西藏札达盆地控盆断裂有限元数值模拟

札达盆地是喜马拉雅构造带中的一个山间断陷盆地,其演化过程与盆地两侧的控盆构造密切相关。对控盆断裂的构造应力场进行模拟计算,将有助于进一步深化对本区构造控盆的认识。因此,在对盆地构造地质进行详细调查的基础上,结合本区的深部地质与地球物理资料,对札达盆地控盆断裂的构造应力场进行了模拟。计算结果表明,札达盆地的演化明显受盆地两侧边界断裂的控制,札达盆地是在整体南北向挤压应力的作用下,不同块体差异隆升作用的结果。其南侧的控盆断裂为北倾的正断层,北侧的控盆断裂为南倾的逆断层,二者共同形成了南降北升的翘板式断陷盆地运动过程,是喜马拉雅地块在陆内汇聚挤压构造环境中构造应力场调整的一种方式。     

鄂尔多斯盆地黄陵、东胜地区地温场对比

鄂尔多斯盆地黄陵、东胜铀矿区分别处于盆地南部渭北隆起的北侧边缘和盆地北部伊盟隆起的东部,赋矿层位都是中侏罗统直罗组。盆地南、北铀矿区在现今地温场及古地温场都存在明显差异,南部现今大地热值及热演化程度明显高于北部。对于下侏罗统延安组和石炭—二叠系煤层,黄陵地区镜质体反射率都高于东胜地区。通过镜质体反射率资料得出同一埋深的一套地层经历的最大古地温和对应的古地温梯度也有南部高于北部的现象。由于早白垩世后期盆地普遍整体抬升使得现今地温相对古地温降低,南部黄陵地区抬升剥蚀量大于北部东胜地区,导致古、今地温差异也大于后者。盆地南部庆阳—富县一带局部构造热运动,导致南部异常地温场的形成,使得南部热演化程度高于北部。     

西藏冈底斯带石炭纪—二叠纪岛弧造山作用：火山岩及地球化学证据

系统研究了西藏冈底斯带石炭纪—二叠纪火山岩的时空分布、岩相学、元素及Sr、Nd、Pb 同位素地球化学和构造环境、源区性质,并与喜马拉雅带二叠纪火山岩进行了对比研究。冈底斯带石炭纪—二叠纪火山岩近东西向集中分布在冈底斯构造带中北部地带,空间上从东至西火山活动的强度和规模渐次减小,时间上从早至晚火山活动的强度和规模总体由弱到强。冈底斯带石炭纪—二叠纪火山岩形成于活动大陆边缘的岛弧构造环境,从早到晚岛弧造山作用经历了初始岛弧→早期岛弧→成熟岛弧的发展演变过程,火山岩浆来源于富集型地幔部分熔融作用,原始岩浆在形成和演化的过程中有俯冲洋壳及随带的深海沉积物和再循环进人地慢的地壳物质组分的强烈混染,明显不同于受地壳物质组分强烈混染的喜马拉雅带二叠纪陆缘裂陷型火山岩。综合研究冈底斯带及其邻区近年来的最新调查与研究成果,从北向南拟建了石炭纪—二叠纪冈底斯岛弧→雅鲁藏布江弧后裂谷盆地→喜马拉雅陆缘裂陷盆地的弧盆系时空结构演化模式,探讨了冈瓦纳大陆北缘石炭纪—二叠纪活动大陆边缘的岛弧造山作用与青藏高原古特提斯演化的耦合关系及其动力学机制,讨论了冈底斯带松多乡榴辉岩的形成过程。     

幔源CO_2释出机理、脱气模式及成藏机制研究进展

针对幔源CO2如何从地幔岩浆中脱出并进入沉积地层中形成CO2气藏聚集这一关键问题,总结了国内外研究进展和前缘方向。研究表明,地幔深部的碱性玄武岩浆和碱性岩浆才是深部流体和CO2等挥发份大量赋存、渗滤和释出的场所。浅成侵入岩、次火山岩和火山通道等是CO2释放和聚集的有利位置,岩浆期后和岩浆衰弱期的热液活动阶段是CO2大量释放和聚集的有利时期。幔源CO2进入沉积盆地中具有3种脱气模式,即沿岩石圈断裂直接脱气模式、热流底辟体脱气模式和壳内岩浆房-基底断裂组合脱气模式。CO2的固有物化性质决定其运移相态多样,具有运移和聚集过程同步的特征。只有在满足大量的化学消耗及地层水或原油的溶解和耗散之后才能形成CO2有效聚集。幔源CO2成藏和分布主要受岩浆气源体和气源断裂体系的控制。今后,在超临界CO2及其对油气运移聚集的作用、CO2与深大断裂及火山岩的关系、CO2脱气运移机制、CO与常规烃类油气的耦合差异成藏机制等方面仍需要进一步的研究和探索。     

