The effects of yawing motion with different frequencies on the hydrodynamic performance of floating vertical-axis tidal current turbines

Under real sea conditions, the hydrodynamic performance of floating vertical-axis tidal current turbines is affected by waves and currents. The wave circular frequency is a significant factor in determining the frequencies of the wave-induced motion responses of turbines. In this study, the ANSYS-CFX software (manufacturer: ANSYS Inc., Pittsburgh, Pennsylvania, United States) is used to analyse the hydrodynamic performance of a vertical-axis turbine for different yawing frequencies and to study how the yawing frequencies affect the main hydrodynamic coefficients of the turbine, including the power coefficient, thrust coefficient, lateral force coefficient, and yawing moment coefficient. The time-varying curves obtained from the CFX software are fitted using the least-squares method; the damping and added mass coefficients are then calculated to analyse the influence of different yawing frequencies. The simulation results demonstrate that when analysing non-yawing turbines rotating under constant inflow, the main hydrodynamic coefficient time-varying curves of yawing turbines exhibit an additional fluctuation. Furthermore, the amplitude is positively correlated with the yawing frequency, and the oscillation amplitudes also increase with increasing yawing frequency; however, the average values of the hydrodynamic coefficients (except the power coefficient) are only weakly influenced by yawing motion. The power coefficient under yawing motion is lower than that under non-yawing motion, which means that yawing motion will cause the annual energy production of a turbine to decrease. The fitting results show that the damping term and the added mass term exert effects of the same level on the loads and moments of vertical-axis turbines under yawing motion. The results of this study can facilitate the study of the motion response of floating vertical-axis tidal current turbine systems in waves.     

固相吸附毒素跟踪技术(SPATT)在浙江南麂海域的应用

浙江南麂岛海域是我国近岸贝类的重点养殖区,近年来一直遭受脂溶性贝类毒素(lipophilic shellfish toxins,LSTs)的污染,威胁着人类健康。为了建立有效的食品安全预警方法,本研究利用固相吸附毒素跟踪技术(solid phase adsorption toxin tracking,SPATT)在该海域进行了为期一年的野外监测和LSTs毒素分析。结果表明:7种LSTs毒素在SPATT(DIAION?HP20)中被检出,分别是大田软海绵酸(okadaic acid,OA)、鳍藻毒素-1(dinophysistoxin-1,DTX-1)、虾夷扇贝毒素(yessotoxin,YTX)及其衍生物homo YTX、扇贝毒素-2(pectenotoxin-2,PTX-2)及其衍生物7-epi-PTX2sa和环亚胺毒素(gymnodimine,GYM);有8种毒素在厚壳贻贝(Mytilus galloprovincialis)中被检出,分别是OA、DTX1、homo YTX、PTX2、7-epi-PTX2sa、GYM、原多甲藻酸贝类毒素-3(azaspiracid-3,AZA-3)和虾夷扇贝毒素衍生物45-OH-homo YTX。整体而言,SPATT(HP20)中吸附的毒素种类与贝肉中监测出的毒素种类大体上一致,且两者间OA、DTX1和PTX2的浓度在时间上具有较好的相关性,可见SPATT(HP20)对这些LSTs毒素具有较高的灵敏度,有望作为水体中LSTs毒素的预警监测材料。南麂岛海域LSTs分布特征明显,夏季最高,其次是春秋季,冬季最低,其中2014年夏季贝肉中OA毒素含量高达77.19ng/g贝肉,超出国家限量标准(45ng/g贝肉)比例达11.76%,为浙江南麂海域贻贝的食用安全带来隐患。     

Investigation of a longfin inshore squid's swimming characteristics and an underwater locomotion during acceleration

In the present study, locomotion of a real longfin inshore squid (Doryteuthis pealeii) was numerically investigated. Geometry of a real squid was obtained using computed tomography (CT) images. In addition to a two-dimensional axisymmetric squid model, a modified squid model with no cavities around her head and an ellipse shaped model were generated with a fineness ratio (the ratio of body length to maximum body diameter) of 7.56. These numerical models were exposed to an acceleration with two different velocity programs. Added mass and basset forces on bodies were calculated during acceleration of the squid models starting from rest. Pressure and viscous drag forces were also calculated due to pressure variation along the squid models and friction on the surface of the models. The effect of a nozzle diameter on jet velocities and propulsive efficiency at all bodies were evaluated when time dependent velocity profiles (from 0 to 10 m/s in 0.5 and 1 s time durations) were set for the inlet of computational domain. The modified squid model required least thrust force during acceleration phase of time dependent velocity profile compared to the other models while the 0.02 m nozzle diameter provided largest propulsive efficiency for all models.     

