西霞口龙眼港-4.5m码头加固扩建施工新方法

以山东西霞口集团龙眼港—4.5m码头的改扩建工程为例,阐述了采用三管法旋喷桩托底置换、加劲旋喷桩配合锚拉支护方法在码头改造施工中的可行性及其施工工艺和施工方法,为同类工程施工积累了经验。     

钱塘江江心排污的数值模拟

从立面二维非恒定流体动力学方程出发,应用κ-ε湍流模式计算流场,再用准三维的浓度对流-扩散方程,即考虑了侧向扩散的立面二维浓度控制方程,模拟了钱塘江江心6个竖管排污在潮流作用下近区浓度场,其结果和实际观测值基本吻合。     

A climatic dataset of ocean vertical turbulent mixing coefficient based on real energy sources

Using data on wind stress, significant height of combined wind waves and swell, potential temperature, salinity and seawater velocity, as well as objectively-analyzed in situ temperature and salinity, we established a global ocean dataset of calculated wind- and tide-induced vertical turbulent mixing coefficients. We then examined energy conservation of ocean vertical mixing from the point of view of ocean wind energy inputs, gravitational potential energy change due to mixing (with and without artificially limiting themixing coefficient), and K-theory vertical turbulent parameterization schemes regardless of energy inputs. Our research showed that calculating the mixing coefficient with average data and artificial limiting the mixing coefficient can cause a remarkable lack of energy conservation, with energy losses of up to 90% and changes in the energy oscillation period. The data also show that wind can introduce a huge amount of energy into the upper layers of the Southern Ocean, and that tidesdo so in regions around underwater mountains. We argue that it is necessary to take wind and tidal energy inputs into account forlong-term ocean climate numerical simulations. We believe that using this ocean vertical turbulent mixing coefficient climatic dataset is a fast and efficient method to maintain the ocean energy balance in ocean modeling research.     

Characterisation of the 1997 Vulcanian explosions of Soufrière Hills Volcano,Montserrat, by video analysis

The activity of Convention at Montserrat Soufrière Hills Volcano, Montserrat, during the period 1995–1999 included numerous violent explosions. Two major cycles of Vulcanian explosions occurred in 1997: a first of 13 explosions between 4 and 12 August and a second of 75 between 22 September and 21 October. The explosions were short-lived events lasting a few tens of seconds during which partial fountain collapse generated pyroclastic surges and pyroclastic flows, and buoyant plumes ascended 3–15 km into the atmosphere. Each explosion discharged on average 3×10⁵ m³ (dense-rock equivalent, DRE) of magma, draining the conduit to depths of 1–2 km. The paper focuses on the first few seconds of three explosions of the 75 that occurred in September/October 1997: 6 October 1997 at 17:50, 7 October 1997 at 16:02 and 9 October 1997 at 12:32. Physical parameters such as exit velocities, magmatic water contents and magma pressures at fragmentation are estimated by following and modelling the ascent of individual momentum-dominated finger jets visible on videos during the initial stages of each explosion. The model treats each finger jet as an incompressible flow sustained by a steady flux of gas and particles during the few seconds of ascent, and produces results that compare favourably with those using a multiphase compressible code run using similar eruptive parameters. Each explosion reveals a progressive increase in eruptive intensity with time, jet exit velocities increasing from 40 m s^–1 at the beginning of the explosion up to 140 m s^–1 after a few seconds. Modelling suggests that the first magma to exit was largely degassed, whereas that discharged after a few seconds contained up to 2 wt% water. Magma overpressures up to ~10 MPa are estimated to have existed in the conduit immediately prior to each explosion. Progressive increases in jet exit velocity with time over the first few seconds of each explosion provide direct evidence for strong pre-eruptive gradients in water content and magma pressure in the upper reaches (probably 100–500 m) of the conduit. Fountain collapse occurred during the first 10–20 s of each explosion because the discharging jets had bulk densities up to 100 times that of the atmosphere and were unable to entrain enough air to become buoyant. Such high eruptive densities were due to the presence of partially degassed magma in the conduit.Editorial responsibility: A. Woods     

THREE-DIMENSIONAL CALCULATION OF PARTICLE-LIQUID TWO-PHASE TURBULENT FLOW IN A HYDRAULIC TURBINE RUNNER

Ｉｎｔｈｅｐｒｅｓｅｎｔｐａｐｅｒ,ｔｈｅｍｕｌｔｉｆｌｕｉｄｓｍｏｄｅｌｆｏｒｔｗｏｐｈａｓｅｆｌｏｗｓａｎｄｔｈｅｋ-ε-Ａｐｔｕｒｂｕｌｅｎｃｅｍｏｄｅｌａｒｅｕｓｅｄｔｏｃａｌｃｕｌａｔｅｔｈｅｔｈｒｅｅｄｉｍｅｎｓｉｏｎａｌｔｕｒｂｕｌｅｎｔ?..     

