A laboratory test of the soil chemical submodels of two models of catchment acidification

Parameters for ion exchange selectivity and aluminium hydroxide dissolution in the soil chemical submodels used in applications of the Birkenes model and of MAGIC are compared and several discrepancies identified for organic soils. A laboratory column simulation of the soil chemical submodels is proposed and applied to soils from the Loch Dee area in Galloway. Experimental results were well predicted by a simplified version of MAGIC, with ion exchange selectivity parameters similar to those used in a previous simulation of one subcatchment of Loch Dee. The aluminium hydroxide dissolution parameter used previously was found to be too low for the organic soil materials, where a value of 106 predicted the experimental results more closely. The model developed also included a simple silicate weathering reaction to release base cations into the system. It is concluded that such simple laboratory simulations are useful for independent calibration of the soil chemical submodel of catchment models.     

Palaeotemperature reconstructions of the European permafrost zone during marine oxygen isotope Stage 3 compared with climate model results

A palaeotemperature reconstruction based on periglacial phenomena in Europe north of approximately 51 °N, is compared with high‐resolution regional climate model simulations of the marine oxygen isotope Stage 3 (Stage 3) palaeoclimate. The experiments represent Stage 3 warm (interstadial), Stage 3 cold (stadial) and Last Glacial Maximum climatic conditions. The palaeotemperature reconstruction deviates considerably for the Stage 3 cold climate experiments, with mismatches up to 11 °C for the mean annual air temperature and up to 15 °C for the winter temperature. However, in this reconstruction various factors linking climate and permafrost have not been taken into account. In particular a relatively thin snow cover and high climatic variability of the glacial climate could have influenced temperature limits for ice‐wedge growth. Based on modelling the 0 °C mean annual ground temperature proves to be an appropriate upper temperature limit. Using this limit, mismatches with the Stage 3 cold climate experiments have been reduced but still remain. We therefore assume that the Stage 3 ice wedges were generated during short (decadal time‐scale) intervals of extreme cold climate, below the mean temperatures indicated by the Stage 3 cold climate model simulations. Copyright © 2003 John Wiley & Sons, Ltd.     

A THREE-DIMENSIONAL ELASTIC NESTED-GRID MESO-(β-γ)SCALE ATMOSPHERIC MODEL——PARTI:MODEL DESCRIPTION

A three-dimensional elastic nonhydrostatic mesoscale(β-γ)model with nested-grid is presented.It uses a set of fullequations in terrain-following coordinates as its basic dynamic frame,which is solved with a time-splitting algorithmfor acoustic and gravity waves.The model physical parameterization includes a K-theory subgrid eddy mixing for cloudand free atmosphere,a bulk planetary boundary layer parameterization,and three types of sofisticated cloudmicrophysics schemes with double-parameters for hail-bearing clouds,warm clouds and snowing clouds respectively.The model is designed to be used flexibly for simulations of a variety of meso-and small-scale atmospheric processes,and can be improved as a regional and local operational NWP system in future.     

Sensitivity analysis of a deterministic water temperature model to forest canopy and soil temperature in Catamaran Brook (New Brunswick,Canada)

A coupled deterministic hydrological and water temperature model, CEQUEAU, was modified to include soil temperature and crown closure in its calculation of local advective terms in the heat budget. The modified model was than tested to verify its sensitivity to these modifications. An analysis of the heat budget of a small forested catchment in eastern Canada revealed that the advective term related to interflow plays a significant role in the daily water heat budget, providing on average 28% of the local advective budget (which also includes advective heat terms from surface runoff and groundwater) and nearly 14% of the total heat budget (which includes all radiative terms at the water surface, convection and evaporation, as well as the local advective terms). Relative sensitivity indices (RSIs) were used to verify the impact of the newly introduced parameters and variables. Among them, parameters related to the forest cover (crown closure and leaf area index) have a maximum RSI of ?0·6; i.e. a 100% increase in value produces a 60% decrease in the local advective term. Parameters with the greatest influence are the volume of water contributing to interflow and the amplitude of the net radiative flux at the soil surface, which, if doubled, would double the contribution of the local interflow advective term to the heat budget. Copyright © 2003 John Wiley & Sons, Ltd.     

Modelling the effect of low soil temperatures on transpiration by Scots pine

For ecosystem modelling of the Boreal forest it is important to include processes associated with low soil temperature during spring‐early summer, as these affect the tree water uptake. The COUP model, a physically based SVAT model, was tested with 2 years of soil and snow physical measurements and sap flow measurements in a 70‐year‐old Scots pine stand in the boreal zone of northern Sweden. During the first year the extent and duration of soil frost was manipulated in the field. The model was successful in reproducing the timing of the soil warming after the snowmelt and frost thaw. A delayed soil warming, into the growing season, severely reduced the transpiration. We demonstrated the potential for considerable overestimation of transpiration by the model if the reduction of the trees' capacity to transpire due to low soil temperatures is not taken into account. We also demonstrated that the accumulated effect of aboveground conditions could be included when simulating the relationship between soil temperature and tree water uptake. This improved the estimated transpiration for the control plot and when soil warming was delayed into the growing season. The study illustrates the need of including antecedent conditions on root growth in the model in order to catch these effects on transpiration. The COUP model is a promising tool for predicting transpiration in high‐latitude stands. Copyright © 2006 John Wiley & Sons, Ltd.     