Research of in-situ hydraulic test method by using double packer equipment

Double packer equipment for hydraulic test can be used to measure pressure of test zone directly, and it is frequently used to perform many kinds of hydraulic tests and take groundwater sample from borehole. The test method of this equipment mainly includes the test design, implementation, interpretation and synthetic analysis. By adopting the double packer equipment for hydraulic test, the parameter distribution of rock permeability along borehole can be acquired, as well as the connectivity, water conductivity and water bearing capacity of the disclosed structure and the chemical characteristics of the deep groundwater. It is a necessary method for the research and evaluation of the complex hypotonicity terrace site selection under geological conditions. This method is not only suitable for the geological disposal of high level radioactive waste, but also can be used in the site selection of underground facilities such as storage of petroleum and carbon dioxide. Meanwhile, it has a good application prospect in other hydrogeological investigation fields.     

中国近海以及邻近海域海洋再分析产品(CORA)中季节内变化的评估

A regional reanalysis product—China Ocean Reanalysis(CORA)—has been developed for the China's seas and the adjacent areas. In this study, the intraseasonal variabilities(ISVs) in CORA are assessed by comparing with observations and two other reanalysis products(ECCO2 and SODA). CORA shows a better performance in capturing the intraseasonal sea surface temperatures(SSTs) and the intraseasonal sea surface heights(SSHs) than ECCO2 and SODA do, probably due to its high resolution, stronger response to the intraseasonal forcing in the atmosphere(especially the Madden-Julian Oscillation), and more available regional data for assimilation. But at the subsurface, the ISVs in CORA are likely to be weaker than reality, which is probably attributed to rare observational data for assimilation and weak diapycnal eddy diffusivity in the CORA model. According to the comparison results, CORA is a good choice for the study related to variabilities at the surface, but cares have to be taken for the study focusing on the subsurface processes.     

星载SAR对雨团催生海面风场的观测研究

雨团或对流雨是热带与亚热带地区的主要降雨形式,较易被高分辨率星载合成孔径雷达（SAR）探测到。SAR图像上的雨团足印是由大气中雨滴的散射与吸收、下沉气流等共同导致形成的。本文以RADARSAT-2卫星100 m分辨率的SAR图像上雨团引起的海面风场及其结构反演与解译作为实例进行分析。使用CMOD4地球物理模式函数,分别以NCEP再分析数据、欧洲MetOp-A卫星先进散射计（ASCAT）和中国HY-2卫星微波散射计的风向为外部风向,进行了SAR图像的海面风场反演。反演的海面风速相对于NCEP、ASCAT和HY-2的均方根误差（RMSE）分别为1.48 m/s,1.64 m/s和2.14 m/s。SAR图像上一侧明亮另一侧昏暗的圆形信号图斑被解译为雨团携带的下沉气流对海面风场（海面粗糙度）的改变所致。平行于海面背景风场其通过雨团圆形足印中心的剖面上的风速变化可拟合为正弦或余弦曲线,其拟合线性相关系数均不低于0.80。背景风场的风速大小、雨团引起的风速大小以及雨团足印的直径可利用拟合曲线获得,雨团足印的直径大小一般为数千米或数十千米,本文的8例个例解译与分析均验证了该结论。     

末次冰盛期后黄河三角洲沉积物的磁性特征及其沉积环境

On the basis of measuring the magnetic parameters of sediment in Core YDZ1, combined with a grain size analysis and Carbon-14 dating, the magnetic properties of sediment and sedimentary environment in the Huanghe(Yellow River) Delta area after the last glacial maximum have been studied. The results show that the ferrimagnetic minerals of a pseudo single domain and multi domain particles dominate the magnetic properties of sediment in Core YDZ1. The imperfect anti ferrimagnetic minerals have more contribution on sediment in a depth of 24.0–22.1 m, and more stable-single domain and pseudo single domain particles exist. The susceptibility of anhysteretic remanent magnetization and the ratio of the susceptibility of anhysteretic remanent magnetization to saturation isothermal remanent magnetization show a decrease trend below depth of 24 m, a marked increase trend in a depth of 24.0–13.5 m, and a rapid decrease at depth of 13.5 m, then a fluctuation trend upward. The above two magnetic parameters and the ratio of the susceptibility of anhysteretic remanent magnetization to the mass susceptibility can be regarded as the proxy indicators for the content of clay(4 μm)and the fine-grained size(32 μm). The sedimentary environment after the last glacial maximum in the Huanghe Delta area has experienced the fluvial facies, the tidal flat facies, the neritic facies, the pro delta facies, the delta front facies and the floodplain facies. Thickness of the Holocene transgression layer is 10.5 m and the depth of substrate is about 24 m according to the YDZ1 core. The sedimentary dynamic has a variation trend with strongweak-strong, which has been proved by the Flemming triangular schema.     

