据低电阻异常推断出位于小空山、大空山、黑空山等火山口的下部,深13~30 km范围内东西向25 km,南北向30km的低电阻率的岩浆囊,其东侧为大盈江断裂。文章利用反射地震、重力、航空磁测资料进一步探讨了岩浆囊的其他地球物理特征。由于火山喷发,不仅在火山口附近形成了局部物质亏损,而且,岩浆囊本身也亏损了岩浆物质,在重力上延图中滤去了表层的火山局部负重力异常后,呈现出大空山北侧的与低阻体相对应的负重力异常,这与岩浆囊高温熔融状态含水低密度物质有密切关系。整体的重力负异常印证了低阻岩浆囊的存在。腾冲马站岩浆囊的温度为397~651°C,平均温度为524°C,其主体中心部位不可能存在磁性体。对航磁资料的处理,消除表层火山岩影响后,仍然发现有较强磁异常,其平面投影范围与低阻体相近,推断磁异常是岩浆囊顶层,在15 km深度以上范围内,随着岩浆囊体温度逐步下降,当低于480°C以后会形成新的铁磁性矿物,因此,在囊体上层出现了范围与囊体相近的较强的磁性体。反射地震仅仅在浅部较清楚地观测到较连续的反射波界面,是浅部火山岩、含水层、以及花岗岩顶界面的反映。向深部反射界面很不连续推测是由于多次岩浆上涌,其喷发时间有先后,成分有差异,故岩浆囊物质的不均匀性,虽然由于含水、矿化、熔融体构成了低电阻的共性,可温度的不均匀,却又显示了不同期次岩浆成分有变化,由岩浆囊向地表的通道上,东部花岗岩下为高速,相对于较低温度的物质,在小空山、大空山和黑空山深部沿大盈江断裂带有东西两个大的隐伏花岗岩体之间是最新的火山喷发通道,具有相对低速的通道。     

钻孔压水试验水压式栓塞排水泄压问题研究

压水试验水压式栓塞较其他类型栓塞可靠、灵活,但一直存在试验结束后排水泄压难题,使该类型栓塞使用局限于浅孔及地下水位高的钻孔。本文对该问题进行了研究,提出了解决方案,设计了新型水压式栓塞结构。解决了一直以来水压式栓塞的排水泄压难题,突破了试验孔深限制,使水压式栓塞能得到广泛应用。介绍了该新型水压式栓塞的结构和工作原理以及工程应用效果。     

河元背地区绳索取心钻进泵压计算模型的建立与应用

泵压是反映金刚石绳索取心钻进时井内作业是否正常的重要参数。为了进一步研究泵压波动变化与实际钻进作业之间的关系,指导钻进工作的快速、安全开展,结合江西相山河元背地区CUSD2井实际泵压波动数据及相关钻进资料,建立了适用于本井的循环系统压力损失计算模型。对比分析模型计算的理论泵压与实际泵压的波动变化趋势,将模型应用于实际钻进,在此基础上预测后续地层的泵压波动区域范围,发现7 MPa的泵压安全值不再适用于后续地层钻进,调整设置泵压安全值为10 MPa,并利用邻井泵压波动数据进一步验证其可靠性。适当调整修正理论模型,使其可应用于河元背以及相山地区绳索取心钻进中,指导该地区钻探工作。