WEKU – a GIS-Supported stochastic model of groundwater residence times in upper aquifers for the supraregional groundwater management

 The supraregional GIS-supported stochastical model, WEKU, for the determination of groundwater residence times in the upper aquifers of large groundwater provinces is presented. Using a two-dimensional analytical model of groundwater flow, groundwater residence times are determined within two extreme cases. In the first case, maximal groundwater residence times are calculated, representing the part of groundwater, that is drained by the main surface water of a groundwater catchment area. In the second case, minimal groundwater residence times for drainage into the nearest surface water are determined. Using explicit distribution functions of the input parameters, mean values as well as potential ranges of variations of the groundwater residence times are derived. The WEKU model has been used for the determination of groundwater residence times throughout Germany. The model results – mean values and deviations of the groundwater velocity and the maximal and minimal groundwater residence times in the upper aquifers – are presented by general maps and discussed in detail. It is shown that the groundwater residence times in the upper aquifer vary regionally, differentiated between less than 1 year and more than 2000 years. Using this information, the time scales can be specified, until measures to remediate polluted groundwater resources may lead to a substantial groundwater quality improvement in the different groundwater provinces of Germany. With respect to its supraregional scale of application, the WEKU model may serve as a useful tool for the supraregional groundwater management on a state, federal or international level. Received: 15 August 1995 · Accepted: 15 October 1995     

The influence of macrophyte growth,typical of eutrophic conditions,on river flow velocities and turbulence production

The influence of emergent and submerged macrophytes on flow velocity and turbulence production is demonstrated in a 140 m reach of the River Blackwater in Farnborough, Hampshire, UK. Macrophyte growth occurs in patches and is dominated by Sparganium erectum and Sparganium emersum. In May 2001, patches of S. erectum were already established and occupied 18% of the channel area. The flow adjusted to these (predominantly lateral) patches by being channelled through a narrower cross‐section. The measured velocity profiles showed a logarithmic form, with deviations attributable to topographic control. The channel bed was the main source of turbulence. In September 2001, in‐stream macrophytes occupied 27% of the channel, and overhanging bank vegetation affected 32% of the area. Overall flow resistance, described by Manning's n, showed a threefold increase that could be attributed to the growth of S. emersum in the middle of the channel. Velocity profiles showed different characteristic forms depending on their position relative to plant stems and leaves. The overall velocity field had a three‐dimensional structure. Turbulence intensities were generally higher and turbulence profiles tended to mirror the velocity profiles. Evidence for the generation of coherent eddies was provided by ratios of the root mean square velocities. Spectral analysis identified deviations from the Kolmogorov ?5/3 power law and provided statistical evidence for a spectral short‐cut, indicative of additional turbulence production. This was most marked for the submerged vegetation and, in some instances, the overhanging bank vegetation. The long strap‐like leaves of S. emersum being aligned approximately parallel to the flow and the highly variable velocity field created by the patch arrangement of macrophytes suggest that the dominant mechanism for turbulence production is vortex shedding along shear zones. Wake production around individual stems of S. emersum close to the bed may also be important locally. Copyright © 2006 John Wiley & Sons, Ltd.     

Implications of low-pass filtering on power spectra and autocorrelation functions of turbulent velocity signals

Filtering either through the electronics of an instrument or through digital procedure is performed routinely on geophysical data. When velocity fluctuations are measured in turbulent flows using electromagnetic current meters (ECMs), a builtin lowpass Butterworth filter of order n usually attenuates fluctuations at high frequencies. However, the effects of this filter may not be acknowledged in turbulence studies, thus impeding comparisons between data collected with different ECMs. This paper explores the implications of the filters on the characteristics of velocity signals, mainly on variance, power spectra, and correlation analyses. Variance losses resulting from filtering can be important but will vary with the order n of the Butterworth filter, decreasing as n increases. Knowing the filter response, it is possible to reconstruct the original signal spectrum to evaluate the effect of filtering on variance and to allow comparisons between data collected with different instruments. The autocorrelation function also is affected by filtering which increases the value of the coefficients in the first lags, resulting in an overestimation of the integral length scale of coherent structures. These important effects add to those related to size and shape differences in ECM sensors and must be taken into account in comparative studies.     

Structural modeling and testing of a concrete canoe

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.