浅析运营期间电力隧道自动化监测技术

针对城市电力隧道结构、走向多变、电缆设施多、电磁干扰大等因素,常规的监测方法难以顺利完成的现状,对目前先进的3种隧道结构自动化监测系统进行深入的研究比较,光纤传感自动技术解决了电力隧道结构监测点布设困难,数据受电磁干扰大的问题,能实时有效、可靠、高精度地监控电力隧道,及时掌握隧道的应力、应变及振动等主要结构参数,确保隧道结构安全。研究对类似的城市电力隧道自动化监测具有一定的参考意义。     

Halin图的色数问题

Halin图G=T∪C,其中T为每一非悬挂点(内点)度数至少为3的平面树,C为连接T的所有悬挂点的圈.文章分别讨论了Halin图的星色数、面色数及分数色数.     

港珠澳大桥沉管隧道贯通误差预计

针对港珠澳大桥沉管隧道的安全贯通问题,该文从隧道外GPS网的布设及施测方法出发,通过多期复测数据评价GPS网具有可靠的测量精度;通过对GPS网点的稳定性分析,阐明了沉管隧道地面控制点位无法长期保留、稳定性差的特点;最后就GPS网引起的贯通误差影响值进行了估算。     

高水压顶管隧道管节修复装置的设计与应用

富春江顶管工程为例,介绍了一种可快速拆卸的用于深埋顶管隧道对管节局部破损进行修复的装置。装置结构简单、紧凑,易于在圆形截面的隧道中进行快速拼装。该装置最高耐水压力0.8 MPa,可对地下水位以下30~80 m顶管隧道中出现沿轴线长＜0.4 m环状破损的管节进行注浆修复。这种设计能够有效解决深埋顶管隧道小面积局部破损、小范围漏水涌砂等问题,为深埋顶管等方法构筑的圆形隧道提供应急修复保障。     

国际油气井钻头进展概述 (四)——PDC钻头发展进程及当今态势（下）

近年来,非平面PDC切削齿,如浅凹面PDC齿、Stinger毒牙中心锥形齿、Stinger毒牙刀翼锥形齿、AxeBlade斧式脊形PDC齿和StayCool保持冷却PDC齿等制造的钻头,逐步在油气钻井中得到有效的应用。这些钻头能够以较高的钻进效率和工作寿命钻进某些硬岩和研磨性地层。为了满足水平钻井,特别在页岩气水平井中能够强力排除岩屑,并具有优良的钻井导向性能,国际著名公司推出了许多新型钻头,如ONXY Ⅱ矛式PDC钻头、Seeker导向PDC钻头、CounterForce反力PDC钻头、Speed快速PDC钻头等用于当代油气钻井,取得了良好的效果。文章还介绍了Defyer DPA套管钻头与CuttPro PDC防剪切保护帽。提出了以下建议：继续深入研究PDC钻头,以提高其性能,更好地满足油气钻井的要求;组合化钻头是油气钻头发展的重要趋势;比金刚石性能更好的钻头切削材料有可能今后发现或合成,可用于制作更佳钻井钻头;我国钻头企业需重组和发展状大;各种钻头技术创新应该加强。     

山岭隧道工程综合地质勘察方法探讨

山岭隧道工程具有隐蔽性、施工复杂性、地层条件和周围环境不确定性等特点,采用科学的勘察方法,是查明隧道岩土体工程地质条件的有效手段。本文以海淀区西山隧道为依托,针对隧道工程勘察中的关键地质问题,运用工程地质测绘、钻探、工程物探、水文地质勘查等综合勘察方法,有效地查明隧址区的地质构造、岩土体结构和地下水分布特征,全面、客观地评价隧道进出口段边坡及仰坡稳定性、隧道围岩质量与稳定性、隧道涌水量、地应力及有害气体等工程地质问题,并针对不良地质现象提出防治对策,以期为工期紧张、地形困难且日趋增多的山岭隧道工程地质勘察,提供可以借鉴的模式和方法。     

Large scale three-dimensional seepage analysis model test and numerical simulation research on undersea tunnel

During the construction process of Qingdao Jiaozhou Bay Undersea Tunnel, the faults and other unfavorable geological discontinuities were often encountered. To study the water inrush mechanism in the faults, both physical model test and numerical analysis were carried out. The results of crown displacement and hydraulic pressure of the monitoring sections in the physical model and numerical model were analyzed in this paper. It was found that the displacement and hydraulic pressure in the process of tunnel construction are often interacted as both cause and effect, and the lower of hydraulic pressure is often accompanied with the growth of its displacement. The changing of the excavation disturbed zone during the excavation in the undersea tunnel was also studied. The results show that the excavation disturbed zone in fault is larger than that in surrounding rock mass, and the excavation disturbance effects in the filling type fault are both transient and persistent. When the displacement and hydraulic pressure in the undersea tunnel change sharply during excavation, there are relatively slow and continuous change trend of the displacement and hydraulic pressure. For practical purposes, to prevent water inrush in the undersea tunnel, more attentions should also be paid to the undersea tunnel after excavation.     

Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

软岩隧道中双层初期支护的应力情况分析

两水隧道穿越的地层主要岩性为炭质千枚岩,地质情况较差,围岩破碎度高,节理发育。自2009年两水隧道开工建设以来,隧道工程问题层出不穷,出现了初期支护开裂、破坏,甚至出现二衬开裂、掉块,仰拱隆起等严重的隧道结构破坏现象,施工进度缓慢。在进口桩号为DK359+712～ DK359+742段采用双层初期支护和单层二次衬砌的支护方式,取得了良好的效果。通过应力情况分析为炭质千枚岩隧道的支护选型提供了依据。     

水平定向勘察技术在长大隧道勘察中的应用现状与展望

西南高山峡谷区是我国重大铁路交通工程规划建设的重点区域,如川藏铁路建设等,深埋、长大隧道数量多,常规垂直孔勘察方法无法满足精细化地质勘察的需求。采用水平定向勘察技术沿隧道设计轴线施工水平定向孔为隧道勘察提供了一种有效的手段。水平定向勘察技术的核心包括钻进技术、取心技术、钻孔轨迹控制技术、随钻测量/随钻测井技术、综合测井技术等。结合国内外水平定向勘察技术的发展应用现状,分析了目前存在的问题,提出了开展单次钻探长度超3000 m的水平定向多工艺钻进关键技术与装备攻关,构建安全、高效、经济合理的水平定向勘察技术体系的建议。