The propagation of a single shear crack: A displacement discontinuity model

Numerical studies using the displacement discontinuity method show that a single shear crack under compression propagates in its own direction, because such propagation results in the maximum release of strain energy. The methods of linear elastic fracture mechanics may not be used for such a closed crack, and the stress intensity factors are meaningless in that case. Laboratory observations of propagation by means of kinks at an angle of approximately 70° to the crack may be due to heterogeneities, to the effect of a preexisting crack, to end effects, to microcracking, or to some combination of these factors. Such kinks may thus be local phenomena which cannot release most of the strain energy, and are not incompatible with our numerical results which are based on a global energy balance.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Blind prediction of the site effects at Ashigara Valley,Japan, and its comparison with reality

Weak and strong ground motions were numerically predicted for three stations of the Ashigara Valley test site. The prediction was based on the records from a rock-outcrop station, one weak-motion record from a surface-sediments station, and the standard geotechnical model. The data were provided by the Japanese Working Group on the Effects of Surface Geology as a part of an international experiment. The finite-difference method for SH waves in a 2-D linear viscoelastic medium (a causalQ model) was employed.Comparison with the real records shows that at two stations the predictions fit better than at the third one. Strangely, the two better predictions were for stations situated at larger distances from the reference rock station (one station was on the surface, the other in a borehole). The strong ground motion (the peak acceleration of about 200 cm s^–2) was not predicted qualitatively worse than the weak motion (8 cm s^–2). A less sophisticated second prediction (not submitted during the experiment), in which we did not attempt to fit the available weak-motion record at the sedimentary station, agrees with the reality significantly better.     

Information structure analysis for quantitative assessment of mineral resources and the discovery of a silver deposit

We propose an information-structure-analysis (ISA) method to quantify the correlations between quantitative and qualitative variables as well as within each type of variable. This method is applied to the evaluation of mineral resources in the western Zheijiang Province of China. The district contains a number of silver-bearing Fe–Cu–Pb–Zn mineral deposits near igneous complexes and FeCuPbZn zones away from the complexes. Silver anomalies occur not only in the known Fe–Cu–Zn–Pb deposits, but also in the country rock, suggesting the possible existence of silver deposits far from the igneous complexes.The tonnage distribution of silver is modeled by Monte Carlo simulation. This simulation is conducted on the basis of the correlations between silver (Ag) and lead (Pb), since no known data on silver is available. The known tonnage distribution of lead in 11 control cells was used to approximate the tonnage distribution of silver in the Monte Carlo simulation. With ISA and Monte Carlo methods, the total amount of potential polymetallic resources in 49 cells in the western Zhejiang Provice is predicted. Significantly, a deposit with about 24 tonnes of silver has been found within our exploration target area.     

Simco,a simulation software for CONICA,the coude nir camera for the very large telescope

CONICA is an acronym for COudé Near Infrared Camera. It is one of the four currently planned Infrared instruments for ESO's Very Large Telescope (VLT) in Chile. This multimode instrument is to be installed at the Coudé-focus (of Unit Telescope no. 1), where adaptive optics and speckle interferometry will also be available. High angular resolution imaging (to the diffraction limit) will be possible in the 1–5 m range, as well as spectroscopy with low- and medium resolution and polarimetry by means of Wollaston prism and wiregrid analysers. Various softwares are developed for this instrument. One of them: the Simulation Software has a threefold aim: 1. provide the user with feedback information on his/her choices of observational parameters. This is be achieved by displaying the calculated performance and throughput of the combined Source-Atmosphere-Telescope-Camera-Detector system in various formats, such as images, tables, isophotical images ... for point as well as for extended sources (also annular, double, etc.); 2. verify if his expectations are realistic, before actually using CONICA itself. 3. give feedback on the design to the developers of the instrument.On leave from his original institute, now at ESTEC in the ISO-project     

Effects of onshore and offshore topography on sea breeze circulation: An observational study at eastern Attica,Greece

Field measurements of wind, air temperature and humidity were taken at the eastern part of the Attika district in June 1991, to examine the topographic influences exerted on the local sea breezes. These influences are due either to the elongated Evia island, faced by the northern half of Attica coastline some tens of kilometers offshore, or to the coast-parallel range of Hymettos mountain, rising steeply 12 km onshore. The instrumentation consisted mainly of three tethered meteorological balloons released at characteristic sires (i.e., the coast, a location between shoreline and mountain foot and the mountain top) and three autographic ground-based anemometers operating at selected locations. Data from the ground-based and upper air stations of the Hellenic National Meteorological Service, as well as the diurnal weather maps were also obtained and analyzed. Observations were made under different synoptic wind and the latter was found to determine remarkably the significance of the topographic effects. A preliminary two-dimensional numerical approach was also made concerning the sea breeze capability to reach the Hymettos mountain top in the case of a weak opposing geostrophic flow.     

A stability study of asteroid families near the 3:1 and 5:2 resonance with Jupiter

By using theD-criterion Lindblad (1992) has identified 14 asteroid families from a sample of 4100 numbered asteroids with proper elements from Milani and Kneevi (1990). Taxonomic types and other physical properties for a significant number of objects in five of the families show strong homogeneity within each family, further strengthening their internal relationship.To test the hypothesis of a common origin in, e.g., a catastrophic collision event, we have set out to integrate the orbits of the members of the Maria, Dora and Oppavia-Gefion families over some 10⁶ years. The mean distance for the Maria family is close to the 3:1 mean-motion resonance with Jupiter, while the other two families lie close to the 5:2 resonance.We used a simplified solar system model which included the perturbations by Jupiter and Saturn only and implemented Everhart's variable stepsize integrator RA15. All close encounters between the family members (within 0.1 AU) were recorded as well. Preliminary results from integrations over 4×10⁵ years are presented here.The statistics of close encounters show pronounced peaks for several members within each family, while for others no significant levels above the background of random encounters or even very low frequencies were found. This indicates a subclustering within the families. Quite a lot of very close (<0.005 AU) mutual encounters are found, which suggest that, at least for the larger members in a family, the mutual gravitational interactions could be of some importance for the real orbital evolutions.The encounter statistics between the Dora and Oppavia family members suggest a possible interrelationship between this two groups.     

新疆地区夏季平流层低层风场特征分析及数值模拟

利用2017年6—8月的FNL再分析资料分析了新疆地区夏季平流层低层风场的时空演变特征，开展了平流层低层风场的高分辨率数值模拟和检验。结果表明：新疆地区夏季平流层纬向风随时间的变化存在经向差异，同时准零风层开始和结束的时间也存在经向差异，准零风层开始时间南部地区早于北部地区，而准零风层结束时间则相反。整个夏季新疆地区上空的准零风层处于70～40 hPa之间，其高度随时间呈先降低而后升高的变化趋势。准零风层数值模拟结果表明，模拟的准零风层参数与探空资料分析结果相比二者存在一致的变化趋势，准零风层起始高度的平均绝对误差为467 m，该高度对应的风速均方根误差为1.75 m/s。     

基于土地适宜性评价与元胞自动机模型的城市开发边界划定方法

城市开发边界的划定可以在一定程度上引导城市空间的良性扩张。为了研究边界划定的方法,以我国某港口城市作为研究区域,在空间增长模拟的方向进行探索。研究中借助土地适宜性评价和元胞自动机边界工具,构建既符合生态资源环境要求又符合城市发展需要的边界划定,同时,为了实现城市用地健康和动态管控举措,提出了建立健全土地用地管理机制的要求。