Turbulent Intensities and Velocity Spectra for Bare and Forested Gentle Hills: Flume Experiments

To investigate how velocity variances and spectra are modified by the simultaneous action of topography and canopy, two flume experiments were carried out on a train of gentle cosine hills differing in surface cover. The first experiment was conducted above a bare surface while the second experiment was conducted within and above a densely arrayed rod canopy. The velocity variances and spectra from these two experiments were compared in the middle, inner, and near-surface layers. In the middle layer, and for the canopy surface, longitudinal and vertical velocity variances () were in phase with the hill-induced spatial mean velocity perturbation (Δu) around the so-called background state (taken here as the longitudinal mean at a given height) as predicted by rapid distortion theory (RDT). However, for the bare surface case, and remained out of phase with Δu by about L/2, where L is the hill half-length. In the canopy layer, wake production was a significant source of turbulent energy for , and its action was to re-align velocity variances with Δu in those layers, a mechanism completely absent for the bare surface case. Such a lower ‘boundary condition’ resulted in longitudinal variations of to be nearly in phase with Δu above the canopy surface. In the inner and middle layers, the spectral distortions by the hill remained significant for the background state of the bare surface case but not for the canopy surface case. In particular, in the inner and middle layers of the bare surface case, the effective exponents derived from the locally measured power spectra diverged from their expected  − 5/3 value for inertial subrange scales. These departures spatially correlated with the hill surface. However, for the canopy surface case, the spectral exponents were near  − 5/3 above the canopy though the minor differences from  − 5/3 were also correlated with the hill surface. Inside the canopy, wake production and energy short-circuiting resulted in significant departures from  − 5/3. These departures from  − 5/3 also appeared correlated with the hill surface through the wake production contribution and its alignment with Δu. Moreover, scales commensurate with Von Karman street vorticies well described wake production scales inside the canopy, confirming the important role of the mean flow in producing wakes. The spectra inside the canopy on the lee side of the hill, where a negative mean flow delineated a recirculation zone, suggested that the wake production scales there were ‘broader’ when compared to their counterpart outside the recirculation zone. Inside the recirculation zone, there was significantly more energy at higher frequencies when compared to regions outside the recirculation zone.     

Large-Eddy Simulation of Flows over Random Urban-like Obstacles

Further to our previous large-eddy simulation (LES) of flow over a staggered array of uniform cubes, a simulation of flow over random urban-like obstacles is presented. To gain a deeper insight into the effects of randomness in the obstacle topology, the current results, e.g. spatially-averaged mean velocity, Reynolds stresses, turbulence kinetic energy and dispersive stresses, are compared with our previous LES data and direct numerical simulation data of flow over uniform cubes. Significantly different features in the turbulence statistics are observed within and immediately above the canopy, although there are some similarities in the spatially-averaged statistics. It is also found that the relatively high pressures on the tallest buildings generate contributions to the total surface drag that are far in excess of their proportionate frontal area within the array. Details of the turbulence characteristics (like the stress anisotropy) are compared with those in regular roughness arrays and attempts to find some generality in the turbulence statistics within the canopy region are discussed.     

Joint PDF Modelling of Turbulent Flow and Dispersion in an Urban Street Canyon

The joint probability density function (PDF) of turbulent velocity and concentration of a passive scalar in an urban street canyon is computed using a newly developed particle-in-cell Monte Carlo method. Compared to moment closures, the PDF methodology provides the full one-point one-time PDF of the underlying fields containing all higher moments and correlations. The small-scale mixing of the scalar released from a concentrated source at the street level is modelled by the interaction by exchange with the conditional mean (IECM) model, with a micro-mixing time scale designed for geometrically complex settings. The boundary layer along no-slip walls (building sides and tops) is fully resolved using an elliptic relaxation technique, which captures the high anisotropy and inhomogeneity of the Reynolds stress tensor in these regions. A less computationally intensive technique based on wall functions to represent the boundary layers and its effect on the solution are also explored. The calculated statistics are compared to experimental data and large-eddy simulation. The present work can be considered as the first example of computation of the full joint PDF of velocity and a transported passive scalar in an urban setting. The methodology proves successful in providing high level statistical information on the turbulence and pollutant concentration fields in complex urban scenarios.     

A comparison of local simulations and reduced models of MRI-induced turbulence

We run mean-field shearing-box numerical simulations with a temperature-dependent resistivity and compare them to a reduced dynamical model. Our simulations reveal the co-existence of two quasi-steady states, a 'quiet' state and an 'active' turbulent state, confirming the predictions of the reduced model. The initial conditions determine on which state the simulation ultimately settles. The active state is strongly influenced by the geometry of the computational box and the thermal properties of the gas. Cubic domains support permanent channel flows, bar-shaped domains exhibit eruptive behaviour, and horizontal slabs give rise to infrequent channels. Meanwhile, longer cooling time-scales lead to higher saturation amplitudes.     

