基于球面退化四叉树格网的GlobeLand30数据表达及精度分析

Globe Land30为我国研制的世界上首套全球30 m地表覆盖数据集。该数据采用传统的通用横轴墨卡托投影(UTM)组织数据。为了解决地图投影给全球性问题带来的空间数据断裂及几何变形等问题,本文以球面退化四叉树格网(DQG)为基础,构建一种Globe Land30的全球连续表达模型;并选择相应的精度评价指标,对基于DQG模型表达的几何变形、数据误差的空间位置分布及定量化进行研究。结果表明:基于DQG模型既能保证Globe Land30数据表达的全球连续性,又能保持原有的数据精度,为Globe Land30在全球空间数据的可视化连续表达与深度分析提供了基础。     

模拟地震波场的伪谱和高阶有限差分混合方法

伪谱法是一种高效、高精度计算非均匀介质地震波传播的数值方法,但是由于它的微分算子的全局性,使得该方法不适用于分散内存的并行计算.本文将有限差分算子的局部性和伪谱法算子的高效、高精度相结合,发展基于两种方法的伪谱/有限差分混合方法.该方法在一个空间坐标方向上利用交错网格高阶有限差分算子,在另外的空间坐标方向上利用交错网格伪谱法算子,既保留了后者的高效、高精度优势,又便于在PC集群上实现并行计算.对二维模型的计算显示,混合方法能有效处理介质不连续面,在保证伪谱法计算精度的情况下,提供了一种并行计算的可能途径.     

栅格化属性精度损失的评估方法及其尺度效应分析——以四川省1:25 万土地覆被数据为例

选择在600 m~30 km 16 个尺度上,在ArcGIS 中利用常用的面积最大值法(Rule ofMaximum Area,RMA) 对2005 年四川省1:25 万土地覆被矢量数据进行栅格化,并采用两种属性精度损失评估方法：传统的常规分析方法和一种新的基于栅格单元分析方法,来对比分析在这两种评估方法下RMA栅格化的属性(这里是指面积) 精度损失随尺度的变化特征。结果表明：(1) 在同一尺度下采用基于栅格单元方法分析所得的研究区平均属性精度损失大于常规分析方法分析得到的平均属性精度损失,且二者之间的差异在1~10 km内很明显,当栅格单元大于10km时,两种方法得到的平均属性精度损失的差值稳定,且其随尺度的变化曲线趋于平行;(2) 基于栅格单元分析方法不仅能够准确地定量估计RMA栅格化的属性精度损失,而且能客观地反映属性精度损失的空间分布规律;(3) 对四川省1:25 万土地覆被数据进行面积最大值法(RMA)栅格化的适宜尺度域最好不要超过800 m,在该尺度域内数据工作量适宜,且RMA栅格化属性精度损失小于2.5%。     

协同式电网规划系统设计

利用GIS技术进行电网管理和规划是实现电力信息化、建设数字电力的必由之路。论文在分析电网规划的特点基础上,将计算机支持的协同工作思想引入电网规划设计中,以ArcSDE GeoDatabase的版本操作和基于权限控制的数据表技术,作为空间数据协同操作和业务属性数据协同操作的技术基础,建立了协同式电网规划系统,系统的实践应用证明了系统的高效性和先进性。     

Mountain Glacier Flow Velocities Analyzed from Satellite Optical Images

Mountain glaciers are sensitive to environment. It is important to acquire ice flow velocities over time for glacier research and hazard forecast. For this paper, cross-correlating of optical images is used to monitor ice flow velocities, and an improvement, which is called ＂moving grid,＂ is made to this method. For this research, two remote-sensing images in a certain glacier area, dur-ing different times are selected. The first image is divided into grids, and we calculated the correlation coefficient of each window in the grid with the window on the second image. The window with the highest correlation coefficient is considered the counter-part one on the first image. The displacement of the two corresponding windows is the movement of the glacier, and it is used to calculate glacier surface velocity. Compared to the traditional way of dividing an image with ascertain grid, this method uses small steps to move the grid from one location to another adjacent location until the whole glacier area is covered in the image, thus in-creasing corresponding point density. We selected a glacier in the Tianshan Mountains for this experiment and used two re-mote-sensing images with a 10-year interval to determine this method.     

Grid-size dependence of Cauchy boundary conditions used to simulate stream–aquifer interactions

This work examines the simulation of stream–aquifer interactions as grids are refined vertically and horizontally and suggests that traditional methods for calculating conductance can produce inappropriate values when the grid size is changed. Instead, different grid resolutions require different estimated values. Grid refinement strategies considered include global refinement of the entire model and local refinement of part of the stream. Three methods of calculating the conductance of the Cauchy boundary conditions are investigated. Single- and multi-layer models with narrow and wide streams produced stream leakages that differ by as much as 122% as the grid is refined. Similar results occur for globally and locally refined grids, but the latter required as little as one-quarter the computer execution time and memory and thus are useful for addressing some scale issues of stream–aquifer interactions. Results suggest that existing grid-size criteria for simulating stream–aquifer interactions are useful for one-layer models, but inadequate for three-dimensional models. The grid dependence of the conductance terms suggests that values for refined models using, for example, finite difference or finite-element methods, cannot be determined from previous coarse-grid models or field measurements. Our examples demonstrate the need for a method of obtaining conductances that can be translated to different grid resolutions and provide definitive test cases for investigating alternative conductance formulations.     

