泥晶灰岩地层孔壁坍塌掉块现象及处理

在灰岩地区钻探施工过程中，常见孔壁坍塌、掉块现象，尤其在含泥晶灰岩地层分布区钻进过程中，这种现象尤为突出，轻则影响钻探施工效率，重则造成钻探孔内事故。针对孔内坍塌、掉块现象的征兆及特点，提出了相对应的处理办法。     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

非等截面桩超声波成孔质量检测

分析了非等截面超声波成孔质量检测的几个主要影响因素,给出了相应得改进措施。用工程实例说明超声波反射技术是一种保证非等截面桩成孔质量和成桩质量必不可少的检测方法。     

利用钻孔超声成像的图像特征进行岩石风化程度分类

钻孔超声成像方法能精确地反映井壁的光滑情况, 进而判断岩石的风化发育程度, 确定风化层的厚度。阐述了钻孔超声成像的走时和振幅图像特征, 给出了1个在香港地区的应用实例。     

超声与振荡提取沉积物中松散结合态磷的比较

用超声技术提取沉积物样品中松散结合态磷,并与振荡提取结果进行比较。结果表明,超声提取结果与振荡提取结果大致相当。超声提取耗时短,操作简单易行,测试结果精密度为3.8%(RSD,n=7),可以替代振荡方法提取沉积物中的松散结合态磷。     

中国大陆科学钻探主孔声发射法现今地应力状态的确定

对中国大陆科学钻探主孔的岩心进行了声发射测量,确定了301～1531m深度的最大主应力。并与钻孔崩落法(深度1269～1655m)测量结果进行了对比,结果表明,声发射测量所得测值基本上落在钻孔崩落法测值的趋势线上,两种方法所得结果一致,说明测量结果可信。测量结果表明科学钻探主孔地应力大小随深度增加,在浅部301m最大主应力为13.4MPa,在深部1655m为55.2MPa。随深度的增加率为0.0279MPa/m。最大主应力方向为N54°±3.3°E,且方向不随深度变化。     

煤田勘查超千米深孔快速钻进技术探讨

针对目前国内煤田勘查主要机具及工艺技术方法存在的主要问题,结合煤田勘查地层地质条件和超千米深孔施工要求,研制了液压立轴式HTJ-2000型钻机和新型绳索取心钻具,并就配套设备选型、钻进工艺、钻进参数、泥浆指标及应用效果进行了阐述.该项技术的应用,已明显提高了钻效,使钻孔深度达到1 350m.     

声波扫描成像在灾害防治及环境保护中的应用

利用超声波扫描成像测井技术，在地质灾害的预防与环境保护中可以检测由于采矿而形成的冒落带、裂隙带、离层带、洞穴及软弱层的存在状况及部位，测定基岩风化蚀变程度及深度，在地质灾害与环境保护的治理时可以监测治理的质量，提供了直观精确可靠的基础资料。