Carbon Isotope Geochemistry of the Orinoco Basin

Stable carbon isotope ratios have been used to study the sources of particulate organic carbon (POC) and total dissolved inorganic carbon in the Orinoco Basin. The isotopic composition of total dissolved inorganic carbon shows a range of from -8·1 to -23·0 ppt, an indication of dominance of biological processes. The isotopic composition of POC exhibits a range of from -24·1 to -34·6 ppt with little seasonal variation. The isotopic evidence indicates that the POC is predominantly of terrestrial origin rather than a result of in situ planktonic production. The similarity of isotopic composition of POC and coastal sediments suggests that riverine organic detritus has been transported 30-50 km offshore in a direction parallel to the Orinoco river channel.     

九龙江河口区表层水铀同位素的粒级分布

利用微滤和超滤技术研究了九龙江河口区表层水中铀及其同位素组成的粒级分布和地球化学行为.结果表明,溶解态(<0.4μm)中低分子量组分(<10 000 u)占主要份额,胶体态(10 000 u~0.4μm)238U所占比例不足1%,且随盐度的增加其所占份额逐渐降低.溶解态、低分子量组分和胶体态238U的比活度与盐度之间存在良好的线性正相关关系,证实它们在九龙江河口区呈现保守行为.在颗粒态(>0.4μm)中,各粒级组分238U所占份额主要受控于相应颗粒物的浓度,在盐度小于20的区域,各粒级颗粒组分238U占颗粒态的份额有如下变化次序:10~53μm>2~10μm>0.4~2μm>大于53μm,而在盐度大于30的近外海站位,该次序发生一些变化:0.4~2μm>10~53μm>2~10μm>大于53μm,最小粒级颗粒组分238U的贡献有所增加,反映了自生铀贡献的加强.九龙江河口区表层水中溶解态(包括低分子量组分和胶体态)的234U/238U)_A.R.均大于1,显示出234U过剩的特征,而各粒级颗粒组分中的234U/238U)_A.R.则接近于平衡值(1.0).这一现象与陆地岩石风化过程中水体对铀的淋滤释出量及234U的优先浸出有关.对232Th/238U质量比的研究显示,溶解态及其所包括的低分子量组分和胶体态的232Th/238U质量比均小于1,而颗粒态及其所包括的4个粒级组分中的232Th/238U质量比均大于1,反映了向外海输送过程中铀、钍地球化学行为的差异.     

Long-range underwater photography in the deep ocean

Although the optical properties of seawater at extreme depths are more suitable for underwater photography than those at the surface or on continental shelves, they still impose severe limitations on long-range wide area bottom photography. Additionally, deep ocean operations impose technical limitations on control, power and bandwidth. This chapter reviews the approaches contemplated or made towards improving the camerato-target range in underwater photography in the deep ocean. Further significant improvements await advances in control, power/light sources and bandwidth reduction. With the developments now contemplated, TV and video systems will eventually present a strong challenge to emulsion film techniques.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

东太平洋沉积物U的地球化学

本文对地矿部“海洋四号”科学考察船１９８７－１９８９年在东赤道太平洋ＣＣ区所取得的２７个深海表层沉积样品进行Ｕ的地球化学分析，探讨了Ｕ在深海沉积中的地球化学行为，结果表明，不同类型沉积的Ｕ含量不同，平均值由大至小的次序的含沸石粘土（２．１６×１０＾－６），硅质粘土（１．９５×１０＾－６），硅质软泥（１．６５×１０＾－６），钙质硅质粘土（１．５９×１０＾－６），在同类型沉积中Ｕ的分散性较大；Ｕ在区域     

外生铀矿成矿系统研究与古水动力分析

分析了砂岩型铀矿的国内外研究现状和发展趋势,尝试从成矿系统演化论的角度提出新的研究思路：即,以系统观为指导,以物质迁移的动力学为主线,从区域地质背景演化,特别是构造动力演化、岩相古地理等方面入手,恢复矿前期、成矿期、矿后期的区域古地形格局。运用融入了地下水流动系统理论的古水文地质分析方法,重建区域演化进程中各地质时期的古流场。着重从区域尺度上研究矿质的源-迁移-汇（成矿）-保存的动力学过程。     

浅析库车前陆盆地水文地质条件与铀成矿作用

根据库车前陆盆地水文地质条件,分析了地下水的铀成矿作用,并通过热力学计算等方法,对水中铀的存在形式及铀的溶解、迁移和沉淀富集过程作了较为详细的论述,阐明了盆地水化学及铀水文地球化学环境,并提出了成矿有利地段和有利层位。     

CSAMT法在松辽盆地伊胡塔地区嫩江组中的定位应用

上白垩统嫩江组不仅是松辽盆地南部重要的生油层系,而且在本区砂岩型铀成矿中也起着非常重要的作用。从ZK4孔的方法过井测深试验以及地电结构的对比分析入手,对探区内嫩江组的空间分布范围进行了分析研究,通过钻探施工,证实了CSAMT法应用的有效性。