麻粒岩区构造地质编图原则探讨

麻粒岩区的边界及亚区划分标志常为等变线、断层或剪切带。主要地质单元包括灰色片麻岩、花岗片麻岩、混合岩、副变质表壳岩、层状侵入体、高级变质绿岩等，基性岩墙群为划分不同地质单元、建立其相对时序的重要标志。以上单元普遍被构造叠置，常可识别出侵入关系。表壳岩系底部不整合及地层层序的研究对于认识大陆克拉通化过程及沉积环境演化具有重要意义。早期大规模水平构造先后被两类变形序列叠加，第１类与麻粒岩相变质发生于同     

P–T–X relationships in the Precambrian Al–Mg-rich granulites from In Ouzzal, Hoggar, Algeria

The Al–Mg-rich granulites from the In Ouzzal craton, Algeria, show a great diversity of mineral reactions which correspond to continuous equilibria as predicted by phase relationships in the FeO–MgO–Al₂O₃–SiO₂ system. The sequence of mineral reactions can be subdivided into three distinct stages: (1) a high-P stage characterized by the growth of coarse mineral assemblages involving sapphirine and the disappearance of early corundum and spinel-bearing assemblages; (2) a high-T stage characterized by the development of Sa–Qz-bearing assemblages; and (3) a later stage, in which garnet-bearing assemblages are replaced by more or less fine symplectites involving cordierite. During the course of early mineral reactions, the distribution coefficient, K_d, between the various ferromagnesian phases decreased significantly whereas Al₂O₃ in pyroxene increased concomitantly. These observations, when combined with topological constraints, clearly indicate that the high-P stage 1 was accompanied by a significant rise in temperature (estimated at 150 ± 50° C) under near isobaric conditions, in agreement with the reaction textures. By stage 2, pressure and temperature were extreme as evidenced by the low K_d value between orthopyroxene and garnet (K_d= 2.06–1.99), the high alumina content in pyroxene (up to 11.8%) and the high magnesium content in garnet [100 Mg/(Mg + Fe) = 60.6]. Mineral thermometry based on Fe–Mg exchange between garnet and pyroxene and on Al-solubility in pyroxene gives temperatures close to 970 ± 70° C at 10 ± 1.5 kbar. These results are in agreement with the development of Sa–Qz assemblages on a local scale. Late mineral reactions have been produced during a decompression stage from about 9 to 6 kbar. Except for local re-equilibration of Mg and Fe at grain boundaries, there is no evidence for further reactions below 700° C. We interpreted the whole set of mineral reactions as due to changes in pressure and temperature during a tectonic episode located at c. 2 Ga. Because of the lack of evidence for further uplift after the thermal relaxation which occurred at c. 6 kbar, it is possible however that the exhumation of this granulitic terrane occurred in a later tectonic event unrelated to its formation.     

High-pressure and ultrahigh-temperature metamorphism at Komateri, northern Madurai Block, southern India

We report for the first time the evidence for prograde high-pressure (HP) metamorphism preceding a peak ultrahigh-temperature (UHT) event in the northernmost part of the Madurai Block in southern India. Mg–Al-rich Grt–Ged rocks from Komateri in Karur district contain poikiloblastic garnet with numerous multi-phase inclusions. Although most of the inclusion assemblages are composed of gedrite, quartz, and secondary biotite, rare staurolite + sapphirine and spinel + quartz are also present. The X_Mg (=Mg/[Fe+Mg]) of staurolite (0.45–0.49) is almost consistent with that reported previously from Namakkal district in the Palghat–Cauvery Shear Zone system (X_Mg = 0.51–0.52), north of the Madurai Block. The HP event was followed by peak UHT metamorphism at T = 880–1040 °C and P = 9.8–12.5 kbar as indicated by thermobarometric computations in the Grt–Ged rock and associated mafic granulite. Symplectic intergrowth of spinel (X_Mg = 0.50–0.59, ZnO < 1.7 wt.%) and quartz, a diagnostic indicator of UHT metamorphism, probably formed by decompression at UHT conditions. The rocks subsequently underwent retrograde metamorphism at T = 720–760 °C and P = 4.2–5.1 kbar. The P–T conditions and clockwise exhumation trajectory of the Komateri rocks, comparable to similar features recorded from the Palghat–Cauvery Shear Zone system, suggest that the Madurai Block and the Palghat–Cauvery Shear Zone system underwent similar HP and UHT metamorphic history probably related to the continent–continent collision during the final stage of amalgamation of Gondwana supercontinent.     

