Effect of Groundwater Fluctuations on Pore Pressures and Earth Pressures on Coastal Excavation Retaining Walls

Pore water and earth pressures acting on retaining structures are investigated using an efficient coastal double-layered excavation model to determine offshore excavation responses to groundwater fluctuations outside foundation pits. Total pore water pressure includes excess pore water pressure (due to groundwater fluctuations) and steady pore water pressure (due to steady seepage) determined using one-dimensional consolidation theory of double-layered soil and one-dimensional steady-state flow theory, respectively. Rankine's active and passive earth pressures are obtained from pore water pressure. This method is applicable to arbitrary groundwater fluctuation conditions. How physical parameters affect pore water pressure is numerically investigated using examples, demonstrating the method's practicality for calculating pore water and earth pressures.     

Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

软岩隧道中双层初期支护的应力情况分析

两水隧道穿越的地层主要岩性为炭质千枚岩,地质情况较差,围岩破碎度高,节理发育。自2009年两水隧道开工建设以来,隧道工程问题层出不穷,出现了初期支护开裂、破坏,甚至出现二衬开裂、掉块,仰拱隆起等严重的隧道结构破坏现象,施工进度缓慢。在进口桩号为DK359+712～ DK359+742段采用双层初期支护和单层二次衬砌的支护方式,取得了良好的效果。通过应力情况分析为炭质千枚岩隧道的支护选型提供了依据。     

基于理想点-可拓云模型的隧道围岩稳定性评价

为了对隧道围岩稳定性进行准确评价并解决研究过程中存在的模糊性和随机性以及评价指标不相容的问题,减少单一的主客观赋权法所带来的误差,将云模型引入可拓理论中,利用可拓理论能够实现矛盾问题向相容问题转化的特点和云模型具有处理事物双重不确定性的优势并结合理想点组合赋权法对隧道围岩进行稳定性评价研究。通过文献调研、数据统计的方式,选取具有代表性的6个指标组成隧道围岩评价指标体系,用理想点法赋予评价指标组合权重,并构建可拓云模型对隧道围岩稳定性进行综合评价。通过将此方法应用于工程实例并与其他方法对比,结果表明:基于理想点-可拓云模型的隧道围岩稳定性评价方法能够减少评价过程中存在的不确定性问题,克服单一赋权方法的不足,具有良好的适用性,可以应用于实际工程中。     

PARAMETER AND VARIANCE ESTIMATION IN GEOTECHNICAL BACKANALYSIS USING PRIOR INFORMATION

A probabilistic framework to perform inverse analysis of geotechnical problems is presented. The formulation allows the incorporation of existing prior information on the parameters in a consistent way. The method is based on the maximum likelihood approach that allows a straightforward introduction of the error structure of field measurements and prior information. The difficulty of ascribing definite values to the uncertainties associated with the various types of observations is overcome by including the corresponding variances in the set of parameters to be identified. The inverse analysis results in a minimization problem that is solved by coupling the optimization technique to the finite element method. Two examples are presented to illustrate the performance of the method. The first one corresponds to a synthetic case simulating the excavation of a tunnel. Young's modulus, K₀ value and measurements variances are identified. The second case concerns the excavation of a large underground cavern in which again Young's modulus and K₀ are identified. It is shown that introduction of prior information permits the estimation of parameters more consistent with all available informations that include not only monitored displacements but also results from in situ tests carried out during the site investigation stage.     

THE ‘NEW IMPLICIT METHOD’ FOR TUNNEL ANALYSIS

Tunnel excavation is a coupled three-dimensional problem dealing with two different structures: lining and rockmass. For a simple application it is useful to develop simplified methods by treating the problem as plane strain. If the problem of tunnel face advance presents an axisymmetric geometry, then we show that the major parameter governing the ground–interface–lining interaction is the convergence of the tunnel U₀ at the moment of the lining installation. The ‘New Implicit Method’ (NIM) presented in this paper makes use of principles similar to those of the ‘convergence–confinement’ method, but it provides a better appreciation of the coupled behaviour of rockmass and lining. For independent time constitutive laws (elasticity and plasticity), we point out that the convergence U₀ depends not only on the mechanical behaviour of the rockmass and on the distance from the tunnel face, as predicted by the ‘convergence–confinement’ method, but also on the stiffness of the lining previously set. We present the ‘NIM’ for elastic and perfect elastoplastic rockmasses without dilatancy for many criteria. The development of this new method is based on the results of tunnel calculations with an axisymmetric FEM numerical model that takes into account the three-dimensional aspect of the problem. Using this method is simple and its results agree well with the FEM numerical results. Its accuracy is highly satisfactory for a geotechnical study.     

坐标转换模型在盾构姿态计算中的应用

在附有条件的间接平差模型的基础上,提出用归一化大角度坐标转换模型计算盾构机姿态,并从其原理、方法以及精度上进行了分析。应用结果表明:利用坐标转换法计算盾构机姿态,与常规解方程法相比较更能有效利用参考点的所有信息,计算过程简明,且便于程序实现。     

TSP203在雪峰山隧道施工地质超前预报中的应用研究

介绍了地质超前预报的研究进展和TSP203的工作原理、数据处理、解译技术及其在雪峰山隧道施工地质超前预报中的应用.通过对比分析验证了预报结果的准确性,展示了TSP203探测系统在隧道施工地质超前预报中的广阔前景.     

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.     

Parametric Vibration Analysis of Submerged Floating Tunnel Tension Legs

According to the characteristics of submerged floating tunnel anchored by tension legs,simplifying the tube as point mass and assuming that the tension leg is a nonlinear beam model hinged at both ends,the nonlinear vibration equation of the tension leg is derived.The equation is solved by the Galerkin method and Runge Kutta method.Subsequently,numerical analysis of typical submerged floating tunnel tension leg is carried out.It is shown that,the parametric vibration response of the submerged floating tunnel tension leg is related to the amplitude and frequency of the end excitation.Without considering axial resonance and transverse resonance,it is reasonable that higher order modes are abandoned and only the first three modes are considered.The axial resonance amplitude of the second or third order mode is equivalent to the first order mode axial resonance amplitude,which should not be ignored.