Probing magnetic turbulence by synchrotron polarimetry: statistics and structure of magnetic fields from Stokes correlators

We describe a novel technique for probing the statistical properties of cosmic magnetic fields based on radio polarimetry data. Second-order magnetic field statistics like the power spectrum cannot always distinguish between magnetic fields with essentially different spatial structure. Synchrotron polarimetry naturally allows certain fourth-order magnetic field statistics to be inferred from observational data, which lifts this degeneracy and can thereby help us gain a better picture of the structure of the cosmic fields and test theoretical scenarios describing magnetic turbulence. In this work we show that a fourth-order correlator of specific physical interest, the tension force spectrum, can be recovered from the polarized synchrotron emission data. We develop an estimator for this quantity based on polarized emission observations in the Faraday rotation free frequency regime. We consider two cases: a statistically isotropic field distribution, and a statistically isotropic field superimposed on a weak mean field. In both cases the tension force power spectrum is measurable; in the latter case, the magnetic power spectrum may also be obtainable. The method is exact in the idealized case of a homogeneous relativistic electron distribution that has a power-law energy spectrum with a spectral index of   p = 3  , and assumes statistical isotropy of the turbulent field. We carry out numerical tests of our method using synthetic polarized emission data generated from numerically simulated magnetic fields. We show that the method is valid, that it is not prohibitively sensitive to the value of the electron spectral index p , and that the observed tension force spectrum allows one to distinguish between e.g. a randomly tangled magnetic field (a default assumption in many studies) and a field organized in folded flux sheets or filaments.     

Large-scale galactic turbulence: can self-gravity drive the observed H i velocity dispersions?

Observations of turbulent velocity dispersions in the H  i component of galactic discs show a characteristic floor in galaxies with low star formation rates and within individual galaxies the dispersion profiles decline with radius. We carry out several high-resolution adaptive mesh simulations of gaseous discs embedded within dark matter haloes to explore the roles of cooling, star formation, feedback, shearing motions and baryon fraction in driving turbulent motions. In all simulations the disc slowly cools until gravitational and thermal instabilities give rise to a multiphase medium in which a large population of dense self-gravitating cold clouds are embedded within a warm gaseous phase that forms through shock heating. The diffuse gas is highly turbulent and is an outcome of large-scale driving of global non-axisymmetric modes as well as cloud–cloud tidal interactions and merging. At low star formation rates these processes alone can explain the observed H  i velocity dispersion profiles and the characteristic value of  ∼10 km s⁻¹  observed within a wide range of disc galaxies. Supernovae feedback creates a significant hot gaseous phase and is an important driver of turbulence in galaxies with a star formation rate per unit area  ≳10⁻³ M_⊙ yr⁻¹ kpc⁻²  .     

The inner scale of the plasma turbulence towards PSR J1644−4559

By measuring the decaying shape of the scatter-broadened pulse from the bright distant pulsar PSR J1644−4559, we probe waves scattered at relatively high angles by very small spatial scales in the interstellar plasma, which allows us to test for a wavenumber cutoff in the plasma density spectrum. Under the hypothesis that the density spectrum is due to plasma turbulence, we can thus investigate the (inner) scale at which the turbulence is dissipated. We report observations carried out with the Parkes radio telescope at 660 MHz from which we find strong evidence for an inner scale in the range 70–100 km, assuming an isotropic Kolmogorov spectrum. By identifying the inner scale with the ion inertial scale, we can also estimate the mean electron density of the scattering region to be 5–10 cm⁻³. This is comparable with the electron density of H  ii region G339.1−0.4, which lies in front of the pulsar, and so confirms that this region dominates the scattering. We conclude that the plasma inside the region is characterized by fully developed turbulence with an outer scale in the range 1–20 pc and an inner scale of 70–100 km. The shape of the rising edge of the pulse constrains the distribution of the strongly scattering plasma to be spread over about 20 per cent of the 4.6 kpc path from the pulsar, but with similarly high electron densities in two or more thin layers, their thicknesses can only be 10–20 pc.     

Stochastic wobble of accretion discs and jets from turbulent rocket torques

Models of accretion discs and their associated outflows often incorporate assumptions of axisymmetry and symmetry across the disc plane. However, for turbulent discs these symmetries only apply to averaged quantities and do not apply locally. The local asymmetries can induce local imbalances in outflow power across the disc mid-plane, which can in turn induce local tilting torques. Here we calculate the effect of the resulting stochastic torques on disc annuli that are a consequence of standard mean field accretion disc models. The torques induce a random walk of the vector perpendicular to the plane of each averaged annulus. This random walk is characterized by a radially dependent diffusion coefficient which we calculate for small angle tilt. We use the coefficient to calculate a radially dependent time-scale for annular tilt and associated jet wobble. The wobble time depends on the square of the wander angle so the age of a given system determines the maximum wobble angle. We apply this to examples of blazars, young stellar objects and binary engines of pre-planetary nebulae and microquasars. It is noteworthy that for an averaging time   t _w∼ 3 d  , we estimate a wobble angle for jets in SS 433 of  θ∼ 0.8°  , not inconsistent with observational data. In general the non-periodic nature of the stochastic wobble could distinguish it from faster periodic jet precession.