Age and duration of ultrahigh-temperature metamorphism in the Anápolis–Itauçu Complex, Southern Brasília Belt, central Brazil – constraints from U–Pb geochronology, mineral rare earth element chemistry and trace-element thermometry

Integrated petrographic and chemical analysis of zircon, garnet and rutile from ultrahigh‐temperature (UHT) granulites in the Anápolis–Itauçu Complex, Brazil, is used to constrain the significance of zircon ID‐TIMS U–Pb geochronological data. Chondrite‐normalized rare earth element (REE) profiles of zircon cores have positive‐sloping heavy‐REE patterns, commonly inferred to be magmatic, whereas unambiguous metamorphic grains and overgrowths have flat to slightly negatively sloping heavy‐REE patterns. However, in one sample, a core of zircon interpreted as having formed prior to garnet crystallization and a metamorphic zircon formed within microstructures involving garnet breakdown both display elevated heavy‐REE (and Y) with positive‐sloping patterns. D_REE(zrc/grt) partition coefficients suggest an approximation to equilibrium between zircon and garnet cores, although progressive enrichment in heavy REE towards garnet rims occurs in two of the samples investigated. Titanium‐in‐zircon thermometry indicates zircon growth during both the prograde and post‐peak evolution, but not at peak temperatures of the UHT metamorphism. By contrast, zirconium‐in‐rutile thermometry of inclusions armoured by garnet records crystallization temperatures, based on the upper end of the interquartile range of the data, of ～890 to 870 °C and maximum temperature around 980 °C, indicating prograde and retrograde growth close to and after peak conditions. Rutile located in retrograde microstructures records crystallization temperatures of 850 to 820 °C. Rutile intergrown with ilmenite and included within orthopyroxene, which is associated with exsolved zircon, records temperatures ～760 °C, consistent with Ti‐in‐zircon crystallization temperatures. ID‐TIMS U–Pb geochronological data from two of the four samples investigated define upper intercept ages of 641.3 ± 8.4 Ma (MSWD 0.91) and 638.8 ± 2.5 Ma (MSWD 1.03) that correlate with periods of zircon growth along the prograde segment of the P–T path. Individual zircon U–Pb dates retrieved from all samples range from 649 to 634 Ma, indicating a maximum duration of c. 15 Myr for the UHT event. This period is interpreted as recording modest thickening of hot backarc lithosphere located behind the Arenópolis Arc at the edge of the São Francisco Craton consequent upon terminal collision of the Parána Block with the arc during the amalgamation of West Gondwana.     

Internally consistent calibrations for geothermobarometry of high-grade Mg-Al rich rocks in the system MgO-Al2O3-SiO2 and their application to sapphirine-spinel granulites of Eastern Ghats, India and Enderby Land, Antarctica

