埋藏基岩地形对地震波动影响的模拟研究

本文以超声地震模型试验为基础,着重从地震波的强度方面来阐明埋藏基岩地形对地震波动的影响,提出了利用振动能量分析地震动问题的重要性,理论分析及实验结果表明,埋藏基岩地形对地震波动的影响表现为:一方面基岩面凹凸不平,致使基岩面上不同部位接收能量大小不同;另一方面,基岩的凹凸面对地震波产生汇聚与发散作用,这两方面共同作用的结果使得地表不同地点表现出不同的地震动强度。     

高分辨率中子俘获伽马能谱测井

叙述了NCGS测井的原理及元素含量计算方法;解决了现场测井中计算元素含量时必须得到的参数,如等效相对探测效率曲线的刻度、探管和井液中干扰(Fe、Ti、H)份额的扣除。用自己研制的仪器经山东几个煤田钻孔实测资料验证.计算的元素含量与岩芯化学分析对照结果,其精度不低于美国PGT公司和Schlumberger公司制造的仪器。此外,还介绍了连续测量获得的谱,经处理绘制成连续曲线,首次推出S_(511)、S_B、S_H/S_B等曲线,提供多种有用地质信息。     

鲜水河断裂带古构造残余应力场对大地震的控制

以岩体正交异性弹性理论为基础,用X射线法,在鲜水河断裂带测区沿7条测线,测量了岩体三维残余应力,绘成区域残余应力等值线图、主应力线图及其应变能密度等值线图,探讨了其对带内大地震的控制作用     

山西及其邻近地区地壳垂直形变与地震危险性分析

山西及其邻近地区地壳垂直形变出现的两升三降的分布格局,反映出现代构造块体活动在不断增强.通过地震活动和区域形变场分析,可以看出山西地区自50年代以来地震释放能量有不断加强趋势,区域形变出现了有规律的四象限分布.预计今后10年内本区若干危险点有可能成为地震能量大释放地区.     

陕西地区地震活动性的初步分析

依据震中迁移、频度变化曲线、能量释放曲线、震级频度关系和时间序列的预测方法等,对陕西地区的地震活动性进行了初步分析,认为:陕西地区M_L>3.5级的地震活动存在着明显的由北向南、自东向西的迁移特点,其地震活动水平比较正常,今后5年内可能发生M_L≥4.3级地震。     

Spectral magnitude and seismic radiated energy computed from CDSN records

We have employed 10 digital records and computed the spectral magnitude and the seismic radiated energy for 18 large earthquakes (M _s≥6) occurred in Eur-asian belt during 1986–1989. The nine digital stations (CD-SN) distribute all over China and one in Germany. The spectral magnitudes of various period have different stability among stations. The stability is better for maximum spectral magnitudemi and seismic radiated energyE, their differences among stations are smaller, especially for the stations where the ray path main penetrates the low mantle. But the stability of corner period is usually not good. The relation between seismic radiated energy and seismic moment magnitudeM _w is lg (E)=1.5Mw+c, wherec is a constant. The maximum spectral magnitudemi=M _w+0.1, it is consistant with theoretical prediction. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 418–426, 1993. This work supported by the Deutsche Forschungsgemeinschaft, Bonn, F. R. Germany. The support is grateful acknowledge.     

Reflection and transmission ofSH waves in an initially stressed medium consisting of a sandy layer lying over a fluid-saturated porous solid

Biot's theory is employed to study the reflection and transmission ofSH waves in a sandy layer lying over a fluid-saturated porous solid half-space. The entire medium is considered under constant initial stress. Effects of sandiness, initial stress, anelasticity and viscosity of the interstitial fluid on the partitioning of energy are studied. In the presence of initial stress the incident wave starts attenuating when incider beyond a certain angle (depending upon the amount of initial stress), even if the medium is perfectly clastic. Anelasticity of the solid layer results in the dissipation of energy during transmission. The direction of attenuation vector of incident wave affects the dissipation energy to a large extent. Effect on partitioning of energy reverse at incidence after the critical angle. A complete account of energy returmed back to the underlying half-space and that which is dissipated in the overlying layer has been discussed analytically as well as numerically.     

Meanders caused by hyperconcentrated water flow: An example from the loess plateau,China

This paper describes meandering alluvial rivers with mean annual suspended-sediment concentrations of more than 100 kgm^?3 on the Loess Plateau, China, and explains their formation as caused by the effect of hyperconcentrated water flow. When the river is dominated by hyperconcentrated flow, the rate of energy expenditure required for sediment transport declines significantly. Accordingly, the river channel adjusts itself to a lower channel gradient by increasing the river length, resulting in a meandering channel. Since the stable transportation of sediment by hyperconcentrated flow is dependent on river channel boundary conditions, the latter play an important role in the formation of meanders of this kind. The paper also discusses the conditions for the discrimination of meandering and braided rivers in this area.     

Hydrofracture mechanisms in rock during pressure grouting

Summary Hydrofracture Mechanisms in Rock During Pressure Grouting. The paper examines the basic meachnisms controlling the initiation of fractures in rocks and layered soils during pressure grouting, and their subsequent propagation into the ground mass. Previous analyses of fracture initiation have tended to concentrate on simplified models in which the ground is treated as an impervious elastic or Mohr-Coulomb continuum. The present method allows for the porous or fissured nature of the ground by considering the effect of seepage forces induced by the pore pressure gradient. The effect is quantified by use of a parameterN such that the ratio of fluid force used in expanding the injection hole, to that used in forcing fluid through void spaces, isN to (1—N).Analysis of hydrofracture propagation is based on stress analysis of a borehole in an elastic continuum, the propagating fracture zone around the borehole being represented as a non-elastic material governed by the Mohr-Coulomb failure criterion. This is supplemented by an energy approach which equates the energy supplied to the ground from the injection pump, with the energy stored in the ground and the energy necessary to fracture it.

