三维地震小面元采集技术在晋城矿区的应用

依托“西部煤炭资源高精度三维地震勘探技术”工程,对晋城矿区进行了旨在提高小断层,小陷落柱探测能力的高密度三维地震勘探。根据面元选择因素及该区地质任务,采用5m×5m网格进行野外数据采集;考虑炮检距、方位角、覆盖次数、排列片横纵比及煤层埋深（350～500m）等因素,采用中点放炮、60道接收,24次覆盖（横向4次,纵向6次）的8线16炮束状观测系统,基岩中激发。原始资料经同一处理流程后,获得5m×5m×1ms、5m×10m×1ms、10m×10m×1ms及2.5m×2.5m×1ms不同单元的三维数据体多个,通过对比可以发现小断层,小陷落柱在其小面元叠加时间剖面、顺层切片及相干切片都有清晰的反映。实例说明,小面元采集技术可以提高对小构造的纵、横向分辨能力,满足山区对三维地震精确勘探的要求。     

小面元三维地震勘探技术在西山屯兰矿南五采区的应用

屯兰矿南五采区地形复杂,最大高差达271m,地表大面积为第四系黄土覆盖,激发困难。为探索研究小面元三维地震勘探技术的应用效果。在常规三维地震勘区域内划出1km^2,采用5m×5m小面元进行采集。在地震数据采集过程中,采取了加大激发井深、提高覆盖次数、减小CMP面元网格和加大接收排列等技术措施,做到“四小三高、二中一深、两个等高面”。通过插值、抽线及扩大面元处理。获得2．5m×2．5m×1ms、5m×5m×1ms、5m×10m×1ms、10m×10m×1ms以及不同叠加次数的三维数据体。资料解释工作主要是在5m×5m×1ms、2．5m×2．5m×1ms两个数据体上进行,解释落差大于或等于5m的断层6条,落差3～5m的断层8条;查明长轴直径20～30m的陷落柱4个。30～100m的陷落柱1个,大于100m的陷落柱3个。与相邻区常规三维地震比较,小面元三维地震勘探有利于对小陷落柱、小断层的控制和解释。     

Geochemistry of magmatic rocks of the Koksharovka alkaline-ultrabasic massif,primorye, and results of trace-element modeling

New geochemical data are presented on the magmatic rocks of the Late Jurassic Koksharovka alkaline-ultrabasic massif, which is associated with deposits of vermiculite, apatite, V-bearing titanomagnetite, and placer isoferroplatinum. The REE geochemistry and strontium, oxygen, and carbon isotopic composition of carbonatites and related ijolites and pyroxenites, together with geological observations, point to the magmatic origin of the Koksharovka carbonatites. The origin of associated magmatic rocks is discussed. Trace element modeling of partial melting of mantle sources was conducted to decipher the genesis of the melts of the Koksharovka carbonatites and host titanite-kaersutite pyroxenites.     

数值模拟技术在海坨子油田开发调整研究中的应用

讨论分析数值模拟技术在海坨子油田开发调整研究中的思路和方法,采用美国Landmark公司VIP2003．4版本数值模拟软件包进行模拟研究,通过参数准备,静、动态拟合,模拟出海坨子油田海S9—11井组1—9砂组各小层剩余储量大小及不同阶段流体饱和度分布,结合可视化技术形象描述了海坨子油田剩余油变化规律及潜力区,在此基础上预测不同井网加密方式开发指标,并优选出最佳方案,为海坨子油田下步开发调整提供了重要依据,取得了较好的效果。     

Changing grading of soil: effect on critical states

Examples of situations are presented where the grading of a soil changes during its lifetime either by crushing of particles leading to an increase of fine material or by slow transport of fine particles with seepage leading to a decrease of fine material. Such grading changes influence the basic constitutive properties of the soil, in particular properties such as critical states which are dependent on the available range of densities of packing. Discrete element modelling is used to show the dependence of critical state conditions on grading and the way in which the particle assembly seeks out new critical state conditions as the grading changes.     

CSU－RAMS模式在区域气侯模拟中的应用

将ＣＳＵ－ＲＡＭＳ（中尺度）数值模式改造成“区域气候数值模式”以及进行区域气候数值模拟的试验研究。说明将有限区域中尺度数值模式与ＧＣＭ模式嵌套应用到区域气候数值模拟研究上能够取得有意义的结果。它能在一定程度上改善ＧＣＭ模式的不足。可以更为细致地描述大气环流的变化特征,是了解区域气候变化的有效方法之一。     

The propagation of a single shear crack: A displacement discontinuity model

Numerical studies using the displacement discontinuity method show that a single shear crack under compression propagates in its own direction, because such propagation results in the maximum release of strain energy. The methods of linear elastic fracture mechanics may not be used for such a closed crack, and the stress intensity factors are meaningless in that case. Laboratory observations of propagation by means of kinks at an angle of approximately 70° to the crack may be due to heterogeneities, to the effect of a preexisting crack, to end effects, to microcracking, or to some combination of these factors. Such kinks may thus be local phenomena which cannot release most of the strain energy, and are not incompatible with our numerical results which are based on a global energy balance.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Blind prediction of the site effects at Ashigara Valley,Japan, and its comparison with reality

Weak and strong ground motions were numerically predicted for three stations of the Ashigara Valley test site. The prediction was based on the records from a rock-outcrop station, one weak-motion record from a surface-sediments station, and the standard geotechnical model. The data were provided by the Japanese Working Group on the Effects of Surface Geology as a part of an international experiment. The finite-difference method for SH waves in a 2-D linear viscoelastic medium (a causalQ model) was employed.Comparison with the real records shows that at two stations the predictions fit better than at the third one. Strangely, the two better predictions were for stations situated at larger distances from the reference rock station (one station was on the surface, the other in a borehole). The strong ground motion (the peak acceleration of about 200 cm s^–2) was not predicted qualitatively worse than the weak motion (8 cm s^–2). A less sophisticated second prediction (not submitted during the experiment), in which we did not attempt to fit the available weak-motion record at the sedimentary station, agrees with the reality significantly better.     

Information structure analysis for quantitative assessment of mineral resources and the discovery of a silver deposit

We propose an information-structure-analysis (ISA) method to quantify the correlations between quantitative and qualitative variables as well as within each type of variable. This method is applied to the evaluation of mineral resources in the western Zheijiang Province of China. The district contains a number of silver-bearing Fe–Cu–Pb–Zn mineral deposits near igneous complexes and FeCuPbZn zones away from the complexes. Silver anomalies occur not only in the known Fe–Cu–Zn–Pb deposits, but also in the country rock, suggesting the possible existence of silver deposits far from the igneous complexes.The tonnage distribution of silver is modeled by Monte Carlo simulation. This simulation is conducted on the basis of the correlations between silver (Ag) and lead (Pb), since no known data on silver is available. The known tonnage distribution of lead in 11 control cells was used to approximate the tonnage distribution of silver in the Monte Carlo simulation. With ISA and Monte Carlo methods, the total amount of potential polymetallic resources in 49 cells in the western Zhejiang Provice is predicted. Significantly, a deposit with about 24 tonnes of silver has been found within our exploration target area.