Paleo-redox depositional conditions inferred from trace metal accumulation in two Cretaceous-Paleocene organic-rich sequences from Central Egypt

Cretaceous-Paleocene organic-rich sediments in Egypt occur as an east-west trending belt extending from the Quseir-Safaga district (Red Sea) to the Kharga-Dakhla (Western Desert) region. They are associated with the Duwi Formation (phosphate-bearing) and the overlying Dakhla Formation (deeper epicontinental shale/marl). This study aims to reconstruct the paleo-redox conditions during deposition of these thermally immature organic-rich sediments using carbon-sulfur-iron systematics and trace metal proxies in two cores, one each from the Quseir and Abu Tartur areas. Paleoproductivity, based on P content, seems to have been higher in the Quseir section than in the Abu Tartur section. The Quseir section also records a relatively greater occurrence of anoxic conditions during the accumulation of these sediments than the Abu Tartur section. This difference is indicated by its markedly higher total organic carbon (TOC) content as well as higher contributions of redox-sensitive and sulfide-forming metals (Mo, U, Ni, V, and Co). A weak correlation exists between S and TOC, and a positive S intercept (>1) was observed in most of the rock units of the study sections. A high consistency between the TOC-S-Fe relations and trace metals findings was found. The uppermost Duwi and the lowermost Dakhla strata, which have the highest TOC and represent a maximum sea transgression during the Late Cretaceous, have the highest contents of redox-sensitive trace metals. The carbonate-dominated transgressive Baris and Beida members of the Dakhla Formation record relatively stronger oxygen-depleted conditions during their accumulation than others, which led to relatively higher TOC contents and redox-sensitive metal accumulations. A scenario for the environmental conditions that existed during the deposition of these organic-rich successions, based on compiled trace metals and TOC-S-Fe implications, is reconstructed here.     

Origin of the Breno and Esino dolomites in the western Southern Alps (Italy): Implications for a volcanic influence

The Esino Limestone of the western Southern Alps represents a differentiated Ladinian-Lower Carnian (?) carbonate platform comprised of margin, slope and peritidal inner platform facies up to 1000 m thick. A major regional subaerial exposure event lead to coverage by another peritidal Lower Carnian carbonate platform (Breno Formation). Multiphase dolomitization affected the carbonate sediments. Petrographic examinations identified at least three main generations of dolomites (D1, D2, and D3) that occur as both replacement and fracture-filling cements. These phases have crystal-size ranges of 3–35 μm (dolomicrite D1), 40–600 μm (eu-to subhedral crystals D2), and 200 μm to 5 mm (cavity- and fracture-filling anhedral to subhedral saddle dolomite D3), respectively.The fabric retentive near-micritic grain size coupled with low mean Sr concentration (76 ± 37 ppm) and estimated δ¹⁸O of the parent dolomitizing fluids of D1 suggest formation in shallow burial setting at temperature ∼ 45–50 °C with possible contributions from volcanic-related fluids (basinal fluids circulated in volcaniclastics or related to volcanic activity), which is consistent with its abnormally high Fe (4438 ± 4393 ppm) and Mn (1219 ± 1418 ppm) contents. The larger crystal sizes, homogenization temperatures (D2, 108 ± 9 °C; D3, 111 ± 14 °C) of primary two-phase fluid inclusions, and calculated salinity estimates (D2, 23 ± 2 eq wt% NaCl; D3, 20 ± 4 eq wt% NaCl) of D2 and D3 suggest that they formed at later stages under mid-to deeper burial settings at higher temperatures from dolomitizing fluids of higher salinity, which is supported by higher estimated δ¹⁸O values of their parent dolomitizing fluids. This is also consistent with their high Fe (4462 ± 4888 ppm; and 1091 ± 1183 ppm, respectively) and Mn (556 ± 289 ppm and 1091 ± 1183 ppm) contents, and low Sr concentrations (53 ± 31 ppm and 57 ± 24 ppm, respectively).The similarity in shale-normalized (SN) REE patterns and Ce (Ce/Ce*)_SN and La (Pr/Pr*)_SN anomalies of the investigated carbonates support the genetic relationship between the dolomite generations and their calcite precursor. Positive Eu anomalies, coupled with fluid-inclusion gas ratios (N₂/Ar, CO₂/CH₄, Ar/He), high F⁻ concentration, high F/Cl and high Cl/Br molar ratios suggest an origin from diagenetic fluids circulated through volcanic rocks, which is consistent with the co-occurrence of volcaniclastic lenses in the investigated sequence.     

The diagenetic history of Oligocene-Miocene sandstones of the Austrian north Alpine foreland basin

Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC.