长乐-东山构造-岩浆带中北段地质特征

从复杂的构造变形中甄别出岩浆岩的塑性流动变形,与韧性和脆-韧性变形区别,力争还原长乐—泉州沿海一带地质构造的真实面目,并探讨了该带的活动时间和构造属性。另外还对该带长期争论的澳角群进行了初步的分解,锆石SHRIMP测年数据也反映了平潭南务里一带变质岩的复杂性。     

The Quaternary Lancaster Sound trough‐mouth fan,NW Baffin Bay

The development of the Lancaster Sound Trough Mouth Fan (TMF) and glacial history in Arctic Canada were studied using a high‐resolution seismic profile across the entire fan and two piston cores. Stacked tills separated by erosion surfaces on the shelf pass seaward through till deltas into thick transparent glacigenic debris flow (GDF) deposits on the slope, separated by thin, well‐stratified glaciomarine layers. An age model was built by ties to the Ocean Drilling Program Site 645. The deepest GDF on the seismic profile was indicative of the onset of shelf‐crossing glaciation in the Early Pleistocene. The transition of the growth of Lancaster Sound TMF from an aggradational sequence (unit M) to an aggradational–progradational sequence (unit F) occurred at the Middle Pleistocene transition in glacial cyclicity. In the most recent glacial cycle, GDF sheets were deposited during Heinrich events 4 and 2 according to the correlation of the main detrital carbonate beds in two piston cores. The outmost till wedge reflects the maximum advance of the grounding glacier, far seaward of previously proposed Last Glacial Maximum ice extent. Copyright © 2011 John Wiley & Sons, Ltd.     

An improved SPH method for saturated soils and its application to investigate the mechanisms of embankment failure: Case of hydrostatic pore‐water pressure

The method of smoothed particle hydrodynamics (SPH) has recently been applied to computational geomechanics and has been shown to be a powerful alternative to the standard numerical method, that is, the finite element method, for handling large deformation and post‐failure of geomaterials. However, very few studies apply the SPH method to model saturated or submerged soil problems. Our recent studies of this matter revealed that significant errors may be made if the gradient of the pore‐water pressure is handled using the standard SPH formulation. To overcome this problem and to enhance the SPH applications to computational geomechanics, this article proposes a general SPH formulation, which can be applied straightforwardly to dry and saturated soils. For simplicity, the current work assumes hydrostatic pore‐water pressure. It is shown that the proposed formulation can remove the numerical error mentioned earlier. Moreover, this formulation automatically satisfies the dynamic boundary conditions at a submerged ground surface, thereby saving computational cost. Discussions on the applications of the standard and new SPH formulations are also given through some numerical tests. Furthermore, techniques to obtain the correct SPH solution are also proposed and discussed throughout. As an application of the proposed method, the effect of the dilatancy angle on the failure mechanism of a two‐sided embankment subjected to a high groundwater table is presented and compared with that of other solutions. Finally, the proposed formulation can be considered a basic formulation for further developments of SPH for saturated soils. Copyright © 2011 John Wiley & Sons, Ltd.     

A study of variability of annual river flow of the southern African region

Abstract

Variability of river flow is investigated in 502 river flow gauging stations in nine countries of the southern African region with a view to document the spatial variability of the river flow regimes. Those regions where there is strong evidence of declining or increasing trend in annual runoff have been identified. The study has shown that runoff in the region ranges from over 320 mm year^?1 in the Lower Zambezi and the highlands of Tanzania to less than 10 mm year^?1 in the deserts of Namibia and the Kalahari. There is also evidence of declining runoff in parts of Zambia, Angola, Mozambique and the High Veld in South Africa. The recent decline seems to have started from around 1975.     

Assessment of slope stability in cohesive soils due to a rainfall

The primary focus in this work is on proposing a methodology for the assessment of stability of natural/engineered slopes in clayey soils subjected to water infiltration. In natural deposits of fine‐grained soils, the presence of water in the vicinity of minerals results in an interparticle bonding. This effect cannot be easily quantified as it involves complex chemical interactions at the micromechanical level. Here, the evolution of strength properties, including the apparent cohesion resulting from initial suction at the irreducible fluid saturation, is described by employing the framework of chemoplasticity. The paper provides first the formulation of the problem; this involves specification of the constitutive relation, development of an implicit return mapping scheme, and the outline of a coupled transient formulation. The framework is then applied to examine the stability of a slope subjected to a prolonged period of intensive rainfall. It is shown that the water infiltration may trigger the loss of stability resulting from the degradation of material properties. Copyright © 2013 John Wiley & Sons, Ltd.     

