Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

饱水黄土隧道变形规律研究

新松树湾隧道位于饱和的砂粘土中,土体的稳定性极差,施工难度较大。为此,在隧道施工期间,通过土工试验、隧道收敛和围岩内部位移的现场监测、隧道变形的三维有限元仿真计算等手段,对该隧道的变形规律进行了系统研究,获得了大量试验数据。研究成果对隧道的施工组织和支护参数的确定起到了重要作用,为此类隧道的施工积累了经验。     

深基坑复合喷锚支护技术探讨

工程实践表明,复合喷锚支护是一种有效的深基坑支护型式,它可用于土层条件差、安全性要求高、变形控制严格的基坑工程中。复合支护中锚杆为主要受力构件,竖向花管为辅助受力构件,可起到限制、减小土体变形的作用。由于竖向注浆花管的加入,花管及注浆体抗剪作用加强,使基坑的整体稳定性得以大幅度提高。探讨了复合喷锚支护整体稳定性分析方法,建议将滑动区域分为加固土和原土两部分,将锚管注浆形成的注浆体等效为一层加固土,按喷锚支护模型计算复合喷锚支护整体稳定性。     

盾构隧道壁后注浆效果的雷达探测研究

盾构隧道的纵向力学与变形性态研究,尤其是盾尾壁后注浆效果已经引起国内外学者的广泛关注,笔者首次利用探地雷达方法,对上海某盾构隧道盾尾壁后注浆分布进行探测,并进行了初步的分析,结果表明,利用该方法可有效地探测隧道壁后的注浆分布,为隧道纵向力学变形性态的控制提供一定依据。     

矩形高层建筑扭转动力风荷载解析模型

本文通过研究不同长宽比、高宽比的矩形棱柱体在边界层风洞中典型攻角下的扭矩，提出了矩形高层建筑扭矩功率谱密度、均方根扭矩系数和Strouhal数的经验公式，并对相干函数作了一定的探讨，建立了完整的扭转动力风荷载解析模型。该模型和试验结果吻合较好，证明它是合理有效的，可在此基础上建立高层建筑扭转动力响应频域计算方法。     

北京正负电子对撞机注入器复测分析

介绍北京正负电子对撞机注和器复测的精度要求，阐述采用波带板激光准直系统与精密水准测量相结合的方法，进行注入器复测的观测、数据处理与调整。根据复测数据分析了隧道地基变形与加速管位置变形及其规律，提出了一些有益的结论与建议。     

铁路隧道GPS网布设的精度分析

探讨了隧道ＧＰＳ网在设计阶段估算横向贯通误差的基本理论，对按该理论编制的软件进行了计算正确性的验证。结合铁路测量规则对不同长度的隧道ＧＰＳ网横向贯通误差进行了计算分析，提出了分设隧道ＧＰＳ网的一些基本原则和隧道ＧＰＳ网横向贯通误差的近似估算方法     

边坡及其它类工程地质问题研究

本文提出有关边坡工程地质研究方面的一些新概念，看法和问题，并概述了属地这一专题的边坡及其它各类工程地质问题的研究成果。     

锚杆在坡残积土中锚固机理的探讨

根据深圳市文锦广场深基坑喷锚支护及锚杆拉拔试验成果，探讨砂浆锚杆和摩擦锚杆在坡残积土中的锚固机理，认为砂浆锚杆锚固力主要取决于砂浆与坡残积土的一系列物理化学作用；摩擦锚杆锚固力主要取决于锚杆与土体间的摩擦力。     

隧道支护结构荷载作用的随机反演

提出荷载－结构模式进行随机反分析方法，从隧道支护结构变形反算对应的荷载作用，可反推围岩抗力系数和覆土荷载的分布情况，以及作用于支护结构上各部位的外荷载。提出了以实测位移为基础的样条函数插值．以插值位移补充大量的实测值，满足了反分析所需众多的已知位移数。通过一施工实例对该方法的可行性进行了检验。