The coupling instability of Rossby and topographic Rossby waves in the equatorial area

Before the 1980s, El Ni?o was believed as the sea surface warming along the coast of Peru in South America. As the positive anomaly strengths, the warm water expands westward along the equator to form large area of anomalous high sea surface temperature. Rasmusson and Carpenter (1982) summarized the de-velopment process of the sea surface warm water and the corresponding wind field[1] during ENSO cylce. However, this canonical El Ni?o was questioned by 1982-1983 warm episode and later dat…     

湍流通量参数化方案的非迭代方法研究

基于Högström (1996) 和Beljaars et al.(1991) 的研究工作, 沿用Louis et al.(1982) 和Launiainen (1995) 的思路, 本文采用多元回归分析方法, 研发了一种采用非迭代方法的湍流通量参数化方案。该方案直接用整体理查森数、 空气动力学粗糙度长度和热力学粗糙度长度对稳定度参数进行参数化, 从而避免了通过循环迭代计算Monin－Obukhov长度。该方案不仅有效地节省了CPU计算时间, 而且其计算结果与迭代方案 (BHH方案) 的计算结果非常接近。     

Facies and depositional architecture according to a jet efflux model of a late Paleozoic tidewater grounding-line system from the Itararé Group (Paraná Basin), southern Brazil

During the Late Paleozoic, the Gondwana supercontinent was affected by multiple glacial and deglacial episodes known as “The Late Paleozoic Ice Age” (LPIA). In Brazil, the evidence of this episode is recorded mainly by widespread glacial deposits preserved in the Paraná Basin that contain the most extensive record of glaciation (Itararé Group) in Gondwana. The Pennsylvanian to early Permian glaciogenic deposits of the Itararé Group (Paraná Basin) are widely known and cover an extensive area in southern Brazil. In the Doutor Pedrinho area (Santa Catarina state, southern Brazil), three glacial cycles of glacier advance and retreat were described. The focus of this article is to detail the base of the second glacial episodes or Sequence II. The entire sequence records a deglacial system tract that is represented by a proximal glacial grounding-line system covered by marine mudstones and shales associated with a rapid flooding of the proglacial area. This study deals with the ice proximal grounding-line systems herein interpreted according to lab model named plane-wall jet with jump. Detailed facies analysis allowed the identification of several facies ranging from boulder-rich conglomerates to fine-grained sandstones. No fine-grained deposits such as siltstone or shale were recorded. According to this model, the deposits are a product of a supercritical plane-wall outflow jet that changes to a subcritical jet downflow from a hydraulic jump. The hydraulic jump forms an important energy boundary that is indicated by an abrupt change in grain size and cut-and-fill structures that occur at the middle-fan. The sedimentary facies and facies associations show a downflow trend that can be subdivided into three distinct stages of flow development: (1) a zone of flow establishment (ZFE), (2) a zone of transition (ZFT), and (3) an established zone (ZEF). The proximal discharge is characterized by hyperconcentrated-to-concentrated flow due to the high energy and sediment-laden nature of the flows. At the transitional zone, a hydraulic jump produces a rapid shift of conglomeratic to sandy facies with associated scour features. Towards the distal zones, the jet detaches to originate a vertical turbulent jet characterized by more diluted flows. Discussion of fan facies and architecture within a framework of jet-efflux dynamics provides an improved understanding of grounding-line fans systems that produce coarse-grained strata commonly enclosed by fine-grained rocks. The results have clear implication in terms of prediction of facies tract and geometry of oil and gas reservoirs deposited under similar conditions. And also can be useful to identifying the position of a glacial terminus through time.     

高压旋喷桩单桩承载力分析

高压喷射注浆于1968年首创于日本。我国于20世纪70年代初相继引进并开始研究高压喷射注浆技术。目前,高压旋喷工艺应用最为广泛,工艺技术最为成熟。对旋喷桩成桩质量及单桩承载力进行研究分析,为旋喷桩在地基与基础工程、水利水电工程、止水、加固工程中的应用提供设计参考依据。该试验在陕西省延安市某建成小区内选三个试验点,按不同旋喷桩施工工艺成桩,通过对桩身完整性检测、单桩承载力试验,分析旋喷桩成桩质量及单桩承载力。     

提高复杂地层取心质量的一种发夹式岩心提断器及其应用

为了解决普通取心钻具在软弱、松散性复杂地层钻进中的取心问题,降低堵心、磨心概率,提高钻进回次进尺长度和岩心采取率,研制了安装在普通S95绳索取心钻具上的一种新式岩心提断器。该岩心提断器是利用女性头饰发夹卡取软弱、松散岩心,其构件由发夹、发夹座、发夹室组成,无须通过铆焊工艺固定,可在施工现场由手工借助一种发夹装配器进行组装。在某勘查区3个钻孔中进行了试验,试验孔段总进尺45.11 m,平均回次进尺1.16 m,平均岩心采取率91.42%。试验结果表明：该岩心提断器与底喷式钻头及“引心管”配合使用,能够在软弱、松散性破碎地层大幅度提高回次进尺量、岩心采取率及取心质量,解决了试验前应用普通绳索取心钻具,在钻遇松软夹石、水敏性强的复杂地层中岩心采取率不足30%的难题。用发夹卡取软弱、松散岩心的方法与类同现有技术中簧片的卡心方法比较,更具经济性、灵活性和普适性。其应用领域不限于矿山地质,还可拓展到水文地质、工程地质及环境地质的岩心钻探,具有广泛的应用前景。