Sixty-three internally consistent geothermobarometers for mineral equilibria involving sapphirine (2:2:1 and 7:9:3), pyrope, cordierite, enstatite, Mg-tschermak orthopyroxene, quartz, spinel and sillimanite have been calibrated in the MAS system. The updated thermodynamic data of these minerals are consistent, within limits of error, with highP-T experiments on several mineral equilibria and calorimetric data. TheP-T conditions of the granulite facies metamorphism, spanning a range of 700 to more than 1000°C and 4 to more than 10 kbar, can be estimated simultaneously from these geothermobarometers andP-T-t trajectories can be deduced from the reaction coronas well preserved in these rocks because of the refractory nature of aluminous phases. The geothermobarometers have been applied to sapphirine-spinel granulites of Eastern Ghats and Enderby Land. TheP-T conditions of metamorphism (a-prograde/thermal peak and b-retrograde isothermal/isobaric decompression/cooling) estimated for these granulites are: (1) Eastern Ghats (Visakhapatnam): Paderu- (a) 900°C/8.3kbar, (b-1) 900°C/6.8kbar and (b-2) 740°C/5.4 kbar; Anantgiri- (a) prograde anticlockwise 930°C/6.2 kbar and (b) 870°C/6.8 kbar, 820°C/6.1 kbar; Anakapalle- (b) 845°C/8.5-6.2 kbar; and Araku- (b) 840°C/6.2 kbar to 795°C/5.9 kbar. Enderby Land (Napier complex): Spot height 945, Tula Mts.- (a) 970°C/9.1 ± 0.6 kbar, isobaric cooling (b) 885°C/ 7.75 kbar, isothermal decompression (b) 880°C/6.85 kbar; Mt. Hardy, Tula Mts.- (b) 885°C/6.75 kbar; Mt. Riiser-Larsen, Amundsen bay- (a) 1000°C/7.0 kbar prograde anticlockwise; Mt. Sones- (b) 920°C/ 6.8 kbar; Forefinger Point, SW Enderby Land- (b) 840°C/6.7 kbar, 810°C/6.5 kbar and 775°C/5.0 kbar. The estimatedP-T andP-T-t are mostly consistent with those inferred from the granulites of these areas.     

Evolution of Moldanubian rocks in Austria: review and synthesis

The Moldanubian zone in Austria comprises three major lithological units. Despite general agreement that nappe tectonics contributed to its current structure, the number and position of tectonic boundaries, or continental pieces that were involved in its evolution, as well as the age, extent and position of oceanic sutures are disputed. Recent models ascribe the Moldanubian tectonostratigraphic structure to its oblique, N- to NE-directed collision with Moravia only. The rocks of the Moldanubian Bunte series and Gföhl unit experienced a common, intensive overprint in the range 700–800 °C and 8–11 kbar. Textural evidence suggests that this overprint was attained during nearly isothermal decompression, so the rocks experienced higher pressures prior to this overprint. These conditions constrain a continent–continent collision environment that contributed to the formation of the Moldanubian granulites. The estimated metamorphic temperatures are close to T_max. During this Hercynian, high-T overprint, the minerals underwent extensive diffusion-controlled homogenization of elements. The early stages of retrogression of these units were characterized by isobaric cooling at c. 6 kbar in the range 650–500 °C that is related to the oblique collision of the Moldanubian and Moravian zones. Cooling to c. 400 °C is demonstrated by unstrained, diasporized corundum inclusions in garnet of common Moldanubian granulites. The available age data (including cooling ages) from metamorphic rocks show a very wide variation between 490 and 280 Ma that depends on sample characteristics and the dating method used. They demonstrate clearly, however, that the metamorphic overprint is Hercynian. The possibility that the large variation in ages reflects homogenization, resetting and closure of the isotopic systems attained at different, sample- and method-specific times is discussed. Age data varying between c. 370 and c. 346 Ma tentatively date different stages during the Hercynian, high-T decompression. The majority of zircon and monazite U/Pb ages as well as the hornblende and muscovite Ar/Ar cooling ages cluster between c. 345 and c. 326 Ma and date the effective closure conditions and the onset of rapid, nearly isobaric cooling. The continent–continent collision that formed the granulites pre-dates c. 370 Ma. The intra-Moldanubian nappe-stacking pre-dates thrusting of the Moldanubian zone over the Moravian zone. The range c. 340–335 Ma is the lower limit for completion of tectonic activity in the Moldanubian zone. The Moldanubian series are post-tectonically intruded by granitoids of the Southern Bohemian Pluton. Recent age determinations and geochemical evidence suggest that the formation of the early granitoid types took place in the lower crust in connection with the Hercynian high-grade overprint. The Moldanubian Monotone series in Austria is separated from the other Moldanubian units by a conspicuous tectonic horizon. It also differs from them by its characteristic high-T , low-P overprint, which is best demonstrated by a widespread cordierite gneiss.     

