Comparison between polar regions of Mars from HEND/Odyssey data

In this paper, we have analyzed neutron spectroscopy data gathered by the High Energy Neutron Detector (HEND) instrument onboard Mars Odyssey for comparison of polar regions. It is known that observation of the neutron albedo of Mars provides important information about the distribution of water-ice in subsurface layers and about peculiarities of the CO₂ seasonal cycle. It was found that there are large water-rich permafrost areas with contents of up to ∼50% water by mass fraction at both the north and south Mars polar regions. The water-ice layers at high northern latitudes are placed close to the surface, but in the south they are covered by a dry and relatively thick (10-20 cm) layer of soil. Analysis of temporal variations of neutron flux between summer and winter seasons allowed the estimation of the masses of the CO₂ deposits which seasonally condense at the polar regions. The total mass of the southern seasonal deposition was estimated as 6.3×¹⁰¹⁵ kg, which is larger than the total mass of the seasonal deposition at the north by 40-50%. These results are in good agreement with predictions from the NASA Ames Research Center General Circulation Model (GCM). But, the dynamics of the condensation and sublimation processes are not quite as consistent with these models: the peak accumulation of the condensed mass of CO₂ occurred 10-15 degrees of Ls later than is predicted by the GCM.     

A coupled microphysical/radiative transfer model of albedo and emissivity of planetary surfaces covered by volatile ices

A new model of albedo and emissivity of planetary surfaces covered by volatile ices in the form of porous slab-like deposits is described. In the model, a radiative transfer model is coupled with a microphysical model in order to link changes in albedo and emissivity to changes in porosity caused by ice metamorphism. Preliminary results for Triton, Pluto, and Io are presented (the martian CO₂ caps will be the subject of a separate publication). The coupled model will aid in the interpretation of ground-based and spacecraft observations and should lead to advances in surface and atmospheric modeling.     

Longevity of fluorine-bearing tremolite on Venus

There is a general belief that hydrous minerals cannot exist on Venus under current surface conditions. This view was challenged when Johnson and Fegley (2000, Icarus 146, 301-306) showed that tremolite (Ca₂Mg₅Si₈O₂₂(OH)₂), a hydrous mineral, is stable against thermal decomposition at current Venus surface temperatures, e.g., 50% decomposition in 4 Ga at 740 K. To further explore hydrous mineral thermal stability on Venus, we experimentally determined the thermal decomposition kinetics of fluorine-bearing tremolite. Fluor-tremolite is thermodynamically more stable than OH-tremolite and should decompose more slowly. However how much slower was unknown. We measured the decomposition rate of fluorine-bearing tremolite and show that its decomposition is several times to greater than ten times slower than that of OH-tremolite. We also show that F-bearing tremolite is depleted in fluorine after decomposition and that fluorine is lost as a volatile species such as HF gas. If tremolite ever formed on Venus, it would probably also contain fluorine. The exceptional stability of F-bearing tremolite strengthens our conclusions that if hydrous minerals ever formed on Venus, they could still be there today.     

Analytical solutions of one‐dimensional infiltration before and after ponding

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Fresnel modeling of hematite crystal surfaces and application to martian hematite spherules

The gray crystalline hematite at Meridiani Planum first discovered by the Mars Global Surveyor Thermal Emission Spectrometer (MGS-TES) instrument occurs as spherules that have been interpreted as concretions. Analysis of the TES and mini-TES spectra shows that no 390 cm⁻¹ feature is present in the characteristic martian hematite spectrum. Here, we incorporate the mid-IR optical constants of hematite into a simple Fresnel reflectance model to understand the effect of emission angle and crystal morphology on the presence or absence of the 390 cm⁻¹ feature in an IR hematite spectrum. Based on the results we offer two models for the internal structure of the martian hematite spherules.     

Weibull statistical analysis of granite bending strength

Summary  This paper describes and discusses the adequacy of Weibull statistical analysis to analyse the bending strength of granite. The experimental results show that strength variability is related with a specific origin of failure. This conclusion is based on analysing the influence of the surface condition (extrinsic defects) on the bending strength results treated by the Weibull statistics. The conclusions drawn from this study have been validated by analysing the results of the critical flaw dimension estimated by applying the linear elastic fracture mechanics (LEFM) formulae. Results obtained from fractographic examination also have been used to describe the location of the origin of the fracture and understand the distribution of defects; i.e., there is a unimodal distribution of defects (intrinsic defects), despite the fact that some outlier values are normally observed in the fractured surfaces. Correspndence: P. M. Amaral, Department of Materials Engineering, Instituto Superior Técnico, Technical University of Lisbon, Av. Rovisco Pais, 1049-001 Lisboa, Portugal     

引水工程秦巴段隧洞地应力模拟及工程地质问题

利用Ansys有限元软件对三峡引水工程秦巴段线路不同深度、不同截面形态隧洞围岩的应力重分布情况进行模拟计算,得到圆形隧洞、城门形隧洞和马蹄形隧洞围岩的应力数值和等值线图.利用库仑一纳维尔强度准则,对花岗岩区及灰岩区隧洞围岩的剪切破坏进行分析;利用三种岩爆应力判别指标,对岩爆进行初步预测;进而对不同深度、不同截面形态的隧洞围岩的稳定性进行分析;最后对引水工程隧洞设计中截面形态的选择给出了初步建议.     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran