Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

软岩隧道中双层初期支护的应力情况分析

两水隧道穿越的地层主要岩性为炭质千枚岩,地质情况较差,围岩破碎度高,节理发育。自2009年两水隧道开工建设以来,隧道工程问题层出不穷,出现了初期支护开裂、破坏,甚至出现二衬开裂、掉块,仰拱隆起等严重的隧道结构破坏现象,施工进度缓慢。在进口桩号为DK359+712～ DK359+742段采用双层初期支护和单层二次衬砌的支护方式,取得了良好的效果。通过应力情况分析为炭质千枚岩隧道的支护选型提供了依据。     

THE ‘NEW IMPLICIT METHOD’ FOR TUNNEL ANALYSIS

Tunnel excavation is a coupled three-dimensional problem dealing with two different structures: lining and rockmass. For a simple application it is useful to develop simplified methods by treating the problem as plane strain. If the problem of tunnel face advance presents an axisymmetric geometry, then we show that the major parameter governing the ground–interface–lining interaction is the convergence of the tunnel U₀ at the moment of the lining installation. The ‘New Implicit Method’ (NIM) presented in this paper makes use of principles similar to those of the ‘convergence–confinement’ method, but it provides a better appreciation of the coupled behaviour of rockmass and lining. For independent time constitutive laws (elasticity and plasticity), we point out that the convergence U₀ depends not only on the mechanical behaviour of the rockmass and on the distance from the tunnel face, as predicted by the ‘convergence–confinement’ method, but also on the stiffness of the lining previously set. We present the ‘NIM’ for elastic and perfect elastoplastic rockmasses without dilatancy for many criteria. The development of this new method is based on the results of tunnel calculations with an axisymmetric FEM numerical model that takes into account the three-dimensional aspect of the problem. Using this method is simple and its results agree well with the FEM numerical results. Its accuracy is highly satisfactory for a geotechnical study.     

坐标转换模型在盾构姿态计算中的应用

在附有条件的间接平差模型的基础上,提出用归一化大角度坐标转换模型计算盾构机姿态,并从其原理、方法以及精度上进行了分析。应用结果表明:利用坐标转换法计算盾构机姿态,与常规解方程法相比较更能有效利用参考点的所有信息,计算过程简明,且便于程序实现。     

TSP203在雪峰山隧道施工地质超前预报中的应用研究

介绍了地质超前预报的研究进展和TSP203的工作原理、数据处理、解译技术及其在雪峰山隧道施工地质超前预报中的应用.通过对比分析验证了预报结果的准确性,展示了TSP203探测系统在隧道施工地质超前预报中的广阔前景.     

Parametric Vibration Analysis of Submerged Floating Tunnel Tension Legs

According to the characteristics of submerged floating tunnel anchored by tension legs,simplifying the tube as point mass and assuming that the tension leg is a nonlinear beam model hinged at both ends,the nonlinear vibration equation of the tension leg is derived.The equation is solved by the Galerkin method and Runge Kutta method.Subsequently,numerical analysis of typical submerged floating tunnel tension leg is carried out.It is shown that,the parametric vibration response of the submerged floating tunnel tension leg is related to the amplitude and frequency of the end excitation.Without considering axial resonance and transverse resonance,it is reasonable that higher order modes are abandoned and only the first three modes are considered.The axial resonance amplitude of the second or third order mode is equivalent to the first order mode axial resonance amplitude,which should not be ignored.     

湍流度随高度的变化及其对城市宏观地形的依赖

分别构建广州主建成区垂直比例尺为1﹕2 000、1﹕1 000和1﹕500的3个建筑物模型,利用大型边界层风洞,在西北和东南两风向下,基于中性流模拟分析了复杂城市地形下湍流度随高度的变化及其对宏观地形的依赖。结果表明：风廓线指数α与不同高度的湍流度之间的关系密切,利用现有模型,根据4类粗糙度边界层和不同垂直比例尺,可确定相应的湍流度随高度变化模型的主要系数,预测精度高。城市地形下最大湍流度面发育在0~0.2 h之间狭窄的范围内。用湍流度形态指数β来表征湍流度随高度的变化,无论城市屋脊还是平坦地形,随着风程区的延伸,廓线的指数α升高,湍流度形态指数β降低。表明同一高度湍流度值具有由迎风区、丘顶区向背风区增高,沿风程逐渐增大的规律,对地形部位和风程的依赖性强,与来流翻越简单地形时的特征一致。     

不同结构林带防风效能风洞模拟

防风林带结构是影响防风效能的主要因素。建立不同宽度、不同株行距林带防风效能与林带后距离之间的统计模型,可以为防风林建设提供指导性意见。通过风洞实验,在11 m·s^-1风速下,对4种宽度、5种株行距林带的背风面0~10H（H为林带高度）的风速进行测定,采用曲线参数估计法、傅立叶模型、SSF模型（Sum of Sin Functions）,构建了不同结构林带防风效能与林带后距离间的统计模型。结果表明：傅立叶模型拟合不同宽度林带的防风效能与林带后距离的关系效果最优,可决系数（R²）均在98%以上;SSF模型拟合不同株行距林带的防风效能与林带后距离的关系效果最优（R²>0.98）。根据构建的统计模型,风速为11 m·s^-1左右时,林带宽度8 m（两行一带）的防风林的防风效能存在明显优势;5种株行距的林带中,株行距为8 m×8 m的防风林带本试验条件下防风效果最好。     

陀螺全站仪在隧道测量中的应用研究

随着我国经济和科技的蓬勃发展,隧道工程建设也呈现出规模化和多元化的趋势。本文首先总结了我国公路隧道、铁路隧道和水下隧道的增长状况;然后归纳了隧道测量中平面控制网的布设方法;最后通过分析发现:通过陀螺全站仪加测陀螺边来传递方位基准,可有效提高隧道贯通精度。     

海底隧道防排水技术浅析——以厦门翔安海底隧道为例

由于海底隧道的特殊性,其防排水技术与一般陆地隧道有着显著区别,本文介绍了厦门翔安海底隧道的防排水方案设计情况,对方案实施效果进行了评估．得出了海底隧道防排水应结合围岩与支护的自防水功能采取以堵为主的原则,并针对海底隧道防排水方案实施中的问题,提出了对初期支护背后注浆是重点,改进注浆材料等建议．从而论述了防排水技术是海底隧道工程建设的核心问题．