Growth of plagioclase rims around metastable kyanite during decompression of high‐pressure felsic granulites (Bohemian Massif)

Samples of high‐pressure felsic granulites from the Bohemian Massif (Variscan belt of Central Europe) characterized by a peak metamorphic (high‐pressure) mineral assemblage of garnet – kyanite – plagioclase – K‐feldspar – quartz ± biotite show well‐developed plagioclase reaction rims around kyanite grains in two microstructural settings. In one setting, kyanite is randomly distributed in the polyphase matrix, whereas in the other setting, it is enclosed within large perthitic K‐feldspar. Kyanite is regarded as a relict of the high‐pressure metamorphic assemblage that became metastable during transition to a low‐pressure overprint. Plagioclase rims from both microstructural settings show continuous outwards decrease of the anorthite content from An_32–25 at the contact with kyanite to An_20–19 at the contact with the matrix or to the perthitic K‐feldspar respectively. Based on mass balance considerations, it is shown that in some cases, a small amount of kyanite was consumed in the rim‐forming reaction to provide the Al₂O₃ component for the growth of plagioclase, whereas in other cases no Al₂O₃ from kyanite was necessary. In a majority of examples, the necessary Al₂O₃ was supplied with CaO and Na₂O from the surrounding matrix material. For kyanite in perthite, a thermodynamic analysis reveals that the kyanite became metastable at the interface with the host perthite at the peak metamorphic pressure, and therefore the plagioclase rim started to grow at ～ 18 kbar. In contrast, kyanite in the polyphase matrix remained stable down to pressures of ～ 16 kbar, and the plagioclase rim only started to grow at a later stage during the decompression. Plagioclase rims around kyanite inclusions within large perthite have a radial thickness of up to 50 μm. In contrast, the radial thickness of plagioclase rims around kyanite in the polycrystalline matrix is significantly larger, up to 200 μm. Another peculiarity is that the plagioclase rims around kyanite in the matrix are polycrystalline, whereas the plagioclase rims around kyanite inclusions in perthitic hosts are single crystals with the same crystallographic orientation as the host perthite. The difference in rim thickness for the two microstructural settings is ascribed to the differences in the efficiency of chemical mass transfer next to the reaction site. The comparatively large thickness of the plagioclase rims grown around kyanite in the matrix is probably due to efficient material transport along the grain and phase boundaries in the matrix. In contrast, chemical mass transfer was comparatively slow in the large perthitic K‐feldspar grains.     

Phase equilibria modelling of kyanite‐bearing anatectic paragneisses from the central Grenville Province

Kyanite‐bearing paragneisses from the Manicouagan Imbricate Zone and its footwall (high‐P belt of the central Grenville Province) preserve evidence of partial melting with development of metamorphic textures involving biotite–garnet ± kyanite ± plagioclase ± K‐feldspar–quartz. Garnet in these rocks displays a variety of zoning patterns with respect to Ca. Pseudosection modelling in the Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O (NCKFMASHTO) system using measured bulk rock compositions accounts for the textural evolution of two aluminous and two sub‐aluminous samples from the presumed thermal peak to conditions at which retained melt solidified. The prograde features are best explained by pseudosections calculated with compositions to account for melt loss. The intersection of isopleths of grossular content and Fe/(Fe + Mg) relating to large porphyroblasts of garnet provide constraints on the P–T conditions of the metamorphic peak. These P–T estimates are considered to be minima because of the potential for diffusional modification of the composition of garnet at high‐T and during the early stages of cooling. However, they are consistent with textural observations and pseudosection topology, with peak assemblages best preserved in rocks for which the calculated pseudosections predict only small changes in mineral proportions in the P–T interval, in which retrograde reactions are inferred to have occurred between the thermal peak and the solidus. Maximum P–T conditions (14.5–15.5 kbar and 840–890 °C) and steep retrograde P–T paths inferred for rocks from the Manicouagan Imbricate Zone are comparable with those determined for mafic rocks from the same area. In contrast, maximum P–T conditions of 12.5–13 kbar and 815–830 °C and flatter P–T paths are inferred for the rocks of the footwall to the Manicouagan Imbricate Zone. The general consistency between textures, mineral compositions and the topologies of the calculated pseudosections suggests that the pseudosection approach is an appropriate tool for inferring the P–T evolution of high‐P anatectic quartzo‐feldspathic rocks.     