Transpiration and plant water relations of evergreen woody vegetation on a recently constructed artificial ecosystem under seasonally dry conditions in Western Australia

Understanding transpiration and plant physiological responses to environmental conditions is crucial for the design and management of vegetated engineered covers. Engineered covers rely on sustained transpiration to reduce the risk of deep drainage into potentially hazardous wastes, thereby minimizing contamination of water resources. This study quantified temporal trends of plant water potential (ψ_p), stomatal conductance (g_s), and transpiration in a 4‐year‐old evergreen woody vegetation growing on an artificial sandy substrate at a mine waste disposal facility. Transpiration averaged 0.7 mm day^?1 in winter, when rainfall was frequent, but declined to 0.2 mm day^?1 in the dry summer, when the plants were quite stressed. In winter, the mean ψ_p was ?0.6 MPa at predawn and ?1.5 MPa at midday, which were much higher than the corresponding summer values of ?2.0 MPa and ?4.8 MPa, respectively. The g_s was also higher in winter (72.1–95.0 mmol m^?2 s^?1) than in summer (<30 mmol m^?2 s^?1), and negatively correlated with ψ_p (p < 0.05, r² = 0.71–0.75), indicating strong stomatal control of transpiration in response to moisture stress. Total annual transpiration (147.2 mm) accounted for only 22% of the annual rainfall (673 mm), compared with 77% to 99% for woody vegetation in Western Australia. The low annual transpiration was attributed to the collective effects of a sparse and young vegetation, low moisture retention of the sandy substrate, and a superficial root system constrained by high subsoil pH. Amending the substrate with fine‐textured materials should improve water storage of the substrate and enhance canopy growth and deep rooting, while further reducing the risk of deep drainage during the early stages of vegetation establishment and in the long term. Overall, this study highlights the need to understand substrate properties, vegetation characteristics, and rainfall patterns when designing artificial ecosystems to achieve specific hydrological functions. Copyright © 2011 John Wiley & Sons, Ltd.     

Modelling and observation of hedgerow transpiration effect on water balance components at the hillslope scale in Brittany

Vegetation has a major influence on the water and energy balance of the earth's surface. In the last century, human activities have modified land use, inducing a consequent change in albedo and potential evapotranspiration. Linear vegetation structures (hedgerows, shelterbelts, open woodland, etc) were particularly abundant but have declined considerably over the past several decades. In this context, it is important to quantify their effect on water and energy balance both on a global scale (climate change and weather prediction) and on a local scale (soil column, hillslope and watershed). The main objective of this study was to quantify the effect of hedgerows on the water cycle by evaluating spatial and temporal variations of water balance components of a hillslope crossed by a hedgerow. Water flow simulation was performed using Hydrus‐2D to emphasize the importance of transpiration in the water balance and to evaluate water extraction from groundwater. Model validation was performed by comparing simulated and observed soil matrix potentials and groundwater levels. Hedgerow transpiration was calculated from sap flow measurements of four trees. Water balance components calculated with a one‐dimensional water balance equation were compared with simulations. Simulation runs with and without tree root uptake underlined the effect of hedgerow transpiration, increasing capillary rise and decreasing drainage. Results demonstrated that the spatial and temporal variability of water balance components was related to the hedgerow presence as well as to the meteorological context. The relations between transpiration, groundwater proximity and soil‐water availability determined the way in which water balance components were affected. Increased capillary rise and decreased drainage near hedges were related to the high transpiration of trees identified in this study. Transpiration reached twice the potential evapotranspiration when groundwater level and precipitation amounts were high. Water balance analysis showed that transpiration was a substantial component, representing 40% of total water output. These results may offer support for improving hydrological models by including the effect of land use and land cover on hydrological processes. Copyright © 2012 John Wiley & Sons, Ltd.     

Impact of precipitation characteristics on soil hydrology in tile‐drained landscapes

Understanding the variables regulating tile‐flow response to precipitation in the US Midwest is critical for water quality management. This study (1) investigates the relationship between precipitation characteristics, antecedent water table depth and tile‐flow response at a high temporal resolution during storms; and (2) determines the relative importance of macropore flow versus matrix flow in tile flow in a tile‐drained soya bean field in Indiana. In spring, although variations in antecedent water table depth imparted some variation in tile‐flow response to precipitation, bulk precipitation was the best predictor of mean tile flow, maximum tile flow, time to peak, and run‐off ratio. The contribution of macropore flow to total flow significantly increased with precipitation amount, and macropore flow represented between 11 and 50% of total drain flow, with peak contributions between 15 and 74% of flow. For large storms (>6 cm bulk precipitation), cations data indicated a dilution of groundwater with new water as discharge peaked. Although no clear dilution or concentration patterns for Mg²⁺ or K⁺ were observed for smaller tile flow generating events (<3 cm bulk precipitation), macropore flow still contributed between 11 and 17% of the total flow for these moderate size storms. Inter‐drain comparison stressed the need to use triplicate or duplicate tile drain experiments when investigating tile drainage impact on water and N losses at the plot scale. These results significantly increase our understanding of the hydrological functioning of tile‐drained fields in spring, when most N losses to streams occur in the US Midwest. Copyright © 2010 John Wiley & Sons, Ltd.     

Appropriate Spatial Sampling of Rainfall or Flow Simulation/Echantillonnage Spatial de la Pluie Approprié pour la Simulation D'écoulements

Abstract

The objective of this study is to find the appropriate number and location of raingauges for a river basin for flow simulation by using statistical analyses and hydrological modelling. First, a statistical method is used to identify the appropriate number of raingauges. Herein the effect of the number of raingauges on the cross-correlation coefficient between areally averaged rainfall and discharge is investigated. Second, a lumped HBV model is used to investigate the effect of the number of raingauges on hydrological modelling performance. The Qingjiang River basin with 26 raingauges in China is used for a case study. The results show that both cross-correlation coefficient and modelling performance increase hyperbolically, and level off after five raingauges (therefore identified to be the appropriate number of rain-gauges) for this basin. The geographical locations of raingauges which give the best and worst hydrological modelling performance are identified, which shows that there is a strong dependence on the local geographical and climatic patterns.