不同开口比人工鱼礁体水动力特性及礁体稳定性研究

为研究方型人工鱼礁体开口比的变化对其水动力特性的影响,利用Fluent软件模拟了边长为3m、开口比为0～0.6之间7种不同方型鱼礁体周围水流场,通过分析水流场变化规律得到了礁体流场效应、阻力系数随开口比的变化情况;基于Morison方程计算了礁体在波流作用下的受力及其抗滑移、抗倾覆安全系数。研究结果表明:当礁体开口比小于0.2时,背涡区范围较大,流场效应明显;随着开口比的增大,礁体产生的上升流范围及竖直向最大速度分量逐渐减小;对于方形开口礁体,阻力系数与开口比的关系式为Cd=0.875φ+1.088(R2=0.963,P<0.01);随着开口比的增大,礁体所受最大波流作用力、抗滑移及抗倾覆安全系数逐渐减小,但礁体不会发生滑移和倾覆,可为实际礁体结构的设计提供参考。     

Decomposition analysis on direct material input and dematerialization of mining cities in Northeast China

Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calculate the direct material input (DMI) of 14 typical mining cities in Northeast China in 1995-2004 and to analyze the demateri-alization and its driving factors in the different types of mining cities oriented by coal, petroleum, metallurgy and multi-resources. The results are as follows: 1) from 1995 to 2006, the increase rates of the DMI and the material input intensity of mining cities declined following the order of multi-resources, metallurgy, coal, and petroleum cities, and the material utilizing efficiency did following the order of petroleum, coal, metallurgy, and multi-resources cities; 2) during the research period, all the kinds of mining cities were in the situation of weak sustainable development in most years; 3) the pressure on resources and environment in the multi-resources cities was the most serious; 4) the petro-leum cities showed the strong trend of sustainable development; and 5) in recent years, the driving function of eco-nomic development for material consuming has continuously strengthened and the controlling function of material utilizing efficiency for it has weakened. The key approaches to promote the development of circular economy of min-ing cities in Northeast China are put forward in the following aspects: 1) to strengthen the research and development of the technique of resources' cycling utilization, 2) to improve the utilizing efficiency of resources, and 3) to carry out the auditing system of resources utilization.     

Numerical study on scale effect of form factor

The scale effect of form factor is investigated via a numerical approach in this paper, where the turbulent ship flow is computed by solving the steady and incompressible Reynolds-averaged Navier-Stokes and continuity equations. A wall function approach is employed to bridge the near-wall and outer turbulent flow region. The numerical scheme based on a finite-volume formulation is applied to discretize the coupled governing equation. For the sake of numerical stability, accuracy and economy, an identical grid is employed to compute ship flow at different Reynolds number, where the grid is optimized for the medium Reynolds number of the investigated range. Four surface ships and two sub-bodies with notably different geometrical characteristics are chosen as the investigated cases, where double-model flow without appendages is computed. The calculated total resistance coefficient shows a decreasing tendency against Reynolds number among all studied hulls. Similar to the calculated total resistance coefficient, the calculated friction resistance coefficient decreases with the Reynolds number and varies relatively little for a given Reynolds number among different hulls. The viscous pressure resistance coefficient is less insensitive to the Reynolds number but apparently depends on hull form. Compared with the form factor calculation based on empirical friction lines, the flat-plate friction prediction based on CFD approach clearly gives smaller Re-dependent form factor, which should more realistically reflect the scale effect of form factor. The form factor exhibits a near linear and increasing dependence on Reynolds number. The numerical results show that the dependence of r_P on Reynolds number mainly governs the scale effect of form factor.     