Low-pressure Granulites of the Lisov Massif, Southern Bohemia: Visean Metamorphism of Late Devonian Plutonic Arc Rocks

The Liov Granulite Massif differs from neighbouring granulitebodies in the Moldanubian Zone of southern Bohemia (Czech Republic)in including a higher proportion of intermediate–maficand orthopyroxene-bearing rocks, associated with spinel peridotitesbut lacking eclogites. In addition to dominantly felsic garnetgranulites, other major rock types include quartz dioritic two-pyroxenegranulites, tonalitic granulites and charnockites. Minor bodiesof high-pressure layered gabbroic garnet granulites and spinelperidotites represent tectonically incorporated foreign elements.The protoliths of the mafic–intermediate granulites (quartz-dioriticand tonalitic) crystallized 360–370 Ma ago, as indicatedby laser ablation inductively coupled plasma mass spectrometryU–Pb ages of abundant zircons with well-preserved magmaticzoning. Strongly metamorphically recrystallized zircons giveages of 330–340 Ma, similar to those of other Moldanubiangranulites. For the overwhelming majority of the Liov granulitespeak metamorphic conditions probably did not exceed 800–900°Cat 4–5 kbar; the equilibration temperature of the pyroxenegranulites was 670–770°C. This is in sharp contrastto conditions of adjacent contemporaneous Moldanubian granulites,which are characterized by a distinct HP–HT signature.The mafic–intermediate Liov granulites are thought tohave originated during Viséan metamorphic overprintingof metaluminous, medium-K calc-alkaline plutonic rocks thatformed the mid-crustal root of a Late Devonian magmatic arc.The protolith resembled contemporaneous calc-alkaline intrusionsin the European Variscan Belt. KEY WORDS: low-pressure granulites; geothermobarometry; laser-ablation ICP-MS zircon dating; whole-rock geochemistry; Sr–Nd isotopes; Moldanubian Zone     

The retrograde P–T–t path for low-pressure granulites from the Reynolds Range, central Australia: petrological constraints and implications for low-P/high-T metamorphism

Several aspects of the petrogenesis of low-pressure granulite facies rocks from the Reynolds Range (central Australia) are contentious, including: (a) the shape of the retrograde P–T –time path, and whether it is an artefact of repeated thermal events at different P–T conditions; (b) the type of regional metamorphism; and (c) the causes of metamorphism. Granulite facies rocks from the Reynolds Range Group experienced three major periods of mineralogical equilibration. Metapelitic rocks underwent dehydration-melting reactions to form migmatites under peak M2 P–T conditions of c. 5.0–5.3 kbar and c. 750–800 °C. Metapsammitic rocks that did not melt during M2 show spectacular garnet–orthopyroxene intergrowths that developed at c. 3.5–3.7 kbar and c. 700–750 °C after penetrative regional deformation, but prior to amphibolite facies rehydration in discrete strike-parallel zones. Rehydration occurred within the sillimanite stability field at P–T conditions close to the granite solidus (c. 3.2–3.4 kbar and 650–700 °C). Subsequently the terrane cooled into the andalusite stability field. Geochronological constraints suggest that: (a) peak-M2 conditions were reached at c. 1594 Ma; (b) the garnet–orthopyroxene intergrowths in unmelted metapsammites probably developed between c. 1594 Ma and c. 1586 Ma; and (c) upper amphibolite facies rehydration occurred between c. 1586 Ma and 1568 Ma. The lack of petrological evidence for multiple dehydration and rehydration of the rocks suggests that the three episodes of mineralogical recrystallization can be linked to yield a single continuous retrograde P–T–t path of minor initial decompression (c. 1.5 kbar) from the M2 peak, followed by cooling (c. 100 °C) to the granite solidus over a period of c. 26 Ma. Late kyanite-bearing shear zones that dissect the terrane are unrelated to this event and formed during the c. 300–400 Ma Alice Springs Orogeny. The shape of the P–T–t path and the duration of M2 metamorphism suggests that advective heating was not the major cause of high-grade metamorphism, and that some other, longer lived heat source, such as the burial of anomalously radiogenic, pre-tectonic granites, is required.