基于纤维模型的空间网架支承体系的优化设计与分析

近年来,民用航空制造业的快速发展给大柱距空间网架结构带来新的契机。本文针对某大柱距厂房设计了无柱间支撑、柱间钢支撑和柱间消能支撑3种抗侧力结构体系。在此基础上,分别建立了3种结构体系的三维整体有限元模型,通过优化设计确立了钢支撑和消能支撑的具体设计参数,并进行了多遇地震作用下的弹性时程对比分析。最后,建立了结构弹塑性分析的纤维模型,对3种结构体系进行了罕遇地震作用下的弹塑性时程分析,对比研究了3种结构体系在大震作用下的倒塌机制。结果表明：采用纤维模型能够较为精确地进行结构的弹塑性时程分析;相较于不加柱间支撑结构体系,柱间钢支撑和柱间消能支撑结构体系在多遇地震作用下的结构层间位移分别衰减约32%和64%,在罕遇地震作用下的结构层间位移分别衰减约12%和46%,且均具有更好的倒塌机制。本文可供大柱距空间结构的设计与分析参考和借鉴。     

Banach空间中非扩张映像的强收敛性

在实光滑和一致凸Banach空间中通过引入广义度量投影,证明了一个关于非扩张映像的修正Mann迭代序列的强收敛性定理。目的是利用广义度量投影来修改Nakajo与Takahashi的迭代方案,并将Nakajo与Taka—hashi文中所对应的主要结果由Hilbert空间推广到实光滑和一致凸Banach空间。     

层状地基中空沟对交通荷载的竖向隔振分析

空沟是一种常用的连续隔振屏障,可以有效地降低人工振动。以位移为变量的二维格子法在波动问题计算中具有良好的适应性、高效性,兼备有限元与差分法的一些优点,应用该法针对层状地基中作用于路堤上的交通荷载引起振动的空沟竖向隔振问题进行了参数研究,分别考虑了上软下硬地基和上硬下软地基两种情况。研究结果表明：空沟宽度对隔振效果的影响较小;空沟深度与空沟的位置是影响隔振效果的关键因素,它们相互关联,其取值应综合考虑;在上述两类层状地基中,若空沟深度与上层土的厚度接近或相等均对竖向隔振不利;路堤高度越大对竖向隔振效果越不利。     

DEVELOPMENT OF EARTHQUAKE EMERGENCY DISASTER INFORMATION PRE-EVALUATION DATA BASED ON KM GRID

After an earthquake, earthquake emergency response and rescue is one of the effective ways to reduce casualties from the earthquake. Earthquake emergency disaster information is one of crucial factors to effectively guide the rescue work. However, there is a "black box effect" on the emergency disaster information acquisition after an earthquake, which means real-time earthquake disaster information is insufficient. Hazard estimates are usually used as a substitute for the real-time disaster information in the "black box" period. However, it is subject to the accuracy and speed of the estimation. The development of the km grid technology provides good prospect to solve this problem. The paper suggests to develop earthquake disaster information pre-estimation data with the support of the km grid technology. The definition and source of the pre-estimation data are introduced and its possibility in improving the estimation speed and accuracy are analyzed theoretically. Then, we elaborate the calculation model of the pre-estimation data. The framework of the model includes disaster-bearing body data, disaster-causing factors used in calculation and calculation formula. The disaster-bearing body data in km grid format are introduced, including population data in km grid format and building data in km grid format. Then the four elements of the earthquake(earthquake occurrence time, earthquake location, earthquake magnitude and focal depth)are selected as disaster-causing factors for calculation. Map algebra method is used to realize the calculation model in which calculation parameters are associated with base map in the km grid format. So the pre-estimation data are developed by python and ArcGIS, which includes building damage dataset(100 layers), death toll dataset(10 layers)and direct economic loss dataset(5 layers). Finally, the pre-estimation data based method for earthquake emergency disaster information estimation is presented. With the support of this method, two real earthquake cases are used to validate the effect of the pre-estimation data. The validation results show the pre-estimation data can not only significantly improve the speed of the estimation but also greatly improve the accuracy of the estimation. Another good result is found in the validation process that with the support of the pre-estimation data, the estimated result can display the spatial distribution of the disaster information, which will effectively aid earthquake emergency response and rescues.