Three-dimensional liquid sloshing in a tank with baffles

A numerical model has been developed to study three-dimensional (3D) liquid sloshing in a tank with baffles. The numerical model solves the spatially averaged Navier-Stokes equations, which are constructed on a non-inertial reference frame having six degree-of-freedom (DOF) of motions. The large-eddy-simulation (LES) approach is employed to model turbulence by using the Smagorinsky sub-grid scale (SGS) closure model. The two-step projection method is employed in the numerical solutions, aided by the Bi-CGSTAB technique to solve the pressure Poisson equation for the filtered pressure field. The second-order accurate volume-of-fluid (VOF) method is used to track the distorted and broken free surface. The baffles in the tank are modeled by the concept of virtual boundary force (VBF) method. The numerical model is first validated against the available analytical solution and experimental data for two-dimensional (2D) liquid sloshing in a tank without baffles. The 2D liquid sloshing in tanks with baffles is then investigated. The numerical results are compared with other results from available literatures. Good agreement is obtained. Finally, the model is used to study 3D liquid sloshing in a tank with vertical baffles. The effect of the baffle is investigated and discussed.     

Regional hydrologic mapping of flows in stream networks

River low flow (LF) is an important hydrological characteristic used in management of the quantity and quality of water resources. A common way to transpose at-station low flow quantiles to ungaged locations involves development of regional multivariate regression models. In site selection studies of water control facilities, need arises to automate the mapping of LF characteristics onto the stream network in a continuous manner. This would allow estimation of LF at any desired ungaged location. A mapping algorithm is introduced that determines the value of regression model's independent variables (input components) over the drainage area of each stream pixel and calculates the flow (output). The mapping algorithm relies mainly on the digital elevation model (DEM) and its derivatives, such as flow direction and flow accumulation. Furthermore, the contribution of each independent variable of the regional model to the total flow may be plotted to represent the flow profiles along the streams. A case study involving LF mapping in rivers of Gilan province, Iran, where LF quantiles are required for issuing water withdrawal permits as well as maintaining water quality standards, is also described in the paper. Overall, the maps and profiles of flow statistics in the region of interest provide convenient visualization and assessment tools for water resource and environmental engineers. The transposition algorithm may also be applied in regional mapping of other flow characteristics such as flood or average flows.     

嫦娥一号IIM数据应用处理流程分析

对嫦娥一号干涉成像光谱仪（IIM）数据的特点进行了分析,并就存在的一些问题提出了解决方案,制定了IIM数据应用处理流程,为该数据的正确使用提供方法参考。研究结果表明,在空间域传感器左侧响应偏低,右侧响应偏高;在波谱域长波段响应存在较大偏差。经过绝对定标和辐射畸变校正后的反射率与地基望远镜光谱匹配良好,可以用于应用研究。利用校正后的数据对Aristarchus地区岩石类型开展初步研究的结果表明,该地区在纵向和横向上都存在岩性的多样性。校正后的图像不仅提高了分类精度,还被识别出撞击坑可能存在的滑坡。嫦娥一号IIM能够在全球、区域和局部尺度上以较高的空间分辨率和光谱分辨率获取月表元素和矿物成分信息,有助于深化对月球形成和演化的认识。     

Late glacial fans in the eastern Skagerrak; depositional environment interpreted from swath bathymetry and seismostratigraphy

The origin of acoustically transparent fan deposits overlying glacial till and ice-proximal sediments on the southern margin of the Norwegian Channel has been studied using high-resolution seismic-reflection profiles and multibeam bathymetry. The first deposits overlying glacigenic sediments are a series of stacked, acoustically transparent submarine fans. The lack of glaciomarine sediments below and between individual fans indicates that deposition was rapid and immediately followed the break up of the Late Weichselian ice cover. The fans are overlain by stratified glaciomarine sediments and Holocene mud. Because of the uniformity of this drape, the upper surface of the fan deposits is mimicked at the present seafloor, and the bathymetric images clearly show the spatial relationship of the fans to bedrock ridges and the presence of braided channel-levee systems on the surface of the youngest fans. The acoustically transparent character of the fan deposits indicates that they comprise silt and clay, and their lobate form and lack of internal stratification indicates that they were deposited by debris flows. The channel-levee morphology indicates deposition from more watery hyperconcentrated fluid flows. The fan sediments were either derived from 1) erosion of Mid Weichselian lake deposits in southern Skagerrak or 2) from Late glacial ice-margin lake deposits, ponded against the Norwegian Channel ice stream, which collapsed catastrophically when the lateral support was removed as the ice disintegrated. Fans composed almost exclusively of fine-grained sediment need not, therefore, rule out an origin in a deglacial setting relatively close to the former margins of glaciers and ice sheets.     