---

Zusammenfassung Brucherscheinungen im Fels bei Verprearbeiten. In der Arbeit wird der grundlegende Mechanismus untersucht, welcher bei Verpreßarbeiten in Fels und geschichtetem Boden zur Einleitung und Ausbreitung von Brüchen führt. Frühere Untersuchungen des Bruchbeginns stützten sich im wesentlichen auf vereinfachte Modelle, in denen der Untergrund als undurchlässiges Kontinuum angesehen wird, das entweder elastisch ist oder der Mohr-Coulombschen Bruchbedingung genügt. Die neue Methode berücksichtigt dagegen eine Porosität oder Klüftung des Untergrundes durch Ansatz der vom strömenden Medium auf das Gebirge ausgeübten Belastung. Diese Belastung wird aufgeteilt in einen Druckverlust an der Bohrlochwand (gleich ParameterN mal Verpreßdruck) und die entsprechende, über den gesamten durchströmten Bereich verteilte Belastung.Die Untersuchung der Bruchausbreitung geht von der Spannungsermittlung um ein Bohrloch in einem elastischen Kontinuum aus, wobei in der sich ausbreitenden Bruchzone um das Bohrloch herum nichtelastisches Material angenommen wird, das dem Mohr-Coulombschen Bruchkriterium genügt. Zur Ergänzung dient eine Energie-Betrachtung, bei der die von der Injektionspumpe abgegebene Energie gleichgesetzt wird der im Untergrund gespeicherten Energie und der aufgewendeten Brucharbeit.

---

Résumé Les mécanismes de la fracturation hydraulique dans les roches pendant les injections sous pression. Le mémoire examine les mécanismes fondamentaux qui gouvernent l'initiation des ruptures dans les roches et les sols stratifiés, au cours des injections et leur propagation dans les massifs. Les analyses antérieures de l'initiation de la rupture, se sont concentrées sur des modèles simplifiés où l'on considérait la roche comme un milieu élastique et imperméable, ou comme un milieu de Mohr-Coulomb. La présente méthode admet que le massif est poreux ou fissuré, en considérant l'action des forces de percolation engendrées par le gradient de pression interstitielle. Cette action est quantifiée par un paramètreN, tel que le rapport de la force du liquide employée à dilater le forage d'injection, à celle employée pour forcer le coulis à travers les vides soitN/(1—N). L'analyse de la propagation des ruptures se base sur l'analyse des contraintes autour d'un forage dans un milieu élastique, alors que la zone de la rupture qui se propage autour du forage est représentée par un milieu non-élastique admettant le critère de rupture de Mohr-Coulomb. Cette analyse est complétée par une approche énergétique, où l'énergie qui est fournie au massif par la pompe d'injection est égalée à l'énergie emmagasinée dans la roche et à l'énergie de rupture.

---

Nomenclature A area of new cracks created per unit volume of time t - E total work done by injection fluid - E _i irrecoverable component of energy - E _{i c} work done in fracturing rock or soil - E _{i l} work done to overcome various frictional forces in grouting system - E _{i p} work done to cause plastic deformation of fractured zone - E _{i s} work done to overcome shear strength of fluid during flow - E _{i v} work done to overcome frictional drag between fluid and rock in soil surfaces during flow - E _r recoverable component of energy - E _{r f} elastic strain energy stored in fluid - E _{r s} elastic strain energy stored in rock or soil - h height of overburden - i j 1, 2, 3 - K ₀ coefficient of horizontal earth pressure - k permeability of ground to grout - L length of cylindrical grout source - n rock or soil porosity - p average fluid pressure between timet and (t + t) - p ₀ injection pressure - R radius of grout front - r radial distance from borehole axis - r ₀ radius of borehole - r ₁ radius of fractured zone - S specific surface area of rock or soil - S _T tensile strength of rock or soil - t time - u grout seepage velocity - V volume of grout injected - v volumetric strain - specific surface energy of rock - bulk density of rock or soil - _{i j} ^e elastic strain increment tensor - _{i j} plastic strain increment tensor - v Poisson's ratio - _{i j} average stress tensor in the ground during timet and (t + t) - _R , _T, _Z radial, tangential and vertical stresses induced by grouting - _r , _t , _z radial, tangential and vertical stress around borehole before grouting - grout shear strength - angle of internal friction of rock or soil With 7 Figures     

速度光滑对反射地震信号的影响分析

光滑处理使得单界面成为非均匀薄层,界面反射转变为层反射.为了探讨光滑处理的影响,以平面波作为入射波场,首先利用过渡层反射系数推导了反射信号的理论公式,然后就非均匀薄层下反射系数的计算问题,给出了具体的实现算法,并通过与经典Epstein过渡层反射系数解析结果的对比说明了算法的精度.最后在单界面及其被光滑后界面的对比分析中,得出了几点重要结论：随着光滑次数的增加,反射信号的到时基本保持不变,而反射信号的主频与能量呈减少趋势,其中信号能量在低光滑次数的衰减速率明显大于高光滑次数.