First finds of Late Tithonian and middle-late Albian radiolarian assemblages in volcanogenic-siliceous rocks of the Amur River right lower reaches and their tectonic significance

The lithological-stratigraphic study of volcanogenic-siliceous rocks developed on the left side of the Machtovaya River, a right tributary of the Amur River, yielded the first radiolarian assemblages of the late Late Tithonian, the late Late Tithonian-early Valanginian, and the middle-late Albian age. It is established that the stratigraphic succession of volcanogenic-siliceous rocks in this area is composed of upper Tithonian-Valanginian dark red to red-brown cherts with basalts in the lower part of the section and Albian dark gray clayey cherts, olive-gray siliceous-tuffaceous argillites, and tufaceous siltstones in its upper part. The replacement of cherts by their clayey varieties likely occurred in the Aptian. The composition, structure, and age of these strata and the rocks constituting the Kiselevka-Manoma accretionary complex are different, which indicates their different tectonic origin.     

A new concept of pedogenic nodule formation in landscapes of the Russian Far East

The typification of ferromanganese nodules (FMN) formed in subaqueous and subaerial settings and in residual materials, as well as FMN localization in various sediments and soils, is discussed. The genetic diversity of morphologically similar FMN and the transformation of FMN-bearing complexes with changes in landscapes have been established.     

Paleomagnetic studies of the Late Mesozoic deformation stage in the southern Primorye region

The analysis of paleomagnetic data available for the southern Primiorye region revealed that the studied objects were magnetized under regional remagnetization presumably during the Late Mesozoic folding and this magnetization can be interpreted as being synfolding. The interpretation is based on the parameter that characterizes the folding completion degree immediately before regional remagnetization. It is shown that the relaxation of Late Mesozoic horizontal stresses was irregular. The obtained estimates of the degree of folding completion are consistent with the available geological data and Talitskii’s model for tectonic deformations.     

松辽盆地宋芳屯油田扶杨油层孔隙结构及其影响因素

通过镜下观察,宋芳屯油田扶杨油层孔隙类型较多,以粒间孔为主。细管压力曲线上看,曲线较陡,分选差,孔隙结构特征参数总体上较差,与孔隙度、渗透率有一定的关系,大的孔隙对渗透率的贡献最大。扶杨油层的孔隙结构较复杂主要由于成岩作用影响,压实作用使孔隙空间显著缩小,胶结作用和自生粘土矿物生长使孔隙进一步缩小和复杂化,后期的溶蚀作用使孔隙空间增加。     

Multi-Scale Texture Modeling

Patterns of crystallographic preferred orientation are referred to as texture. The specific subject of texture analysis is the experimental determination and interpretation of the statistical distribution of orientations of crystals within a specimen of polycrystalline material, which could be metals or rocks. The objective is to relate an observed pattern of preferred orientation to its generating processes and vice versa. In geosciences, texture of minerals in rocks is used to infer constraints on their tectono-metamorphic history. Since most physical properties of crystals, such as elastic moduli, the coefficients of thermal expansion, or chemical resistance to etching depends on crystal symmetry and orientation, the presence of texture imparts directional properties to the polycrystalline material. A major issue of mathematical texture analysis is the resolution of the inverse problem to determine a reasonable orientation density function on SO(3) from measured pole intensities on , which relates to the inverse of the totally geodesic Radon transform. This communication introduces a wavelet approach into mathematical texture analysis. Wavelets on the two-dimensional sphere and on the rotational group SO(3) are discussed, and an algorithms for a wavelet decomposition on both domains following the ideas of Ta-Hsin Li is given. The relationship of these wavelets on both domains with respect to the totally geodesic Radon transform is investigated. In particular, it is shown that the Radon transform of these wavelets on SO(3) are again wavelets on . A novel algorithm for the inversion of experimental pole intensities to an orientation density function based on this relationship is developed.     

自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。