Numerical flow and performance analysis of a water-jet axial flow pump

The purpose of the present study is to investigate the performance and three-dimensional flow fields in a water-jet pump. TASCflow is employed to simulate the rotator-stator coupling flow field. A standard k-ε turbulence model combined with standard wall functions is used. In order to investigate the effect of a rear stator on flow fields, the flows in two water-jet pumps with and without a rear stator are studied. Computational fluid dynamics (CFD)-predicted overall performances are in good agreement with the experimental results. Then the flow fields, such as the pressure distribution on the blade surfaces, and the axial and tangential velocity distribution, especially the radial loading distribution, are investigated at different flow rates. In addition, the effects of a rear stator and different spacings between the rotor and the stator on the overall performance and the flow fields of the water-jet pump are also investigated.     

Numerical modelling of deep sea air-lift

Deep sea air-lifting of solid particles from depth of 1600 m is simulated with a mathematical model of the three-phase flow in an upward pipe. The computations are carried out for an axisymmetric domain in a transient way. Phase distributions, pressure and velocity profiles together with flow rates for all phases are presented and analysed. The influence of the pipe diameter on the air-lift efficiency was studied for air-lift pipes of different lengths and found to be significant. The lifting efficiency increases with the increase of the pipe diameter due to the reduction of the wall friction influence on the flow. In addition, the efficiency also increases with the increase of the solid particles volume fraction at the inlet. The presented numerical model can be utilized during various stages of the design of the air-lift pumps to help answer fundamental questions on the process, and during their operation to select optimal process parameters and to address possible problems.     

Changes in the abundance and composition of picophytoplankton in relation to the occurrence of a Kyucho and a bottom intrusion in the Bungo Channel,Japan

The Bungo Channel in southwestern Japan receives both warm, called Kyucho, and cold deep-water intrusions (bottom intrusion) from the Pacific Ocean. Abundances of Prochlorococcus, Synechococcus, and eukaryotic picophytoplankton were monitored from 18 July to 17 August 2001 to clarify whether advected picophytoplankton from the Pacific Ocean can grow in the channel or not. Synechococcus cells were further discriminated into low- and high-PUB types according to their fluorescence property in flow cytometry. From 18 to 25 July, the water temperature decreased by 3 °C at a 5-m depth at all stations, indicating the occurrence of a bottom intrusion. From 25 July to 4 August, a Kyucho occurred and the water temperature rapidly increased. From 4 to 17 August, a bottom intrusion and a Kyucho both occurred twice, although the intensities were smaller than those occurring until 4 August. From 18 to 30 July, the abundance of both Prochlorococcus and a high-PUB type of Synechococcus drastically decreased because of a bottom intrusion; however, the abundances rapidly increased due to the advection by a Kyucho. These advected cells increased from 4 to 17 August in the channel and Kitanada Bay. Changes in the abundance of low-PUB type of Synechococcus and eukaryotic picophytoplankton were less noticeable than those in the abundance of Prochlorococcus and high-PUB type. The present study demonstrated that oceanic picophytoplankton advected by the Kyucho could grow in the channel. However, abundances of low-PUB type and eukaryotic picophytoplankton increased higher than those of Prochlorococcus and high-PUB type did. Thus, these oceanic phytoplankters will be excluded when Kyucho does not occur for a long time. The co-occurrence of various types of picophytoplankton found in the channel is probably achieved by both Kyucho event and their growth capability in the channel.